Professor Ir. Dr. Mohd Zulkifly Abdullah

(For USM Staff/Student Only)

The Researcher page of

Professor Ir. Dr. Mohd Zulkifly Abdullah

Researcher Information

Title:

Professor Ir. Dr. Mohd Zulkifly Abdullah

Department(s):

School of Mechanical Engineering

Location:

Engineering Campus Universiti Sains Malaysia

Phone:

6045996310

Email:

mezul@usm.my

Fax:

6045996310

Links

USM Experts

Google Scholar ID

ReseachGate ID

Scopus ID

Researcher ID

Qualifications:
B. Eng., Mechanical (Swansea, UK), M.Sc., Mechanical Engineering (Strathclyde, UK), Ph.D., Mechanical Engineering (Strathclyde, UK).

Expertise:
Combustion and Fuels, Electronic Packaging in 3D Packaging and TSV, Advanced Electronic Cooling for High Heat Flux, Porous Medium Burner for Domestic Applications. Current position: Lecturer of Universiti Sains Malaysia, School of Mechanical Engineering.

Research

Google Scholar
- Article
  - 3-D conjugate heat transfer analysis of PLCC packages mounted in-line on a Printed Circuit Board - (2009) International Communications in Heat and Mass Transfer: Pergamon, 36 (8), pp. 813-819
  - 3-D Numerical modeling and experimental investigation of a partial premix-type porous medium burner using liquefied petroleum gas fuel - (2010) Journal of Porous Media: Begel House Inc., 13 (7)
  - 3D Simulation of Three-Dimensional Filling Process for Stacked-Chip Scale Packages (S-CSPs) - (2014) COLEET 2014, pp. 42-47
  - A CFD-based experimental analysis on the effect of free stream cooling on the performance of micro processor heat sinks - (2008) International Communications in Heat and Mass Transfer: Pergamon, 35 (6), pp. 771-778
  - A comparison of ANFIS and MLR models in predicting the efficiencies of hybrid photovoltaic thermal system (PV/T) system - (2023) AIP Conference Proceedings: AIP Publishing, 2959 (1)
  - A computational fluid dynamics analysis of the wave soldering process - (2015) International Journal of Numerical Methods for Heat & Fluid Flow: Emerald Group Publishing Limited, 25 (5), pp. 1231-1247
  - A computational fluid dynamics analysis of the wave soldering process: Influence of propeller blades on fountain flow - (2015) International Journal of Numerical Methods for Heat & Fluid Flow: Emerald Group Publishing Limited, 25 (5), pp. 1231-1247
  - A cost effective and economic method for assessing the performance of photovoltaic module enhancing techniques: Analytical and experimental study - (2023) Solar Energy: Pergamon, 254, pp. 27-41
  - A critical overview of limitations of CFD modeling in nasal airflow - (2012) Journal of Medical and Biological Engineering: Biomedical Engineering Society of the Republic of China, 32 (2), pp. 77-84
  - A framework for crack detection of fresh poultry eggs at visible radiation - (2017) Computers and Electronics in Agriculture: Elsevier, 141, pp. 81-95
  - A mesoscale premixed LPG burner with surface combustion in porous ceramic foam - (2011) Energy Sources, Part A: Recovery, Utilization, and Environmental Effects: Taylor & Francis Group, 34 (1), pp. 9-18
  - A new method for assessing photovoltaic module cooler based on lifespan effectiveness factor - (2022) Case Studies in Thermal Engineering: Elsevier, 35, pp. 102126
  - A novel analytical filling time chart for design optimization of flip-chip underfill encapsulation process - (2019) The International Journal of Advanced Manufacturing Technology: Springer London, 105, pp. 3521-3530
  - A numerical investigation of laminar hybrid nanofluid flow inside circular straight minitube - (2019) Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 64 (2), pp. 275-282
  - A Proposed Temperature-Dependent Photovoltaic Efficiency Difference Factor for Evaluating Photovoltaic Module Cooling Techniques in Natural or Forced Fluid Circulation Mode (vol 44, pg 8123, 2019) - (2022) ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING: SPRINGER HEIDELBERG
  - A stationary wavelet edge detection algorithm for noisy images - (2011) School of Electrical & Electronics University Sains Malaysia Engineering Campus
  - A Study of Reinforcing and Temperature Effect of Impact Strength for Polymer Blend - (2012) Ibn AL-Haitham Journal For Pure and Applied Sciences, 25 (3), pp. 169-178
  - A study on the effect of epoxy molding compound (EMC) rheology during encapsulation of stacked-chip scale packages (S-CSP) - (2009) Journal of Reinforced Plastics and Composites: SAGE Publications, 28 (20), pp. 2527-2538
