Professor Dr. Megat Azmi Megat Johari

(For USM Staff/Student Only)

The Researcher page of

Professor Dr. Megat Azmi Megat Johari

Researcher Information

Title:

Professor Dr. Megat Azmi Megat Johari

Department(s):

School of Civil Engineering

Location:

Engineering Campus Universiti Sains Malaysia

Phone:

6045996259

Email:

cemamj@usm.my

Fax:

6045996259

Links

USM Experts

Scopus ID

Google Scholar ID

Researcher ID

Qualifications:
B.Sc., Civil Engineering (Ohio, U. S.), M.Sc. Eng., Concrete (Leeds, UK), Ph.D., Concrete (Leeds, UK).

Expertise:
Concrete. Mineral and Chemical Admixtures. Current position: Lecturer of Universiti Sains Malaysia, School of Civil Engineering

Research

Google Scholar
- Article
  - 11 factors affecting the autogenous shrinkage OF silica fume high-strength concrete - (1999) Autogenous Shrinkage of Concrete: CRC Press, pp. 195
  - 5 GUSMRC–From concept to structural application - (2017) Green Comp Mater Manuf Eng, 7, pp. 133
  - [Retracted] Performance of High Strength Concrete Containing Palm Oil Fuel Ash and Metakaolin as Cement Replacement Material - (2022) Advances in Civil Engineering: Hindawi, 2022 (1), pp. 6454789
  - A general relation between sums of cubes and triangular pyramidal numbers - (2012) AIP Conference Proceedings: American Institute of Physics, 1450 (1), pp. 275-279
  - A Review of the Role of Self-Compacting Concrete on Sustainable Development. - (2012) Australian Journal of Basic & Applied Sciences, 6 (9)
  - A study of relative humidity sensor on micro-ball resonator - (2019) Journal of Physics: Conference Series; IOP Publishing, 1371 (1), pp. 012009
  - A sustainable enhancement of bio-cement using immobilised Bacillus sphaericus: Optimization, microstructural properties, and techno-economic analysis for a cleaner production of bio-cementitious mortars - (2021) Journal of Cleaner Production: Elsevier, 318, pp. 128470
  - Acoustic Emission (Ae) Techniques For The Damage Assessment Of Structures. - (2012) Universiti Sains Malaysia
  - Ammoniacal nitrogen and COD removal from semi-aerobic landfill leachate using a composite adsorbent: fixed bed column adsorption performance - (2010) Journal of hazardous materials: Elsevier, 175 (1-3), pp. 960-964
  - Ammoniacal nitrogen and COD removal from semi-aerobic landfill leachate using carbon-mineral composite adsorbent - (2008) roceeding of The International Seminar on Chemistry, Universitas Padjajaran, Jatinangor, Indonesia, pp. 722-728
  - An Attack on N= p2q with Partially Known Bits on the Multiple of the Prime Factors - (2021) Malaysian Journal of Mathematical Sciences 15(S), pp. 63–75
  - Application of image processing for detection of corrosion using ground penetrating radar - (2010) Proceedings of the e th International Conference on Information Communication Technology and Systems
  - Application of response surface methodology for optimizing the compressive strength of green ultra high strength concrete using silica fume - (2024) Journal of Building Pathology and Rehabilitation: Springer International Publishing, 9 (1), pp. 5
  - Assessment of adhesion between RPC overlay and existing concrete substrate - (2015) Applied Mechanics and Materials: Trans Tech Publications Ltd, 802, pp. 95-100
  - Assessment of corroded reinforced concrete beams: Cyclic load test and acoustic emission techniques - (2020) Construction and Building Materials: Elsevier, 233, pp. 117291
  - Autogenous Shrinkage: Early Age Measurement and Effect of Mineral Admixtures - (2000) Universiti Sains Malaysia
  - Bassam A. Tayeh, BH Abu Bakar & MA Megat Johari - (2013) Mater Struct, 46, pp. 743-753
  - Bond strength of the interface between normal concrete substrate and GUSMRC repair material overlay - (2019) Construction and Building Materials: Elsevier, 216, pp. 261-271
  - Bound on Some Diophantine Equation - (2022) Menemui Matematik (Discovering Mathematics), 44 (1), pp. 28-34
  - Characteristics of treated palm oil fuel ash and its effects on properties of high strength concrete - (2013) Advanced materials research: Trans Tech Publications Ltd, 626, pp. 152-156
  - Characterization of metakaolin treated at different calcination temperatures - (2017) AIP Conference Proceedings: AIP Publishing, 1892 (1)
  - Characterization of the interfacial bond between old concrete substrate and ultra high performance fiber concrete repair composite - (2013) Materials and structures: Springer Netherlands, 46, pp. 743-753
  - Chloride diffusion and chloride-induced corrosion of steel embedded in natural pozzolan-based alkali activated concrete - (2020) Construction and Building Materials: Elsevier, 262, pp. 120669
  - Cockle shell ash replacement for cement and filler in concrete - (2013) Malaysian Journal of Civil Engineering, 25 (2)
  - Comparison study of ammonia and COD adsorption on zeolite, activated carbon and composite materials in landfill leachate treatment - (2010) Desalination: Elsevier, 262 (1-3), pp. 31-35
  - Compressive Strength Development of Geopolymer Mortar by Utilization Slag and Fly Ash Mixtures - (2019) International Journal of Engineering and Advanced Technology (IJEAT): Blue Eyes Intelligence Engineering & Sciences Publication, 9 (2), pp. 4066-4069
  - Compressive strength of geopolymer concrete from volcanic ash calcination - (2023) AIP Conference Proceedings: AIP Publishing, 2741 (1)
  - Compressive strength of treated palm oil fuel ash based geopolymer mortar containing calcium hydroxide, aluminum hydroxide and silica fume as mineral additives - (2015) Cement and Concrete Composites: Cement and Concrete Composites, 60, pp. 65-81
  - Compressive stress-strain behavior of composite ordinary and reactive powder concrete - (2013) Iranica Journal of Energy & Environment: Babol Noshirvani University of Technology, 4 (3)
  - Damage evaluation of reinforced concrete beams with varying thickness using the acoustic emission technique - (2013) Construction and Building materials: Elsevier, 44, pp. 812-821
  - Deformation of High Strength Concrete Containing Mineral Admixtures - (2000) University of Leeds (School of Civil Engineering)
  - Development and evaluation of basaltic volcanic ash based high performance concrete incorporating metakaolin, micro and nano-silica - (2024) Developments in the Built Environment: Elsevier, 17, pp. 100330
  - Development of engineering and transport properties of green high strength concrete utilizing ternary blended binders - (2021) European Journal of Environmental and Civil Engineering: Taylor & Francis, 25 (7), pp. 1251-1267
  - Development of green ultra-high performance fiber reinforced concrete containing ultrafine palm oil fuel ash - (2013) Construction and Building Materials: Elsevier, 48, pp. 379-389
  - Durability performance of palm oil fuel ash-based engineered alkaline-activated cementitious composite (POFA-EACC) mortar in sulfate environment - (2017) Construction and Building Materials: Elsevier, 131, pp. 229-244
  - Effect of admixtures on the setting times of high-strength concrete - (2000) Cement and concrete Composites: Elsevier, 22 (4), pp. 293-301
  - Effect of alkaline activator ratio on the compressive strength response of POFA-EACC mortar subjected to elevated temperature - (2021) Materials at High Temperatures: Taylor & Francis, 38 (3), pp. 166-176
  - Effect of alkaline activators and binder content on the properties of natural pozzolan-based alkali activated concrete - (2017) Construction and Building Materials: Elsevier, 147, pp. 648-660
  - Effect of alkaline activators on the fresh properties and strength of silico-manganese fume-slag activated mortar - (2020) Adv Concr Constr, 10 (5), pp. 403-416
  - Effect of delay time and Na2SiO3 concentrations on compressive strength development of geopolymer mortar synthesized from TPOFA - (2015) Construction and Building Materials: Elsevier, 86, pp. 64-74
  - Effect of fineness of palm oil fuel ash on compressive strength and microstructure of alkaline activated mortar - (2019) European Journal of Environmental and Civil Engineering: Taylor & Francis, 23 (2), pp. 136-152
  - Effect of metakaolin on creep and shrinkage of concrete - (2001) Cement and concrete composites: Elsevier, 23 (6), pp. 495-502
  - Effect of NaOH Molarity on the Strength and Microstructure of Natural Pozzolan-Based AAC - (2018) MATEC Web of Conferences: EDP Sciences, 203, pp. 06017
  - Effect of Polyethylene Terephthalate (PET) in Development of Green Roller Compacted Concrete - (2023) Construction Technologies and Architecture: Trans Tech Publications Ltd, 10, pp. 31-39
  - Effect of rice husk ash to the performance of concrete block - (2011) International Journal of Applied Science & Technology, 1 (3), pp. 53
  - Effect of superplasticizer dosage on workability and strength characteristics of concrete - (2016) IOSR Journal of Mechanical and Civil Engineering, 13 (4), pp. 153-158
  - Effect of the incorporation of PET fiber and ternary blended binder on the flexural and tensile behaviour of ultra-high performance green concrete - (2022) Construction and Building Materials: Construction and Building Materials, 331, pp. 127306
  - Effect of various commercial of Na2SiO3 on compressive strength of Fly ash-based alkaline activated mortar - (2020) IOP Conference Series: Materials Science and Engineering: IOP Publishing, 801 (1), pp. 012078
  - Effect of volcanic ash as partial replacement of ground-granulated blast-furnace slag based alkaline activated mortar - (2022) Journal of Physics: Conference Series: IOP Publishing, 2193 (1), pp. 012059
  - Effect of ZnO nanomaterials coated glass growth duration to the adjacent microfiber light transmission at room temperature - (2021) Journal Fotonik, 2 (1), pp. 8-14
  - Effects of addition of Al (OH) 3 on the strength of alkaline activated ground blast furnace slag-ultrafine palm oil fuel ash (AAGU) based binder - (2014) Construction and Building Materials: Elsevier, 50, pp. 361-367
