| The integrated model for quality improvement for semiconductor companies_Nur Syazwani Abd Suki
| 2020-05-19 11:03:38.269 | 1 | 0 |
| Effect of supercharging and turbocharging in a multi cylinder low speed spark ignition engine fuelled by producer gas / Mohd Saiful Aizat Mohd Shafie
| 2020-05-19 11:00:33.16 | 1 | 0 |
| Development of reverse engineering system for generating 3d cad body from 2d image / Nur Ilham Aminullah Abdulqawi
| 2020-03-17 15:49:52.917 | 1 | 0 |
| Automated core and cavity design system for mould works using generative method of computer aided process planning / Mursyidah Md Yusof
| 2020-03-12 15:35:52.509 | 1 | 0 |
| Optimization of v-bending of aluminium aa6061 strip of non-uniform profile using the taguchi method / Mohd Fitri Adnan
| 2020-03-12 12:32:31.123 | 1 | 0 |
| Constraint loss estimation schemes in deep and shallow three-dimensional crack tip fields / Leong Karh Heng
| 2020-03-05 10:26:58.27 | 1 | 0 |
| Detection and classification of impact-induced delamination in fiberglass pre-impregnated laminated composites from ultrasonic a-scan signal using artificial intelligence / Muhammad Faisal Mahmod
| 2020-03-03 12:10:16.045 | 1 | 0 |
| Kesan penambahan air dalam reaktor haba bermangkin bagi penyingkiran tar gas pengeluar / Aris Warsita Dahlani
| 2020-03-03 11:51:04.776 | 1 | 0 |
| Partial pose estimation of rigid object system using cad database / Zuliani Zulkoffli
| 2020-03-02 16:31:28.421 | 1 | 0 |
| Detection of chipping in ceramic cutting inserts from workpiece profile signature during turning process using machine vision / Lee Woon Kiow
| 2020-03-02 14:49:17.318 | 1 | 0 |
| Thermal performance of computer micro-processor using microchannel heat sink with nanofluids / Tony Tan Hin Joo
| 2020-03-02 12:23:39.641 | 1 | 0 |
| Ballistic impact performance of wet lamination kega / Husri Husain
| 2020-03-02 11:46:16.041 | 1 | 0 |
| Hybrid cfd-nnarx modelling of single mrf valve for visual servoing / Muhamad Husaini Abu Bakar
| 2020-01-28 16:05:04.151 | 1 | 0 |
| Hydrothermal and vapothermal carbonization of agricultural wastes to produce solid fuels / Yeoh Keat Hor
| 2019-11-11 16:18:19.396 | 1 | 0 |
| Signal response based on speed and reaction of otto cycle engine / Muhammad Zaim Mohamed Pauzi
| 2019-10-31 16:16:44.243 | 1 | 0 |
| Development of integrated lean six sigma model for small and medium enterprise / Joshua Chan Ren Jie
| 2019-10-31 15:53:49.868 | 1 | 0 |
| Integration of dmaic methodology and capa concept for quality improvement in semiconductor industry / Nurul Aida Harun
| 2019-10-25 15:52:47.869 | 1 | 0 |
| Numerical simulation on the performances and emissions of the direct injection compression ignition engine
| 2019-08-27 11:43:34.928 | 1 | 0 |
| Implementation of proportional, integral and derivative(pid) terms for thermal management through simulink and arduino platform
| 2019-08-27 11:30:29.826 | 1 | 0 |
| Dry abrasion of bio fibre and bio-shell reinforced polymer / Nurul Husna Wan Noor
| 2019-02-15 16:26:53.9 | 1 | 0 |
| Development of the multi axes human spine tester / Siew Jun Soon
| 2019-02-15 15:34:28.58 | 1 | 0 |
| Development of surface acoustic wave (saw) device using photolithograhy technique prepared / Norian Abdul Rahman
| 2019-01-31 17:05:50.66 | 1 | 0 |
| Development of multi axes human spine tester / Chung Boon Keat
| 2019-01-31 16:59:03.65 | 1 | 0 |
| Development of digital image correlation method for measurement of in-plane displacement and strain in rubber using a flatbed scanner / Neoh Boon Ping
| 2019-01-31 16:52:20.735 | 1 | 0 |
| Development of decision making model for optimal maintenance policy selection by using topsis – a case study in semi conductor industry / Thor Jureen
| 2019-01-31 16:45:05.7 | 1 | 0 |