  - A study on thermoforming process of stretchable circuit and its performance in manufacturing of automotive lighting - (2017) AIP Conference Proceedings: AIP Publishing, 1901 (1)
  - AERODYNAMIC PERFORMANCE OF A REMOTELY PILOTED VEHICLE - (2006) pp. 20-34
  - Aerodynamic Performance of Swallow Bird - (2006) Technical Report, Universiti Sains Malaysia, Penang
  - Agroforestry: Harnessing the benefits - (2008) AGRIS-International System for Agricultural Science and Technology: Kepong (Malaysia) Forest Research Inst. Malaysia
  - Airflow inside the nasal cavity: visualization using computational fluid dynamics - (2010) Asian Biomedicine, 4 (4), pp. 657-661
  - An analytical convergence study of the forced air cooling in electronic packaging - "(2016) Applied Mechanics and Materials: Trans Tech Publications Ltd, 819, pp. 34-41"
  - An economic feasibility assessment of implementing photovoltaic module reflectors under Malaysian meteorological conditions - (2024) Scientific Reports: Nature Publishing Group UK, 14 (1), pp. 3349
  - An experimental investigation into mechanical and thermal properties of hybrid woven rattan/glass-fiber-reinforced epoxy composites - (2022) Polymers: MDPI, 14 (24), pp. 5562
  - An experimental investigation of shear strength and adhesion on the chip-substrate joint in LED packaging - (2022) International Journal of Adhesion and Adhesives: Elsevier, 119, pp. 103272
  - ANALISA PERILAKU ALIRAN FLUIDA CAIR PADA PROSES ENCAPSULASI IC DENGAN COMPUTATIONAL FLUID DYNAMICS - (2010) Jurnal Semai Teknologi, 4
  - Analysis of biomass-residue-based cogeneration system in palm oil mills - (2003) Biomass and Bioenergy: Pergamon, 24 (2), pp. 117-124
  - Analysis of cold flow fluidization test results for various biomass fuels - (2003) Biomass and Bioenergy: Pergamon, 24 (6), pp. 487-494
  - Analysis of encapsulation process in 3D stacked chips with different microbump array - (2012) International communications in heat and mass transfer: Pergamon, 39 (10), pp. 1616-1623
  - Analysis of fluid/structure interaction: Influence of silicon chip thickness in moulded packaging - (2013) Microelectronics Reliability: Pergamon, 53 (2), pp. 334-347
  - Analysis of LED wire bonding during encapsulation process - (2020) IOP Conference Series: Materials Science and Engineering: IOP Publishing, 1007 (1), pp. 012173
  - Analysis study of thermal and exergy efficiency in double-layer porous media burner in premixed butane-air combustion: A comparison - (2021) Manipal Journal of Science and Technology, 6 (1), pp. 3
  - Analysis Study of Thermal and Exergy Efficiency in Double-Layers Porous Media Combustion Using Different Sizes of Burner: A Comparison. - (2024) Pertanika Journal of Science & Technology, 32 (2)
  - Application Of Adaptive Neuro Fuzzy Inference System (ANFIS) In Predicting Thermal and Electrical Efficiency of a Photovoltaic Thermal (PvT) System - (2023) Nigerian Journal of Science and Engineering Infrastructure, 1 (1)
  - Application of deswirl device in cyclone dust separator - (2003) ASEAN Journal on Science and Technology for Development, 20 (3-4), pp. 203-216
  - Application of porous medium burner with micro cogeneration system - (2013) Energy: Pergamon, 50, pp. 131-142
  - Applying computational fluid dynamic to predict the thermal performance of the nacelle anti-icing system in real flight scenarios - (2015) Indian Journal of Science and Technology, 8, pp. 30
  - APPLYING NUMERICAL METHOD IN IMPROVING EMERGENCY GATE DESIGN OF MENGKUANG DAM - (2017) Advances and Applications in Fluid Mechanics: Pushpa Publishing House, 20 (3), pp. 353-362
  - Assessment of porous media burner for surface/submerged flame during porous media combustion - (2017) AIP Conference Proceedings: AIP Publishing, 1818 (1)
  - Assessment of porous media combustion with foam porous media for surface/submerged flame - (2018) Materials Today: Proceedings: Elsevier, 5 (10), pp. 20865-20873
  - Backward compatibility solder joint formation at high peak reflow temperature for aerospace applications - (2016) Arabian Journal for Science and Engineering: Springer Berlin Heidelberg, 41, pp. 1813-1823
  - Basic fluid mechanics and hydraulic machines - (2008) BS publications
  - Bio-inspired sensor fusion for quality assessment of harumanis mangoes - (2012) Procedia Chemistry: Elsevier, 6, pp. 165-174
  - Case Studies in Thermal Engineering - (2019) Case Studies in Thermal Engineering: Elsevier, 6, pp. 238-250
  - CFD modeling of pin shape effects on capillary flow during wave soldering - (2014) International Journal of Heat and Mass Transfer: Pergamon, 72, pp. 400-410