  - Effects of bars slippage on the pre-and post-heating flexural behavior of FRP reinforced concrete beams: Experimental and theoretical investigations - (2019) International Journal of Civil Engineering and Technologes, 10, pp. 574-602
  - Effects of coal bottom ash on the compressive strength of portland cement mortar - (2015) Applied Mechanics and Materials: Trans Tech Publications Ltd, 802, pp. 149-154
  - Effects of drying and salt extraction of Moringa oleifera on its coagulation of high turbid water - (2010) J Am Sci, 6 (10), pp. 387-391
  - Effects of H2O/Na2O molar ratio on the strength of alkaline activated ground blast furnace slag-ultrafine palm oil fuel ash based concrete - (2014) Materials & Design (1980-2015): Elsevier, 56, pp. 158-164
  - Effects of Incorporating Oil Palm Mesocarp Fiber as Partial Replacement of Fine Aggregate on the Sound Absorption Performance and Mechanical Properties of Standard Concrete - (2024) Arabian Journal for Science and Engineering: Springer Berlin Heidelberg, pp. 1-16
  - Efficiency of high performance fiber reinforced cementitious composites as a retrofit material for fire-damaged concrete - (2022) Materials Today: Proceedings; Elsevier, 61, pp. 477-486
  - Efficiency of treated and untreated palm oil fuel ash as a supplementary binder on engineering and fluid transport properties of high-strength concrete - (2016) Construction and building materials: Elsevier, 125, pp. 1066-1079
  - Elasticity of Calcium Silicate Brick Masonry Wall Due to Sulphate Attack - (2010) Advanced Materials Research: Trans Tech Publications Ltd, 133, pp. 195-200
  - Engineering and transport properties of high-strength green concrete containing high volume of ultrafine palm oil fuel ash - (2012) Construction and Building Materials: Elsevier, 30, pp. 281-288
  - Engineering properties of normal concrete grade 40 containing rice husk ash at different grinding time - (2011) Advances in Materials Science, 11 (1), pp. 5-16
  - Enhancing the engineering properties and microstructure of room temperature cured alkali activated natural pozzolan based concrete utilizing nanosilica - (2018) Construction and Building Materials: Elsevier, 189, pp. 352-365
  - Enhancing the properties of UPOFA-based geopolymer mortar via the incorporation of eggshell ash and silica fume - (2023) Journal of Building Engineering: Elsevier, 65, pp. 105677
  - Ergodicity of power series-maps on the simplexes of group algebras of finite groups - (2017) Journal of Physics: Conference Series: IOP Publishing, 949 (1)
  - Evaluation of bond strength between normal concrete substrate and ultra high performance fiber concrete as a repair material - (2013) Procedia Engineering: Elsevier, 54, pp. 554-563
  - Evaluation of properties of steel fiber reinforced GGBFS-based geopolymer composites in aggressive environments - (2022) Construction and Building Materials: Elsevier, 345, pp. 128339
  - Evaluation of slag-blended alkaline-activated palm oil fuel ash mortar exposed to the sulfuric acid environment - (2015) Journal of Materials in Civil Engineering: American Society of Civil Engineers, 27 (12), pp. 04015058
  - Evaluation of the mechanical properties, microstructure, and environmental impact of mortar incorporating metakaolin, micro and nano-silica - (2024) Case Studies in Construction Materials: Elsevier, 20, pp. e02699
  - Evaluation of ultra-high-performance-fiber reinforced concrete binder content using the response surface method - (2013) Materials & Design (1980-2015): Elsevier, 52, pp. 957-965
  - Evolution of alkaline activated ground blast furnace slag–ultrafine palm oil fuel ash based concrete - (2014) Materials & Design: Elsevier, 55, pp. 387-393
  - Evolution of room-cured alkali-activated silicomanganese fume-based green mortar designed using Taguchi method - (2021) Construction and Building Materials: Elsevier, 307, pp. 124970
  - Existing concrete textures: their effect on adhesion with fibre concrete overlay - (2014) Proceedings of the Institution of Civil Engineers-Structures and Buildings: Thomas Telford Ltd, 167 (6), pp. 355-368
  - Experimental assessment of rebar corrosion in concrete slab using ground penetrating radar (GPR) - (2018) International Journal of Corrosion: Hindawi, 2018 (1), pp. 5389829
  - Exponential Sums for Eighth Degree Polynomial - (2020) Malaysian Journal of Mathematical Sciences, 14 (1), pp. 115-138
  - Extended Bounds of Beatty Sequence Associated with Primes - (2019) International Journal of Engineering and Advanced Technology, pp. 115-118
  - Flexural performance of green engineered cementitious composites containing high volume of palm oil fuel ash - (2012) Construction and Building Materials: Elsevier, 37, pp. 518-525
  - Flexural strength behavior of composite UHPFC-existing concrete - (2013) Advanced Materials Research: Trans Tech Publications Ltd, 701, pp. 32-36
  - Fluid transport properties of normal concrete substrate and a new green fiber reinforced concrete overlay composite - (2019) Structural Concrete: WILEY‐VCH Verlag GmbH & Co. KGaA, 20 (5), pp. 1771-1780
  - Fracture and tensile characteristics of engineered cementitious composites containing POFA - (2013) Advances in cement research: Thomas Telford Ltd, 25 (4), pp. 189-199
  - Geo-Environmental: Behaviour of Metakaolin Concrete in Different Curing Condition - (2013) International Journal of Civil Engineering and Geo-Environmental: UMP Publisher, 4
  - Green composites: materials, manufacturing and engineering - (2017) Walter de Gruyter GmbH & Co KG, 7
  - Green Composites: Materials, Manufacturing and Engineering Advanced composites - (2017) Kazan Federal University Digital Repository
  - Hafnium Bismuth Erbium Co-Doped Fiber Based Dark Pulses Generation With Black Phosphorus As Saturable Absorber - (2021) Journal of Physics: Conference Series: IOP Publishing, 2075 (1), pp. 012018
  - High cycle fatigue and corrosion behaviors of Mg3Zn/HA biodegradable composite - (2024) Journal of Materials Research and Technology: Elsevier, 28, pp. 695-706
  - Hydration reaction of pozzolanic binders containing RHA and GGBS - (2023) AIP Conference Proceedings: AIP Publishing, 2881 (1)
  - Image processing for corrosion quantification in concrete slabs using GPR data - (2020) Journal of Physics: Conference Series: IOP Publishing, 1471 (1), pp. 012049
  - Immobilization of Bacillus sphaericus with Palm Oil Fuel Ash for Self-healing in the Mortar - (2020) IOP Conference Series: Earth and Environmental Science: IOP Publishing, 616 (1), pp. 012018
  - Impact of added water and superplasticizer on early compressive strength of selected mixtures of palm oil fuel ash-based engineered geopolymer composites - (2016) Construction and Building Materials: Elsevier, 109, pp. 198-206
  - Impact of Al (OH) 3 addition to POFA on the compressive strength of POFA alkali-activated mortar - (2018) Construction and Building Materials: Elsevier, 190, pp. 65-82
  - Impact of slag content and curing methods on the strength of alkaline-activated silico-manganese fume/blast furnace slag mortars - (2019) Arabian Journal for Science and Engineering: Springer Berlin Heidelberg, 44, pp. 8325-8335
  - Impacts of silica modulus on the early strength of alkaline activated ground slag/ultrafine palm oil fuel ash based concrete - (2015) Materials and Structures: Springer Netherlands, 48, pp. 733-741
  - Improving Damaged Reinforced Concrete Beam Failure Behavior Using Externally Bonded UHPFRCCs System - (2023) International Journal of Civil Engineering: Springer International Publishing, 21 (1), pp. 67-79
  - Improving the engineering and fluid transport properties of ultra-high strength concrete utilizing ultrafine palm oil fuel ash - (2014) Journal of Advanced Concrete Technology: Japan Concrete Institute, 12 (4), pp. 127-137
  - Influence of calcination temperature on characteristics and pozzolanic activity of palm oil waste ash. - (2011), 5 (11), pp. 1010-1018
  - Influence of cement content on the compressive strength and engineering properties of palm oil fuel ash-based hybrid alkaline cement - (2020) Third International Conference on Technical Sciences (ICST2020), Tripoli-Libya, pp. 19-21
  - Influence of composition and concentration of alkaline activator on the properties of natural-pozzolan based green concrete - (2019) Construction and Building Materials: Elsevier, 201, pp. 186-195
  - Influence of curing methods and concentration of NaOH on strength of the synthesized alkaline activated ground slag-ultrafine palm oil fuel ash mortar/concrete - (2014) Construction and Building Materials: Elsevier, 66, pp. 541-548
  - Influence of fiber content on the interfacial bond strength of synthetic polypropylene fiber concrete - (2009) ESTEEM Academic Journal: Universiti Teknologi MARA, Pulau Pinang & Pusat Penerbitan Universiti (UPENA), 5 (1), pp. 79-89
  - Influence of heat curing period and temperature on the strength of silico-manganese fume-blast furnace slag-based alkali-activated mortar - (2020) Construction and Building Materials: Elsevier, 251, pp. 118961
  - Influence of Initial Silica Modulus of Na2SiO3 on the Compressive Strength of Alkali Activated Ultrafine Palm Oil Fuel Ash Based Mortar - (2015) Applied Mechanics and Materials: Trans Tech Publications Ltd, 802, pp. 202-207
  - Influence of metakaolin as partially cement replacement minerals on the properties of cement and concrete - (2012) Scientific Research Journal: Research Management Institute, 9 (2), pp. 33-47
  - Influence of milling process of palm oil fuel ash on the properties of palm oil fuel ash-based alkali activated mortar - (2022) Case Studies in Construction Materials: Elsevier, 16, pp. e00857
  - Influence of nano-SiO2 on the strength and microstructure of natural pozzolan based alkali activated concrete - (2018) Construction and Building Materials: Elsevier, 173, pp. 573-585
  - Influence of palm oil fuel ash on behaviour of green high-performance fine-grained cement mortar - (2022) Advances in materials Research: Techno-Press, 11 (2), pp. 121-146
  - Influence of palm oil fuel ash on properties of high-strength green concrete - (2019) Scientific Journal of King Faisal University Basic and Applied Sciences, 20
  - Influence of palm oil fuel ash on ultimate flexural and uniaxial tensile strength of green ultra-high performance fiber reinforced cementitious composites - (2014) Materials & Design (1980-2015): Elsevier, 54, pp. 694-701
  - Influence of pore structure on the properties of green concrete derived from natural pozzolan and nanosilica - (2020) Journal of Sustainable Cement-Based Materials: Taylor & Francis, 9 (4), pp. 233-257
  - Influence of Silica Fume Inclusion on the Compressive Strength Development of High Strength Concrete Containing High Volume of Palm Oil Fuel Ash - (2015) Applied Mechanics and Materials: Trans Tech Publications Ltd, 802, pp. 214-219
  - Influence of SiO2, Al2O3, CaO, and Na2O on the elevated temperature performance of alkali‐activated treated palm oil fuel ash‐based mortar - (2021) Structural Concrete: WILEY‐VCH Verlag GmbH & Co. KGaA, 22, pp. E380-E399
  - Influence of Steam Curing on the Performance of High-strength Concrete Incorporating Metakaolin - (2024) Periodica Polytechnica Civil Engineering
  - Influence of steam curing regimes on the properties of ultrafine POFA-based high-strength green concrete - (2021) Journal of Building Engineering: Elsevier, 38, pp. 102204
  - Influence of sulfate and chloride on the mechanical properties of fired clay masonry wall - (2012) International Journal of Integrated Engineering: Universiti Tun Hussien Onn Malaysia, 4 (2), pp. 29-38
  - Influence of sulphate attack on elasticity of fired clay brick masonry wall - (2010) Advances and Trends in Structural Engineering, Mechanics and Computation: CRC Press, pp. 254
  - Influence of Sulphate on the Moisture Movement of Calcium Silicate Brick Masonry Wall - (2010) Advanced Materials Research: Trans Tech Publications Ltd, 133, pp. 201-204
  - Influence of superplasticizer compatibility on the setting time, strength and stiffening characteristics of concrete - (2016) Advances in Applied Sciences, 1 (2), pp. 30-36
  - Influence of supplementary cementitious materials on engineering properties of high strength concrete - (2011) Construction and Building Materials: Elsevier, 25 (5), pp. 2639-2648
  - Influence of treated palm oil fuel ash on compressive properties and chloride resistance of engineered cementitious composites - (2014) Materials and structures: Springer Netherlands, 47, pp. 667-682
  - INFLUENCE OF UNIT STRENGTH ON DEFORMATION BEHAVIOUR OF FIRED-CLAY BRICKWORK - CHEMICAL AND MINERALOGICAL STUDIES OF CONCRETE 1 BASED-WASTE MATERIALS FROM DEMOLITION SITES, pp. 56
  - Influence ofSiO2,Al2O3,CaO,andNa2Oon the elevated temperature performance of alkali-activated treated palm oil fuel ash-based mortar - (2020) STRUCTURAL CONCRETE: ERNST & SOHN
  - Interfacial behavior between normal substrate and green ultra‐high‐performance fiber‐reinforced concrete under elevated temperatures - (2019) Structural concrete: WILEY‐VCH Verlag GmbH & Co. KGaA, 20 (6), pp. 1896-1908
  - Interfacial interaction study of EDTA with the defect structure of Fe 3− δ O 4 passive film in an aggressive alkaline medium based on the lattice theory of point defects - (2022) RSC advances: Royal Society of Chemistry, 12 (6), pp. 3524-3541
  - Interfacial interaction study of EDTA with the defect structure of Fe₃₋ δO₄ passive film in an aggressive alkaline medium based on the lattice theory of point defects - (2022)
  - Investigation on Strength Enhancement T of U-TPOFA Based Binary Blended kkS Alkali Activated Mortar Through Addition of Fly Ash - (2020) Proceedings of AICCE 19, Lecture Notes in Civil Engineering, 53, pp. 1129-1137
  - Journal of the mechanical behavior of materials: Mechanical properties and microstructure of roller compacted concrete incorporating brick powder, glass powder, and steel slag - (2024) Journal of the mechanical behavior of materials: de Gruyter, 33
  - Kajian penggunaan MK7003 yang dihasilkan dari Kaolin tempatan sebagai bahan gantian separa terhadap ketahanlasakkan konkrit - (2006) Universiti Teknologi MARA
  - Kajian penghasilan simen campuran berbilang mineral dari sumber tempatan untuk digunakan dalam bancuhan konkrit - (2007) Institute of Research, Development and Commercialization, Universiti Teknologi MARA
  - Kajian potensi penggunaan MK7003 yang dihasilkan dari kaolin tempatan sebagai bahan gantian separa terhadap sifat-sifat fizikal dan mekanikal konkrit - (2004) Institute of Research, Development and Commercialization, Universiti Teknologi MARA
  - Landfill leachate treatment using combination of hydrophobic–hydrophilic and low cost adsorption materials as a single media - (2006) Proceeding of 1st Civil Engineering Colloquium (CEC'06), School of Civil Engineering, USM. Nibong Tebal, Penang, Malaysia
  - Long-term deformations of high-strength concrete containing silica fume and metakaolin - (2001) Special Publication, 200, pp. 97-112
  - MA; Zeyad, AM; Muhamad Bunnori, N.; Ariffin, KS Engineering and transport properties of high-strength green concrete containing high volume of ultrafine palm oil fuel ash - (2012) Constr. Build. Mater, 30, pp. 281-8
  - Magnesium sulfate resistance of alkali/slag activated silico-manganese fume-based composites - (2020) Construction and Building Materials: Elsevier, 265, pp. 120851
  - Mechanical and permeability properties of the interface between normal concrete substrate and ultra high performance fiber concrete overlay - (2012) Construction and building materials: Elsevier, 36, pp. 538-548
  - Mechanical Behaviour of Normal Concrete using Fibre of Pine Tree Needle Leaves - (2021) Int J. Eng. Adv. Technol, 10, pp. 99-102
  - Mechanical properties and bond characteristics of different fiber reinforced polymer rebars at elevated temperatures - (2017) Construction and building materials: Elsevier, 142, pp. 521-535
  - Mechanical properties and microstructure of roller compacted concrete incorporating brick powder, glass powder, and steel slag - (2024) Journal of the Mechanical Behavior of Materials: De Gruyter, 33 (1), pp. 20220307
  - Mechanical properties of engineered cementitious composite with palm oil fuel ash as a supplementary binder - (2013) Advanced Materials Research: Trans Tech Publications Ltd, 626, pp. 121-125
  - Mechanical properties of old concrete-UHPFC interface - (2012) International Conference on Concrete Repair, Rehabilitation and Retrofitting, 3, pp. 02-05
  - Metakaolin: penghasilan dan kesan penggunaannya sebagai bahan gantian separa terhadap sifat-sifat konkrit - (2004) Institute of Research, Development and Commercialization, Universiti Teknologi MARA
  - Micro-ball and micro-bottle resonators for relative humidity sensing - (2019) Optoelectronics and Advanced Materials, Rapid Communications: National Institute of Optoelectronics, 13 (11-12), pp. 567-571
  - Microbottle resonator formaldehyde sensor - (2019) Journal of Physics: Conference Series: IOP Publishing, 1151 (1), pp. 012021
  - Microbottle-resonator ethanol liquid sensor - (2020) IOP Conference Series: Materials Science and Engineering: IOP Publishing, 854 (1), pp. 012075
  - Microstructural analysis of the adhesion mechanism between old concrete substrate and UHPFC - (2014) Journal of Adhesion Science and Technology: Taylor & Francis, 28 (18), pp. 1846-1864
  - Modelling the early strength of alkali-activated cement composites containing palm oil fuel ash - (2019) Proceedings of the Institution of Civil Engineers-Construction Materials: Thomas Telford Ltd, 172 (3), pp. 133-143
  - Modern Civil Engineering in Trend of the Sustainable Infrastructure Development - (2015) Trans Tech Publications Ltd, pp. 1-722
  - New anchorage system of bars to improve the mechanical performance of post-heated FRP-reinforced concrete beams - (2019) Construction and Building Materials: Elsevier, 229, pp. 117090
  - On cardinality of character sums with Beatty sequences associated with Fibonacci numbers - (2022) American Institute of Physics Conference Series, 2465 (1), pp. 020005
  - On the cardinality of twelfth degree polynomial - (2016) AIP Conference Proceedings: AIP Publishing, 1739 (1)
  - On the Diophantine Equation - (2020) Menemui Matematik (Discovering Mathematics), 42 (2), pp. 67-75
  - On the Diophantine Equation x^ 2+ 5^ a 47^ b= y^ n - (2023) Menemui Matematik (Discovering Mathematics), 45 (1), pp. 104-111
  - On the Diophantine Equation - (2019) Malaysian Journal of Mathematical Sciences, 13, pp. 41–50
  - Optical characterization of microfiber loop resonator towards humidity sensing - (2019) Journal of Physics: Conference Series: IOP Publishing, 1151 (1), pp. 012006
  - Optimization of colloidal nano-silica based cementitious mortar composites using RSM and ANN approaches - (2023) Results in Engineering: Elsevier, 20, pp. 101390
  - Optimization of HCO3- Production Reflect to CaСo3 Precipitation for Self-Healing by Bacillus sphaericus - (2015) Applied Mechanics and Materials: Trans Tech Publications Ltd, 802, pp. 549-554
  - Optimizing strength behavior of sustainable ultra high performance green concrete with minimum cement content using response surface method - (2024) Journal of Building Pathology and Rehabilitation: Springer International Publishing, 9 (2), pp. 110
  - Optimizing Sustainable High Performance Green Concrete Characteristics with Minimum Cement Content Using Response Surface Methodology - (2023) Research Square, pp. 1-35
  - Performance of different grades of palm oil fuel ash with ground slag as base materials in the synthesis of alkaline activated mortar - (2014) Journal of Advanced Concrete Technology: Japan Concrete Institute, 12 (10), pp. 378-387
  - Performance of green high-strength concrete incorporating palm oil fuel ash in harsh environments - (2023) Materials Science-Poland, 41 (4), pp. 24-40