  - CFD simulation and experimental analysis of flow dynamics and grinding performance of opposed fluidized bed air jet mill - (2011) International Journal of Mineral Processing: Elsevier, 98 (1-2), pp. 94-105
  - CFD Simulations of Oscillating Sub-Boundary Layer Vortex Generators for Diffuser Flow Separation Control - (2008) 5 (1), pp. 25-35
  - Characteristic airflow patterns during inspiration and expiration: Experimental and numerical investigation - (2015) Journal of medical and biological engineering: Springer Berlin Heidelberg, 35, pp. 387-394
  - Characterization and Evaluation of PIV Illumination System Using High Power Light Emitting Diodes for WaterTank Applications - (2018) Instruments and Experimental Techniques: Pleiades Publishing, 61, pp. 436-444
  - Characterization of working fluid in vertically mounted finned U-shape twin heat pipe for electronic cooling - (2012) Energy Conversion and Management: Pergamon, 62, pp. 31-39
  - COLOR VISION SYSTEM FOR RIPENESS INSPECTION OF OIL PALM ELAEIS GUINEENSIS - (2002) Journal of food processing and preservation: Blackwell Publishing Ltd, 26 (3), pp. 213-235
  - Combustion characteristics of butane porous burner for thermoelectric power generation - (2015) Journal of Combustion: Hindawi Publishing Corporation, 2015 (1), pp. 121487
  - Compact Multislot Planar Monopole Antenna for Microwave Imaging - (2017) Advanced Science Letters: American Scientific Publishers, 23 (11), pp. 11031-11034
  - Comparative assessment of a porous burner using vegetable cooking oil–kerosene fuel blends for thermoelectric and thermophotovoltaic power generation - (2016) Fuel: Elsevier, 180, pp. 137-147
  - Comparative Studies of Lattice Boltzmann and Finite Volume Methods on 3D Benchmark Problem - (2015) Journal of Research and Development
  - Comparative study of pressurized and capillary underfill flow using lattice Boltzmann method - (2019) Arabian Journal for Science and Engineering: Springer Berlin Heidelberg, 44, pp. 7627-7652
  - Comparative study of the scaling effect on pressure profiles in capillary underfill process - (2017) IOP Conference Series: Materials Science and Engineering: IOP Publishing, 203 (1), pp. 012012
  - Comparative study on porous media combustion characteristics using different discrete materials - (2018) MATEC Web of Conferences: EDP Sciences, 153, pp. 01007
  - Comparison of Inspiratory and expiratory flow inside the nasal cavity using numerical methods - (2011) J. Med. Biol. Eng, 31 (3), pp. 201-206
  - Computational aerodynamic analysis on perimeter reinforced (PR)-compliant wing - (2013) Chinese Journal of Aeronautics: Elsevier, 26 (5), pp. 1093-1105
  - Computational Analysis of Polymer Melt Filling in a Medical Mold Cavity During the Injection Molding Process. - (2023) Pertanika Journal of Science & Technology, 31 (1)
  - Computational and experimental investigations in a cyclone dust separator - (1997) Proceedings of the Institution of mechanical engineers, Part E: Journal of process mechanical engineering: SAGE Publications, 211 (4), pp. 247-257
  - Computational fluid dynamic and thermal analysis for BGA assembly during forced convection reflow soldering process - (2012) Soldering & surface mount technology: Emerald Group Publishing Limited, 24 (2), pp. 77-91
  - Computational fluid dynamics study of pull and plug flow boundary condition on nasal airflow - (2013) Biomedical Engineering: Applications, Basis and Communications: National Taiwan University, 25 (4), pp. 1350044
  - Computational fluid dynamics study of the effect of posture on airflow characteristics inside the nasal cavity - (2013) Asian Biomedicine, 7 (6), pp. 835-840
  - Computational prediction into staggered film cooling holes on convex surface of turbine blade - (2012) International communications in heat and mass transfer: Pergamon, 39 (9), pp. 1367-1374
  - Computational study of a new scheme for a film-cooling hole on convex surface of turbine blades - (2013) International communications in heat and mass transfer: Pergamon, 43, pp. 90-99
  - Conjugate film cooling of a new multi-layer convex surface of turbine blades - (2013) International communications in heat and mass transfer: Pergamon, 45, pp. 86-94
  - Controlling of Intermetallic compound solder interconnection-printed circuit board using nickel coating - (2018) Sains Malaysiana: UNIVERSITI KEBANGSAAN MALAYSIA, 47 (9), pp. 2157-2162