  - Performance of high strength concrete containing locust bean pod ash as cement replacement - (2024)
  - Performance of POFA-Based Alkali-Activated Mortar Exposed to Elevated Temperatures - (2018) International Journal of Current Science, Engineering & Technology, 1 (1), pp. 147-153
  - Performance of Polypropylene Fiber Reinforced GGBFS-based Alkali Activated Composite under Elevated Temperatures - (2023) Journal of Advanced Concrete Technology: Japan Concrete Institute, 21 (7), pp. 523-535
  - Phenomena of Bacillus sphaericus LMG 22257 Activity and Its Influence on Properties of Portland Cement Mortar Exposed to Different Curing Media - (2022) Separations: MDPI, 10 (1), pp. 19
  - Physicomechanical assessments and heavy metals’ leaching potential of modified asphalt binders incorporating crumb rubber and tin slag powders - (2021) Advances in Materials Science and Engineering: Hindawi, 2021 (1), pp. 2137957
  - PMMA microball resonator for formaldehyde liquid sensing - (2019) Journal of Physics: Conference Series: IOP Publishing, 1371 (1), pp. 012012
  - POFA-engineered alkali-activated cementitious composite performance in acid environment - (2017) Journal of Advanced Concrete Technology: Japan Concrete Institute, 15 (11), pp. 684-699
  - Pozzolanic characteristics of palm oil waste ash (POWA) and treated palm oil fuel ash (TPOFA) - (2012) Advances in Civil Engineering and Building Materials: CRC Press, pp. 145-149
  - Preparing of CaCO3 Nano-Particles by Mechano-Chemical Method - (2012) Advanced Materials Research: Trans Tech Publications Ltd, 445, pp. 833-838
  - Proceedings of The International Conference of Global Network for Innovative Technology and AWAM International Conference in Civil Engineering - (2017) AIP Conference Proceedings: AIP Publishing 1892, 010001
  - Properties of concrete block containing rice husk ash subjected to GIRHA - (2011) Int. J. Res. Rev. Appl. Sci, 8 (1), pp. 57-64
  - Properties of concrete containing rice husk ash under sodium chloride subjected to wetting and drying - (2012) Procedia Engineering, 50, pp. 305-313
  - Properties of ternary blended cement containing metakaolin and fly ash - (2008) Scientific Research Journal: Research Management Institute (RMI), 5 (1), pp. 13-26
  - Relation between sums of squares and sums of centred pentagonal numbers induced by partitions of 8 - (2021) Malaysian J Math Sci, 15 (1), pp. 21-31
  - Relationships between compressive strength and transport properties of ultrahigh-strength green concrete utilizing ternary-blended binder - (2020) Journal of Materials in Civil Engineering: American Society of Civil Engineers, 32 (3), pp. 04020011
  - Removal of ammoniacal nitrogen and COD from semi-aerobic landfill leachate using low-cost activated carbon? zeolite composite adsorbent - (2009) International journal of environment and waste management: Inderscience Publishers, 4 (3-4), pp. 399-411
  - Research Article Physicomechanical Assessments and Heavy Metals’ Leaching Potential of Modified Asphalt Binders Incorporating Crumb Rubber and Tin Slag Powders - (2021) Advances in Materials Science and Engineering: Hindawi, 2021, pp. 10
  - Retrofitting of damaged reinforced concrete beams with a new green cementitious composites material - (2016) Composite structures: Elsevier, 142, pp. 27-34
  - Rice husk ash and sewage sludge ash as sustainable replacement material for concrete - (2019) Journal of Physics: Conference Series: IOP Publishing, 1349 (1), pp. 012092
  - Sago pith waste ash as a new alternative raw materials from agricultural waste - (2016) Materials Science Forum: Trans Tech Publications Ltd, 840, pp. 389-393
  - Sago pith waste ash as a potential raw material for ceramic and geopolymer fabrication - (2018) Journal of Material Cycles and Waste Management: Springer Japan, 20, pp. 1090-1098
  - Sago Pith Waste Ash as an Addition to Fly Ash-Based Geopolymer Mortar - (2017) Materials Science Forum: Trans Tech Publications Ltd, 888, pp. 462-465
  - Seepage through homogenous and non-homogenous earth dams: Comparison between observation and simulation - (2006) Electronic Journal of Geotechnical Engineering, 11
  - Semi-aerobic landfill leachate treatment using carbon–minerals composite adsorbent - (2012) Environmental Engineering Science: Mary Ann Liebert, Inc., 29 (5), pp. 306-312
  - Shrinkage and strength of alkaline activated ground steel slag/ultrafine palm oil fuel ash pastes and mortars - (2014) Materials & Design: Elsevier, 63, pp. 710-718
  - Shrinkage characteristics of green engineered cementitious composites with varying palm oil fuel ash contents and water-binder ratios - (2013) Advanced Materials Research: Trans Tech Publications Ltd, 626, pp. 245-249
  - Silicomanganese fume-based alkali-activated mortar: experimental, statistical, and environmental impact studies - (2024) Environmental Science and Pollution Research: Springer Berlin Heidelberg, pp. 1-16
  - Simultaneous Pell equations - (2016) AIP Conference Proceedings: AIP Publishing, 1750 (1)
  - Simultaneous Pell Equations x²-my²= 1 and y²-pz²= 1. - (2017) Malaysian Journal of Mathematical Sciences, 11
  - Simultaneous Pell Equations - (2017) Malaysian Journal of Mathematical Sciences, 11, pp. 61–71
  - Smart irrigation using fuzzy logic method - (2018) ARPN Journal of Engineering and Applied Sciences, 13 (2), pp. 517-522
  - Sodium sulfate resistance of alkali/slag activated silico–manganese fume‐based composites - (2021) Structural Concrete: WILEY‐VCH Verlag GmbH & Co. KGaA, 22, pp. E415-E429
  - Strength activity index and microstructural characteristics of treated palm oil fuel ash - (2011) structure, 5 (5), pp. 6
  - Strength and Microstructural Performance of Nano-SiO2 Gel (NSG) Infused Alkaline Activated Ground Blast Furnace Slag-Ultrafine Palm Oil Fuel Ash (AAGU) Based Mortar - (2014) Advanced Materials Research: Trans Tech Publications Ltd, 856, pp. 280-284
  - Strength and microstructure analysis of concrete containing rice husk ash under seawater attack by wetting and drying cycles - (2014) Advances in cement research: Thomas Telford Ltd, 26 (3), pp. 145-154
  - Strength and microstructure of alkali-activated binary blended binder containing palm oil fuel ash and ground blast-furnace slag - (2014) Construction and Building Materials: Elsevier, 52, pp. 504-510
  - Strength and permeability properties of concrete containing rice husk ash with different grinding time - (2011) Open Engineering: Versita, 1 (1), pp. 103-112
  - Strength of binary and ternary blended cement pastes containing palm oil fuel ash and metakaolin exposed to sodium sulphate - (2017) MATEC Web of Conferences: EDP Sciences, 103, pp. 01001
  - Sulfuric acid resistance of alkali/slag activated silico‐manganese fume‐based mortars - (2021) Structural Concrete: WILEY‐VCH Verlag GmbH & Co. KGaA, 22, pp. E400-E414
  - Sustainable and Advanced Construction Materials - (2017) MATEC Web of Conferences: EDP Sciences, 103
  - Synthesis of alkali-activated binary blended silico-manganese fume and ground blast furnace slag mortar - (2019) Journal of Advanced Concrete Technology: Japan Concrete Institute, 17 (12), pp. 728-735
  - Synthesis of geopolymer from large amounts of treated palm oil fuel ash: Application of the Taguchi method in investigating the main parameters affecting compressive strength - (2014) Construction and Building Materials: Elsevier, 52, pp. 473-481
  - Synthesis of low temperature cured alkaline activated silicomanganese fume mortar - (2019) Construction and Building Materials: Elsevier, 200, pp. 387-397
  - Synthesis of volcanic ash-based geopolymer mortar designed by the Taguchi method - (2022) Civil Engineering Journal, 8 (11), pp. 2585-2597
  - The Compressive Strength and Microstructure of Alkali-Activated Mortars Utilizing By-Product-Based Binary-Blended Precursors - (2023) Applied Mechanics: MDPI, 4 (3), pp. 885-898
  - The effect of carboxylate compounds on controlling nitrite’s environmental side effects for carbon steel corrosion protection in the simulated concrete pore solution - (2021) Construction and Building Materials: Elsevier, 308, pp. 125037
  - The Effect of Honeycomb Core Thickness on the Repeated Low-Velocity Impact Behavior of Sandwich Beams - (2020) Athens Journal of Technology and Engineering , 7 (4), pp. 239-256
  - The effect of Na2SO4 and NaCl solutions on the moisture movement of fired clay masonry wall - (2011) Int J Sustain Constr Eng Technol, 2 (1)
  - The effect of steam curing regimes on the chloride resistance and pore size of high–strength green concrete - (2021) Construction and Building Materials: Elsevier, 280, pp. 122409
  - The effect of various grades of Na2SiO3 on the compressive strength (CS) development of alkaline activated binder mortar (AABM) - (2019) Proceedings of AICCE'19: Transforming the Nation for a Sustainable Tomorrow: Springer Nature, 53, pp. 453
  - The engineering properties and pozzolanic reaction kinetics of quaternary blended binder high strength mortars optimized by the Taguchi method - (2022) Journal of Building Engineering: Elsevier, 54, pp. 104582
  - The influence of palm oil fuel ash heat treatment on the strength activity, porosity, and water absorption of cement mortar - "(2022) Environmental Science and Pollution Research: Springer Berlin Heidelberg, 29 (48), pp. 72493-72514"
  - The influence of palm oil fuel ash on the fresh properties of green self-compacting concrete - (2020) IOP Conference Series: Materials Science and Engineering: IOP Publishing, 849 (1), pp. 012066
  - The parameterization of nice and Q-nice polynomials with four roots - (2018) Journal of Physics: Conference Series: IOP Publishing, 1132 (1), pp. 012002
  - The relationship between substrate roughness parameters and bond strength of ultra high-performance fiber concrete - (2013) Journal of Adhesion Science and Technology: Routledge, 27 (16), pp. 1790-1810
  - The Role of Silica Fume in Enhancing the Strength and Transport Properties of PET Fiber–Ultra High-Performance Concrete - (2024) Advances in Civil Engineering Materials: ASTM International, 13 (1), pp. 95-115
  - The role of silica fume in the adhesion of concrete restoration systems - (2013) Advanced Materials Research: Trans Tech Publications Ltd, 626, pp. 265-269
  - Thermal analysis and pozzolanic index of rice husk ash at different grinding time - (2012) Procedia Engineering, 50, pp. 101-109
  - Transport properties of palm oil fuel ash-based high-performance green concrete subjected to steam curing regimes - (2022) Case Studies in Construction Materials: Elsevier, 16, pp. e01077
  - Ultrafine palm oil fuel ash: from an agro-industry by-product into a highly efficient mineral admixture for high strength green concrete - (2017) J Eng Appl Sci, 12 (7), pp. 35
  - Utilisation of Response Surface Methodology (RSM) in Optimizing High-Strength Concrete Containing Microfine MetakaolinBy - (2024) Research Square, pp. 1-22
  - Workability, setting time and strength of high-strength concrete containing high volume of palm oil fuel ash - (2018) The Open Civil Engineering Journal, 12 (1)
- Book Chapter
  - Effect of Incorporating Supplementary Cementitious Materials on Properties of High-Performance Fine-Grained Cement Mortar - (2022) AWAM International Conference on Civil Engineering: Springer Nature Singapore, pp. 503-514
  - Impact of Metakaolin, Micro-silica, and Colloidal Nano-silica on mechanical and Microstructural properties of Cement Mortar - (2023) Advances in Civil Engineering Materials: Selected Articles from the 6th International Conference on Architecture and Civil Engineering (ICACE 2022), August 2022, Kuala Lumpur, Malaysia: Springer Nature Singapore, pp. 443-451
  - Mechanical and Leaching Properties of Solidified Clinical Waste Incinerator Fly Ash Mortar - (2022) AWAM International Conference on Civil Engineering: Springer Nature Singapore, pp. 531-545
  - Steel-slag and activators ratio impacts on the shrinkage of alkaline activated ultrafine palm oil ash-steel slag paste/mortar - (2014) Construction Materials and Structures: IOS Press, pp. 511-517
- Conference Paper
  - Analysis of the AE signals parameter at the critical area on the concrete beam - (2012) 2012 IEEE Symposium on Industrial Electronics and Applications: IEEE, pp. 386-391
  - Compressive strength and microstructural characteristics of binary blended cement mortar containing palm oil fuel ash - (2020) Proceedings of AICCE'19: Transforming the Nation for a Sustainable Tomorrow 4: Springer International Publishing, pp. 1513-1522
  - Constitutive models for predicting mechanical properties of natural pozzolan-based alkali activated concrete - (2019) 10th International Structural Engineering and Construction Conference, ISEC 2019: ISEC Press
  - Development of Sustainable Cementitious Binder Utilizing Silicomanganese Fumes - (2020) Intelligent Manufacturing and Energy Sustainability: Proceedings of ICIMES 2019; Springer Singapore, pp. 299-308
  - Effect of incorporating nano-silica on the strength of natural pozzolan-based alkali-activated concrete - (2018) International Congress on Polymers in Concrete (ICPIC 2018) Polymers for Resilient and Sustainable Concrete Infrastructure 16: Springer International Publishing, pp. 703-709
  - Effect of Various Grades of Na2SiO3 on Compressive Strength Development of Eggshells Powder-Based Alkaline Activated Mortar - (2020) Proceedings of AICCE'19: Transforming the Nation for a Sustainable Tomorrow 4: Springer International Publishing, pp. 453-461
  - Entity-Relationship analysis for development of Malaysian University Research Assessment Instrument (MyRA) information system - (2011) 2011 IEEE International Conference on System Engineering and Technology: IEEE, pp. 219-224
  - Investigation of MFCC feature representation for classification of spoken letters using Multi-Layer Perceptrons (MLP) - (2011) 2011 IEEE International Conference on Computer Applications and Industrial Electronics (ICCAIE): IEEE, pp. 16-20
  - Investigation on Strength Enhancement of U-TPOFA Based Binary Blended Alkali Activated Mortar Through Addition of Fly Ash - (2020) Proceedings of AICCE'19: Transforming the Nation for a Sustainable Tomorrow 4: Springer International Publishing, pp. 1129-1137
- Memorandum
  - Alkali-activated concrete containing palm oil fuel ash - (2021) United States Patent: US, 11174202
  - Aluminum hydroxide enhanced mortar composition - (2023) United States Patent: US, 11685691
  - Ash-containing concrete composition - (2023) United States Patent: US, 11572310
  - Ash-containing concrete composition ii - (2023) United States Patent: US, 11618715
  - Concrete composition containing palm oil fuel ash - (2023) United States Patent: US, 11572311
  - Curable concrete composition containing palm ash - (2023) United States Patent: US, 11613499
  - Green concrete kit composed of four components - (2024) United States Patent: US, 11993544
  - High-performance green concrete kit with four components - (2024) United States Patent: US, 11987527
  - Method of making an ash-based mortar composition - (2022) United States Patent: US, 11492293
  - Mortar composition containing iron oxide - (2023) United States Patent: US, 11691916
  - Natural material-based ash mortar composition - (2023) United States Patent: US, 11577996
  - Palm ash curable concrete composition - (2023) United States Patent: US, 11548823
  - Palm oil fuel ash based mortar compositions - (2021) United States Patent: US, 11168027
  - Room temperature cured green concrete derived from natural pozzolan and nanosilica - (2022) United States Patent: US, 11414353
  - Tinted mortar composition containing fuel ash - (2023) United States Patent: US, 11667571
  - Two component green concrete kit - (2023) United States Patent: US, 11685693
- Review
  - A review: Durability of fired clay brick masonry wall due to salt attack - (2009) International Journal of Integrated Engineering, 1 (2)
  - An overview and experimental study on hybrid binders containing date palm ash, fly ash, OPC and activator composites - (2018) Construction and Building Materials: Elsevier, 159, pp. 567-577
  - An overview of characterisation, utilisation, and leachate analysis of clinical waste incineration ash - (2022) International Journal of Environmental Research: Springer International Publishing, 16 (5), pp. 69
  - Assessment of important parameters involved in the synthesis of geopolymer composites: A review - (2020) Construction and Building Materials: Elsevier, 264, pp. 120276
  - Cementitious grout for preplaced aggregate concrete: A review - (2017) AIP Conference Proceedings: AIP Publishing, 1892 (1)
  - Coal bottom ash as constituent binder and aggregate replacement in cementitious and geopolymer composites: A review - (2022) Journal of Building Engineering: Elsevier, 52, pp. 104369
  - Effects of using blended binder of RHA and GGBS on the properties of concrete: A review - (2017) AIP Conference Proceedings: AIP Publishing, 1892 (1)
  - Impact of fiber reinforcements on properties of geopolymer composites: A review - (2021) Journal of Building Engineering: Elsevier, 44, pp. 102628
  - Pozzolanic reactivity of ultrafine palm oil fuel ash waste on strength and durability performances of high strength concrete - (2017) Journal of Cleaner Production: Elsevier, 144, pp. 511-522
  - Properties of Concrete and Mortar Containing Locust Bean Pod Ash as Cement Replacement: A Review - (2023) Civil Engineering and Architecture: hrpub, 11(6), pp. 3479-3487
  - The influence of palm oil fuel ash and metakaolin on the strength of concrete and crack resistance of reinforced concrete beam: A review - (2023) World Journal of Engineering: Emerald Publishing Limited, 20 (5), pp. 989-1000
  - Utilization of ultra-high performance fibre concrete (UHPFC) for rehabilitation–a review - (2013) Procedia Engineering: Elsevier, 54, pp. 525-538
Scopus
- Article
  - A sustainable enhancement of bio-cement using immobilised Bacillus sphaericus: Optimization, microstructural properties, and techno-economic analysis for a cleaner production of bio-cementitious mortars - (2021) Journal of Cleaner Production: Elsevier Ltd, 318, 128470
  - Ammoniacal nitrogen and COD removal from semi-aerobic landfill leachate using a composite adsorbent: Fixed bed column adsorption performance - (2010) Journal of Hazardous Materials, 175(1-3), pp. 960–964
  - An overview and experimental study on hybrid binders containing date palm ash, fly ash, OPC and activator composites - (2018) Construction and Building Materials: Elsevier Ltd, 159, pp. 567–577
  - Application of response surface methodology for optimizing the compressive strength of green ultra high strength concrete using silica fume - (2024) Journal of Building Pathology and Rehabilitation: Springer Nature, 9(1), 5
  - Assessment of corroded reinforced concrete beams: Cyclic load test and acoustic emission techniques - (2020) Construction and Building Materials: Elsevier Ltd, 233, 117291
  - Bond strength of the interface between normal concrete substrate and GUSMRC repair material overlay - (2019) Construction and Building Materials: Elsevier Ltd, 216, pp. 261–271
  - Characterization of the interfacial bond between old concrete substrate and ultra high performance fiber concrete repair composite - (2013) Materials and Structures/Materiaux et Constructions, 46(5), pp. 743–753
  - Chloride diffusion and chloride-induced corrosion of steel embedded in natural pozzolan-based alkali activated concrete - (2020) Construction and Building Materials: Elsevier Ltd, 262, 120669
  - Comparative study on chemical composition of coal ash amongs Malaysian coal-fired power plants - (2015) Malaysian Construction Research Journal: Construction Research Institute of Malaysia, 17(1), pp. 69–77
  - Comparison study of ammonia and COD adsorption on zeolite, activated carbon and composite materials in landfill leachate treatment - (2010) Desalination: Elsevier B.V., 262(1-3), pp. 31–35
  - Compressive strength of treated palm oil fuel ash based geopolymer mortar containing calcium hydroxide, aluminum hydroxide and silica fume as mineral additives - (2015) Cement and Concrete Composites: Elsevier Ltd, 60, pp. 65–81
  - Corrigendum to “Development and evaluation of basaltic volcanic ash based high performance concrete incorporating metakaolin, micro and nano-silica” - (2024) Developments in the Built Environment: Elsevier Ltd, 17, 100373
  - Damage assessment of reinforced concrete beams at different flexural damage levels using acoustic emission technique - (2012) Malaysian Construction Research Journal, 11(2), pp. 79–90
  - Damage evaluation of reinforced concrete beams with varying thickness using the acoustic emission technique - (2013) Construction and Building Materials: Elsevier Ltd, 44, pp. 812–821
  - Development and evaluation of basaltic volcanic ash based high performance concrete incorporating metakaolin, micro and nano-silica - (2024) Developments in the Built Environment: Elsevier Ltd, 17, 100330
  - Development of engineering and transport properties of green high strength concrete utilizing ternary blended binders - (2021) European Journal of Environmental and Civil Engineering: Taylor and Francis Ltd., 25(7), pp. 1251–1267
  - Development of green ultra-high performance fiber reinforced concrete containing ultrafine palm oil fuel ash - (2013) Construction and Building Materials, 48, pp. 379–389
  - Durability performance of Palm Oil Fuel Ash-based Engineered Alkaline-activated Cementitious Composite (POFA-EACC) mortar in sulfate environment - (2017) Construction and Building Materials: Elsevier Ltd, 131, pp. 229–244
  - Effect of admixtures on the setting times of high-strength concrete - (2000) Cement and Concrete Composites, 22(4), pp. 293–301
  - Effect of alkaline activator ratio on the compressive strength response of POFA-EACC mortar subjected to elevated temperature - (2021) Materials at High Temperatures: Taylor and Francis Ltd., 38(3), pp. 166–176
  - Effect of alkaline activators and binder content on the properties of natural pozzolan-based alkali activated concrete - (2017) Construction and Building Materials: Elsevier Ltd, 147, pp. 648–660
  - Effect of alkaline activators on the fresh properties and strength of silico-manganese fume-slag activated mortar - (2020) Advances in Concrete Construction: Techno-Press, 10(5), pp. 403–416
  - Effect of delay time and Na2SiO3 concentrations on compressive strength development of geopolymer mortar synthesized from TPOFA - (2015) Construction and Building Materials: Elsevier Ltd, 86, pp. 64–74
  - Effect of fineness of palm oil fuel ash on compressive strength and microstructure of alkaline activated mortar - (2019) European Journal of Environmental and Civil Engineering: Taylor and Francis Ltd., 23(2), pp. 136–152
  - Effect of metakaolin on creep and shrinkage of concrete - (2001) Cement and Concrete Composites, 23(6), pp. 495–502
  - Effect of rice husk ash fineness on the chemical and physical properties of concrete - (2011) Magazine of Concrete Research, 63(5), pp. 313–320
  - Effect of the incorporation of PET fiber and ternary blended binder on the flexural and tensile behaviour of ultra-high performance green concrete - (2022) Construction and Building Materials: Elsevier Ltd, 331, 127306
  - Effects of addition of Al(OH)3 on the strength of alkaline activated ground blast furnace slag-ultrafine palm oil fuel ash (AAGU) based binder - (2014) Construction and Building Materials, 50, pp. 361–367
  - Effects of bars slippage on the pre-and post-heating flexural behavior of FRP reinforced concrete beams: Experimental and theoretical investigations - (2019) International Journal of Civil Engineering and Technology: IAEME Publication, 10(2), pp. 574–602
  - Effects of H2O/Na2O molar ratio on the strength of alkaline activated ground blast furnace slag-ultrafine palm oil fuel ash based concrete - (2014) Materials and Design: Elsevier Ltd, 56, pp. 158–164
  - Efficiency of high performance fiber reinforced cementitious composites as a retrofit material for fire-damaged concrete - (2022) Materials Today: Proceedings; Elsevier Ltd, 61, pp. 477–486
  - Efficiency of treated and untreated palm oil fuel ash as a supplementary binder on engineering and fluid transport properties of high-strength concrete - (2016) Construction and Building Materials: Elsevier Ltd, 125, pp. 1066–1079
  - Engineering and transport properties of high-strength green concrete containing high volume of ultrafine palm oil fuel ash - (2012) Construction and Building Materials, 30, pp. 281–288
  - Engineering properties of normal concrete grade 40 containing Rice husk ash at different grinding times - (2011) International Journal of Technology: Faculty of Engineering, Universitas Indonesia, 2(1), pp. 10–19
  - Enhancing the engineering properties and microstructure of room temperature cured alkali activated natural pozzolan based concrete utilizing nanosilica - (2018) Construction and Building Materials: Elsevier Ltd, 189, pp. 352–365
  - Enhancing the properties of UPOFA-based geopolymer mortar via the incorporation of eggshell ash and silica fume - (2023) Journal of Building Engineering: Elsevier Ltd, 65, 105677
  - Evaluation of properties of steel fiber reinforced GGBFS-based geopolymer composites in aggressive environments - (2022) Construction and Building Materials: Elsevier Ltd, 345, 128339
  - Evaluation of slag-blended alkaline-activated palm oil fuel ash mortar exposed to the sulfuric acid environment - (2015) Journal of Materials in Civil Engineering: American Society of Civil Engineers (ASCE), 27(12), 04015058
  - Evaluation of the mechanical properties, microstructure, and environmental impact of mortar incorporating metakaolin, micro and nano-silica - (2024) Case Studies in Construction Materials: Elsevier Ltd, 20, e02699
  - Evaluation of ultra-high-performance-fiber reinforced concrete binder content using the response surface method - (2013) Materials and Design: Elsevier Ltd, 52, pp. 957–965
  - Evolution of alkaline activated ground blast furnace slag-ultrafine palm oil fuel ash based concrete - (2014) Materials and Design: Elsevier Ltd, 55, pp. 387–393
  - Evolution of room-cured alkali-activated silicomanganese fume-based green mortar designed using Taguchi method - (2021) Construction and Building Materials: Elsevier Ltd, 307, 124970
  - Existing concrete textures: Their effect on adhesion with fibre concrete overlay - (2014) Proceedings of the Institution of Civil Engineers: Structures and Buildings; ICE Publishing Ltd, 167(6), pp. 355–368
  - Experimental Assessment of Rebar Corrosion in Concrete Slab Using Ground Penetrating Radar (GPR) - (2018) International Journal of Corrosion: Hindawi Limited, 2018, 5389829
  - Experimental Investigation on the Effectiveness of Truss-Shaped Punching Shear Reinforcement in Flat Slab - (2022) Journal of Engineering and Technological Sciences: Institute for Research and Community Services, Institut Teknologi Bandung, 54(4), 220402
  - Flexural performance of green engineered cementitious composites containing high volume of palm oil fuel ash - (2012) Construction and Building Materials, 37, pp. 518–525
  - Fluid transport properties of normal concrete substrate and a new green fiber reinforced concrete overlay composite - (2019) Structural Concrete: Wiley-Blackwell, 20(5), pp. 1771–1780
  - Fracture and tensile characteristics of engineered cementitious composites containing POFA - (2013) Advances in Cement Research, 25(4), pp. 189–199
  - Impact of added water and superplasticizer on early compressive strength of selected mixtures of palm oil fuel ash-based engineered geopolymer composites - (2016) Construction and Building Materials: Elsevier Ltd, 109, pp. 198–206
  - Impact of Al(OH)3 addition to POFA on the compressive strength of POFA alkali-activated mortar - (2018) Construction and Building Materials: Elsevier Ltd, 190, pp. 65–82
  - Impact of Slag Content and Curing Methods on the Strength of Alkaline-Activated Silico-Manganese Fume/Blast Furnace Slag Mortars - (2019) Arabian Journal for Science and Engineering: Springer Verlag, 44(10), pp. 8325–8335
  - Impacts of silica modulus on the early strength of alkaline activated ground slag/ultrafine palm oil fuel ash based concrete - (2015) Materials and Structures/Materiaux et Constructions: Kluwer Academic Publishers, 48(3), pp. 733–741
  - Improving Damaged Reinforced Concrete Beam Failure Behavior Using Externally Bonded UHPFRCCs System - (2023) International Journal of Civil Engineering: Springer Science and Business Media Deutschland GmbH, 21(1), pp. 67–79
  - Improving the engineering and fluid transport properties of ultra-high strength concrete utilizing ultrafine palm oil fuel ash - (2014) Journal of Advanced Concrete Technology: Japan Concrete Institute, 12(4), pp. 127–137
  - Influence of calcination temperature on characteristics and pozzolanic activity of palm oil waste ash - (2011) Australian Journal of Basic and Applied Sciences, 5(11), pp. 1010–1018
  - Influence of coal bottom ash on properties of Portland cement mortar - (2019) International Journal of Integrated Engineering: Penerbit UTHM, 11(2), pp. 069–077
  - Influence of composition and concentration of alkaline activator on the properties of natural-pozzolan based green concrete - (2019) Construction and Building Materials: Elsevier Ltd, 201, pp. 186–195
  - Influence of curing methods and concentration of NaOH on strength of the synthesized alkaline activated ground slag-ultrafine palm oil fuel ash mortar/concrete - (2014) Construction and Building Materials: Elsevier Ltd, 66, pp. 541–548
  - Influence of heat curing period and temperature on the strength of silico-manganese fume-blast furnace slag-based alkali-activated mortar - (2020) Construction and Building Materials: Elsevier Ltd, 251, 118961
  - Influence of milling process of palm oil fuel ash on the properties of palm oil fuel ash-based alkali activated mortar - (2022) Case Studies in Construction Materials: Elsevier Ltd, 16, e00857
  - Influence of nano-SiO2 on the strength and microstructure of natural pozzolan based alkali activated concrete - (2018) Construction and Building Materials: Elsevier Ltd, 173, pp. 573–585
  - Influence of palm oil fuel ash on behaviour of green highperformance fine-grained cement mortar - (2022) Advances in Materials Research (South Korea): Techno-Press, 11(2), pp. 121–146
  - Influence of palm oil fuel ash on properties of high-strength green concrete - (2019) Scientific Journal of King Faisal University: King Faisal University, 20(1), pp. 63–72
  - Influence of palm oil fuel ash on ultimate flexural and uniaxial tensile strength of green ultra-high performance fiber reinforced cementitious composites - (2014) Materials and Design: Elsevier Ltd, 54, pp. 694–701
  - Influence of pore structure on the properties of green concrete derived from natural pozzolan and nanosilica - (2020) Journal of Sustainable Cement-Based Materials: Taylor and Francis Ltd., 9(4), pp. 233–257
  - Influence of SiO2, Al2O3, CaO, and Na2O on the elevated temperature performance of alkali-activated treated palm oil fuel ash-based mortar - (2021) Structural Concrete: Wiley-Blackwell, 22(S1), pp. E380–E399
  - Influence of Steam Curing on the Performance of High-strength Concrete Incorporating Metakaolin - (2024) Periodica Polytechnica Civil Engineering: Budapest University of Technology and Economics, 68(4), pp. 1132–1148
  - Influence of steam curing regimes on the properties of ultrafine POFA-based high-strength green concrete - (2021) Journal of Building Engineering: Elsevier Ltd, 38, 102204
  - Influence of supplementary cementitious materials on engineering properties of high strength concrete - (2011) Construction and Building Materials, 25(5), pp. 2639–2648
  - Influence of treated palm oil fuel ash on compressive properties and chloride resistance of engineered cementitious composites - (2014) Materials and Structures/Materiaux et Constructions: Springer Science and Business Media Netherlands, 47(4), pp. 667–682
  - Interfacial behavior between normal substrate and green ultra-high-performance fiber-reinforced concrete under elevated temperatures - (2019) Structural Concrete: Wiley-Blackwell, 20(6), pp. 1896–1908
  - Magnesium sulfate resistance of alkali/slag activated silico-manganese fume-based composites - (2020) Construction and Building Materials: Elsevier Ltd, 265, 120851
  - Mechanical properties and bond characteristics of different fiber reinforced polymer rebars at elevated temperatures - (2017) Construction and Building Materials: Elsevier Ltd, 142, pp. 521–535
  - Mechanical properties and microstructure of roller compacted concrete incorporating brick powder, glass powder, and steel slag - (2024) Journal of the Mechanical Behavior of Materials: Walter de Gruyter GmbH, 33(1), 20220307
  - Microstructural analysis of the adhesion mechanism between old concrete substrate and UHPFC - (2014) Journal of Adhesion Science and Technology: Taylor and Francis Ltd., 28(18), pp. 1846–1864
  - Modelling the early strength of alkali-activated cement composites containing palm oil fuel ash - (2019) Proceedings of Institution of Civil Engineers: Construction Materials; ICE Publishing, 172(3), pp. 133–143
  - New anchorage system of bars to improve the mechanical performance of post-heated FRP-reinforced concrete beams - (2019) Construction and Building Materials: Elsevier Ltd, 229, 117090
  - Optimization of colloidal nano-silica based cementitious mortar composites using RSM and ANN approaches - (2023) Results in Engineering: Elsevier B.V., 20, 101390
  - Optimizing strength behavior of sustainable ultra high performance green concrete with minimum cement content using response surface method - (2024) Journal of Building Pathology and Rehabilitation: Springer Nature, 9(2), 110
  - Performance of different grades of palm oil fuel ash with ground slag as base materials in the synthesis of alkaline activated mortar - (2014) Journal of Advanced Concrete Technology: Japan Concrete Institute, 12(10), pp. 378–387
  - Performance of green high-strength concrete incorporating palm oil fuel ash in harsh environments - (2023) Materials Science- Poland: Sciendo, 41(4), pp. 24–40
  - Performance of high strength concrete containing locust bean pod ash as cement replacement - (2024) Research on Engineering Structures and Materials: MIM RESEARCH GROUP, 10(1), pp. 71–89
  - Performance of High Strength Concrete Containing Palm Oil Fuel Ash and Metakaolin as Cement Replacement Material - (2022) Advances in Civil Engineering: Hindawi Limited, 2022, 6454789
  - Performance of Polypropylene Fiber Reinforced GGBFS-based Alkali Activated Composite under Elevated Temperatures - (2023) Journal of Advanced Concrete Technology: Japan Concrete Institute, 21(7), pp. 523–535
  - Performance of polypropylene fiber reinforced GGBFS-based alkali activated composites under sulfate and freeze–thaw conditions - (2023) Materials and Structures/Materiaux et Constructions: Springer Science and Business Media B.V., 56(2), 44
  - Phenomena of Bacillus sphaericus LMG 22257 Activity and Its Influence on Properties of Portland Cement Mortar Exposed to Different Curing Media - (2023) Separations: MDPI, 10(1), 19
  - Physicomechanical Assessments and Heavy Metals' Leaching Potential of Modified Asphalt Binders Incorporating Crumb Rubber and Tin Slag Powders - (2021) Advances in Materials Science and Engineering: Hindawi Limited, 2021, 2137957
  - POFA-engineered alkali-activated cementitious composite performance in acid environment - (2017) Journal of Advanced Concrete Technology: Japan Concrete Institute, 15(11), pp. 684–699
  - Properties of Concrete and Mortar Containing Locust Bean Pod Ash as Cement Replacement: A Review - (2023) Civil Engineering and Architecture: Horizon Research Publishing, 11(6), pp. 3479–3487
  - Relationships between Compressive Strength and Transport Properties of Ultrahigh-Strength Green Concrete Utilizing Ternary-Blended Binder - (2020) Journal of Materials in Civil Engineering: American Society of Civil Engineers (ASCE), 32(3), 04020011
  - Removal of ammoniacal nitrogen and COD from semi-aerobic landfill leachate using low-cost activated carbon zeolite composite adsorbent - (2009) International Journal of Environment and Waste Management: Inderscience Publishers, 4(3-4), pp. 399–411
  - Retrofitting of damaged reinforced concrete beams with a new green cementitious composites material - (2016) Composite Structures: Elsevier Ltd, 142, pp. 27–34
  - Sago pith waste ash as a potential raw material for ceramic and geopolymer fabrication - (2018) Journal of Material Cycles and Waste Management: Springer Tokyo, 20(2), pp. 1090–1098
  - Shrinkage and strength of alkaline activated ground steel slag/ultrafine palm oil fuel ash pastes and mortars - (2014) Materials and Design: Elsevier Ltd, 63, pp. 710–718
  - Silicomanganese fume-based alkali-activated mortar: experimental, statistical, and environmental impact studies - (2024) Environmental Science and Pollution Research: Springer, 31(52), pp. 61525–61540
  - Sodium sulfate resistance of alkali/slag activated silico–manganese fume-based composites - (2021) Structural Concrete: Wiley-Blackwell, 22(S1), pp. E415–E429
  - Strength and microstructure analysis of concrete containing rice husk ash under seawater attack by wetting and drying cycles - (2014) Advances in Cement Research: Thomas Telford Services Ltd, 26(3), pp. 145–154
  - Strength and microstructure of alkali-activated binary blended binder containing palm oil fuel ash and ground blast-furnace slag - (2014) Construction and Building Materials, 52, pp. 504–510
  - Strength and permeability properties of concrete containing rice husk ash with different grinding time - (2011) Central European Journal of Engineering: Springer-Verlag Wien, 1(1), pp. 103–112
  - Sulfuric acid resistance of alkali/slag activated silico-manganese fume-based mortars - (2021) Structural Concrete: Wiley-Blackwell, 22(S1), pp. E400–E414
  - Synthesis of alkali-activated binary blended silico-manganese fume and ground blast furnace slag mortar - (2019) Journal of Advanced Concrete Technology: Japan Concrete Institute, 17(12), pp. 728–735
  - Synthesis of geopolymer from large amounts of treated palm oil fuel ash: Application of the Taguchi method in investigating the main parameters affecting compressive strength - (2014) Construction and Building Materials, 52, pp. 473–481
  - Synthesis of low temperature cured alkaline activated silicomanganese fume mortar - (2019) Construction and Building Materials: Elsevier Ltd, 200, pp. 387–397
  - Synthesis of Volcanic Ash-based Geopolymer Mortar Designed by the Taguchi Method - (2022) Civil Engineering Journal (Iran): Salehan Institute of Higher Education, 8(11), pp. 2585–2597
  - The Compressive Strength and Microstructure of Alkali-Activated Mortars Utilizing By-Product-Based Binary-Blended Precursors - (2023) Applied Mechanics: Multidisciplinary Digital Publishing Institute (MDPI), 4(3), pp. 885–898
  - The effect of steam curing regimes on the chloride resistance and pore size of high–strength green concrete - (2021) Construction and Building Materials: Elsevier Ltd, 280, 122409
  - The engineering properties and pozzolanic reaction kinetics of quaternary blended binder high strength mortars optimized by the Taguchi method - (2022) Journal of Building Engineering: Elsevier Ltd, 54, 104582
  - The influence of palm oil fuel ash heat treatment on the strength activity, porosity, and water absorption of cement mortar - (2022) Environmental Science and Pollution Research: Springer Science and Business Media Deutschland GmbH, 29(48), pp. 72493–72514
  - The relationship between substrate roughness parameters and bond strength of ultra high-performance fiber concrete - (2013) Journal of Adhesion Science and Technology, 27(16), pp. 1790–1810
  - The Role of Silica Fume in Enhancing the Strength and Transport Properties of PET Fiber–Ultra High-Performance Concrete - (2024) Advances in Civil Engineering Materials: ASTM International, 13(1), pp. 95–115
  - Transport properties of palm oil fuel ash-based high-performance green concrete subjected to steam curing regimes - (2022) Case Studies in Construction Materials: Elsevier Ltd, 16, e01077
  - Workability, setting time and strength of high-strength concrete containing high volume of palm oil fuel ash - (2018) Open Civil Engineering Journal: Bentham Science Publishers B.V., 12, pp. 25–46
- Book Chapter
  - Compressive Strength and Microstructural Characteristics of Binary Blended Cement Mortar Containing Palm Oil Fuel Ash - (2020) Lecture Notes in Civil Engineering: Springer, 53, pp. 1513–1522
  - Effect of Various Grades of Na2SiO3 on Compressive Strength Development of Eggshells Powder-Based Alkaline Activated Mortar - (2020) Lecture Notes in Civil Engineering: Springer, 53, pp. 453–461
  - Investigation on Strength Enhancement of U-TPOFA Based Binary Blended Alkali Activated Mortar Through Addition of Fly Ash - (2020) Lecture Notes in Civil Engineering: Springer, 53, pp. 1129–1137
  - Pozzolanic characteristics of palm oil waste ash (POWA) and treated palm oil fuel ash (TPOFA) - (2012) Advances in Civil Engineering and Building Materials: CRC Press, pp. 145–149
- Conference Paper
  - Analysis of the AE signals parameter at the critical area on the concrete beam - (2012) ISIEA 2012 - 2012 IEEE Symposium on Industrial Electronics and Applications, pp. 386–391, 6496666
  - Cementitious grout for preplaced aggregate concrete: A review - (2017) AIP Conference Proceedings: American Institute of Physics Inc., 1892, 020029
  - Characteristics of treated palm oil fuel ash and its effects on properties of high strength concrete - (2013) Advanced Materials Research, 626, pp. 152–156
  - Characterization of metakaolin treated at different calcination temperatures - (2017) AIP Conference Proceedings: American Institute of Physics Inc., 1892, 020028
  - Compressive strength of geopolymer concrete from volcanic ash calcination - (2023) AIP Conference Proceedings: American Institute of Physics Inc., 2741(1), 030010
  - Constitutive models for predicting mechanical properties of natural pozzolan-based alkali activated concrete - (2019) ISEC 2019 - 10th International Structural Engineering and Construction Conference:ISEC Press
  - Development of Sustainable Cementitious Binder Utilizing Silicomanganese Fumes - (2020) Smart Innovation, Systems and Technologies: Springer, 169, pp. 299–308
  - Digital image analysis of cracks in concrete of different grades - (2006) Concrete Repair, Rehabilitation and Retrofitting - Proceedings of the International Conference on Concrete Repair, Rehabilitation and Retrofitting, ICCRRR 2005, pp. 212–213
  - Effect of Incorporating Supplementary Cementitious Materials on Properties of High-Performance Fine-Grained Cement Mortar - (2024) Lecture Notes in Civil Engineering: Springer Science and Business Media Deutschland GmbH, 385, pp. 503–514
  - Effect of NaOH Molarity on the Strength and Microstructure of Natural Pozzolan-Based AAC - (2018) MATEC Web of Conferences: EDP Sciences, 203, 06017
  - Effect of various commercial of Na2SiO3 on compressive strength of Fly ash-based alkaline activated mortar - (2020) IOP Conference Series: Materials Science and Engineering: Institute of Physics Publishing, 801(1), 012078
  - Effect of volcanic ash as partial replacement of ground-granulated blast-furnace slag based alkaline activated mortar - (2022) Journal of Physics: Conference Series; Institute of Physics, 2193(1), 012059
  - Effects of using blended binder of RHA and GGBS on the properties of concrete: A review - (2017) AIP Conference Proceedings: American Institute of Physics Inc., 1892, 020027
  - Elasticity of calcium silicate brick masonry wall due to sulphate attack - (2010) Advanced Materials Research, 133-134, pp. 195–200
  - Evaluation of bond strength between normal concrete substrate and ultra high performance fiber concrete as a repair material - (2013) Procedia Engineering: Elsevier Ltd, 54, pp. 554–563
  - Experimental Assessment of the Concrete Slab with Different Depth and Diameter of Steel Rebar using GPR and Image Processing - (2020) Proceeding - 1st International Conference on Information Technology, Advanced Mechanical and Electrical Engineering, ICITAMEE 2020: Institute of Electrical and Electronics Engineers Inc., pp. 249–254, 9398322
  - Flexural strength behavior of composite UHPFC - existing concrete - (2013) Advanced Materials Research, 701, pp. 32–36
  - Hydration reaction of pozzolanic binders containing RHA and GGBS - (2023) AIP Conference Proceedings: American Institute of Physics Inc., 2881(1), 060002
  - Image Processing for Corrosion Quantification in Concrete Slabs using GPR data - (2020) Journal of Physics: Conference Series, 1471(1), 12049
  - Immobilization of Bacillus sphaericus with palm oil fuel ash for self-healing in the mortar - (2020) IOP Conference Series: Earth and Environmental Science; IOP Publishing Ltd, 616(1), 012018
  - Impact of Metakaolin, Micro-silica, and Colloidal Nano-silica on Mechanical and Microstructural Properties of Cement Mortar - (2023) Lecture Notes in Civil Engineering: Springer Science and Business Media Deutschland GmbH, 310, pp. 443–451
  - Influence of sulfate attack on elasticity of fired clay brick masonry wall - (2010) Advances and Trends in Structural Engineering, Mechanics and Computation - Proceedings of the 4th International Conference on Structural Engineering, Mechanics and Computation, SEMC 2010: CRC Press/Balkema, pp. 1001–1004
  - Influence of sulphate on the moisture movement of calcium silicate brick masonry wall - (2010) Advanced Materials Research, 133-134, pp. 201–204
  - Long-term deformations of highstrength concrete containing silica fume and metakaolin - (2001) American Concrete Institute, ACI Special Publication: American Concrete Institute, SP-200, pp. 97–111
  - Mechanical and Leaching Properties of Solidified Clinical Waste Incinerator Fly Ash Mortar - (2024) Lecture Notes in Civil Engineering: Springer Science and Business Media Deutschland GmbH, 385, pp. 531–545
  - Mechanical properties of engineered cementitious composite with palm oil fuel ash as a supplementary binder - (2013) Advanced Materials Research, 626, pp. 121–125
  - Mechanical properties of old concrete - UHPFC interface - (2012) Concrete Repair, Rehabilitation and Retrofitting III - Proceedings of the 3rd International Conference on Concrete Repair, Rehabilitation and Retrofitting, ICCRRR 2012, pp. 1035–1040
  - Pozzolanic characteristics of palm oil waste ash (POWA) and treated palm oil fuel ash (TPOFA) - (2012) Advances in Civil Engineering and Building Materials - Selected Peer Reviewed Papers from 2012 2nd International Conference on Civil Engineering and Building Materials, CEBM 2012, pp. 145–149
  - Properties of concrete containing rice husk ash under sodium chloride subjected to wetting and drying - (2012) Procedia Engineering, 50, pp. 305–313
  - Sago pith waste ash as a new alternative raw materials from agricultural waste - (2016) Materials Science Forum: Trans Tech Publications Ltd, 840, pp. 389–393
  - Sago pith waste ash as an addition to fly ash-based geopolymer mortar - (2017) Materials Science Forum: Trans Tech Publications Ltd, 888 MSF, pp. 462–465
  - Shrinkage characteristics of green engineered cementitious composites with varying palm oil fuel ash contents and water-binder ratios - (2013) Advanced Materials Research, 626, pp. 245–249
  - Strength and microstructural performance of Nano-SiO2 Gel (NSG) infused Alkaline Activated Ground Blast Furnace Slag-Ultrafine Palm Oil Fuel Ash (AAGU) based mortar - (2014) Advanced Materials Research, 856, pp. 280–284
  - Strength of Binary and Ternary Blended Cement Pastes Containing Palm Oil Fuel Ash and Metakaolin Exposed to Sodium Sulphate - (2017) MATEC Web of Conferences: EDP Sciences, 103, 01001
  - The influence of palm oil fuel ash on the fresh properties of green self-compacting concrete - (2020) IOP Conference Series: Materials Science and Engineering; Institute of Physics Publishing, 849(1), 012066
  - The role of silica fume in the adhesion of concrete restoration systems - (2013) Advanced Materials Research, 626, pp. 265–269
  - Thermal analysis and pozzolanic index of rice husk ash at different grinding time - (2012) Procedia Engineering, 50, pp. 101–109
  - Utilization of ultra-high performance fibre concrete (UHPFC) for rehabilitation a review - (2013) Procedia Engineering: Elsevier Ltd, 54, pp. 525–538
- Review
  - An Overview of Characterisation, Utilisation, and Leachate Analysis of Clinical Waste Incineration Ash - (2022) International Journal of Environmental Research: Springer Science and Business Media Deutschland GmbH, 16(5), 69
  - Assessment of important parameters involved in the synthesis of geopolymer composites: A review - (2020) Construction and Building Materials: Elsevier Ltd, 264, 120276
  - Coal bottom ash as constituent binder and aggregate replacement in cementitious and geopolymer composites: A review - (2022) Journal of Building Engineering: Elsevier Ltd, 52, 104369
  - Impact of fiber reinforcements on properties of geopolymer composites: A review - (2021) Journal of Building Engineering: Elsevier Ltd, 44, 102628
  - Pozzolanic reactivity of ultrafine palm oil fuel ash waste on strength and durability performances of high strength concrete - (2017) Journal of Cleaner Production: Elsevier Ltd, 144, pp. 511–522
  - The influence of palm oil fuel ash and metakaolin on the strength of concrete and crack resistance of reinforced concrete beam: a review - (2023) World Journal of Engineering: Emerald Publishing Original language, 20(5), pp. 989–1000

Engineering Library USM @ 2017