  - Correction to: A Proposed Temperature-Dependent Photovoltaic Efficiency Difference Factor for Evaluating Photovoltaic Module Cooling Techniques in Natural or Forced Fluid Circulation Mode - (2022) Arabian Journal for Science and Engineering: Springer Berlin Heidelberg, pp. 1-1
  - Correlating scalants characteristic and air bubbling rate in submerged vacuum membrane distillation: A fouling control strategy - (2021) Journal of Membrane Science: Elsevier, 621, pp. 118991
  - Corrigendum to Combustion in porous media and its applications-A comprehensive survey [Journal of Environmental Management 90 (2009) 2287-2312] - (2009) Journal of environmental management: Elsevier, 91 (2)
  - Cost and time effective performance evaluation methods for photovoltaic module cooling techniques: Analytical and experimental study - (2022) Applied Energy: Elsevier, 326, pp. 119940
  - Counter and parallel two-phase flow microchannel heat sinks for electronics cooling - (2006) International Journal of Heat Exchangers: Edwards, 7 (1), pp. 57
  - CUF scaling effect on contact angle and threshold pressure - (2017) Soldering & Surface Mount Technology: Emerald Publishing Limited, 29 (4), pp. 173-190
  - Design and fabrication of a dual rotor-embedded wing vertical take-off and landing unmanned aerial vehicle - (2021) Unmanned Systems: World Scientific Publishing Company, 9 (1), pp. 45-63
  - Design and optimization of piezoelectric fans for cooling of microelectronic devices - (2007) Journal of microelectronics and electronic packaging: International Microelectronics Assembly and Packaging Society Collection, 4 (3), pp. 121-129
  - Design of chainless bicycle transmission system using four linkages mechanism - (2020) IOP Conference Series: Materials Science and Engineering: IOP Publishing, 1007 (1), pp. 012167
  - Design of disposable DNA biosensor microchip with amperometric detection featuring PCB substrate - (2013) BioChip Journal: The Korean BioChip Society (KBCS), 7, pp. 51-56
  - Development and performance analysis of novel cast copper–SiC–Gr hybrid composites - (2009) Materials & Design: Elsevier, 30 (6), pp. 1957-1965
  - Development of a Compact Wide‐Slot Antenna for Early Stage Breast Cancer Detection Featuring Circular Array Full‐View Geometry - (2014) International Journal of Antennas and Propagation: Hindawi Publishing Corporation, 2014 (1), pp. 309321
  - Development of a neutron tomography system for industrial applications - (2009) Measurement: Elsevier, 42 (7), pp. 1017-1026
  - Development of energy efficient porous medium burners on surface and submerged combustion modes - (2011) Energy: Pergamon, 36 (8), pp. 5132-5139
  - Development of flexible wings and flapping mechanism with integrated electronic control system, for micro air vehicle research - (2013) Experimental Techniques: Springer International Publishing, 37, pp. 25-37
  - Development of foam porous media to undergo surface and submerged flame during premixed combustion - (2019) IOP Conference Series: Materials Science and Engineering: IOP Publishing, 505 (1), pp. 012123
  - Development of premixed burner based on stabilized combustion within discrete porous medium - (2011) Journal of Porous Media: Begel House Inc.:Begel House Inc., 14 (10)
  - Development of wind turbine blade using bamboo fiber composite material - (2023) AIP Conference Proceedings: AIP Publishing, 2680 (1)
  - Discrete phase method particle simulation of ultra-fine package assembly with SAC305-TiO2 nano-reinforced lead free solder at different weighted percentages - (2017) Microelectronics Reliability: Pergamon, 79, pp. 336-351
  - Discrete phase method study of ball grid array underfill process using nano-silica filler-reinforced composite-encapsulant with varying filler loadings - (2017) Microelectronics Reliability: Pergamon, 72, pp. 45-64
  - Discrete Phase Model (DPM) study of nano-reinforced Lead Free Solder Sn-3.0 Ag-0.5 Cu (SAC305) - (2018) IOP Conference Series. Materials Science and Engineering: IOP Publishing, 370 (1)
  - Discrimination and classification of Eurycoma longifolia Jack in medicinal foods by means of a DSP-based electronic taste sensor - (2004) Transactions of the Institute of Measurement and Control: Sage Publications, 26 (1), pp. 19-39
  - Discrimination and classification of fresh-cut starfruits (Averrhoa carambola L.) using automated machine vision system - (2006) Journal of Food Engineering: Elsevier, 76 (4), pp. 506-523
  - Diversification of temporal sewage loading concentration in tropical climates - (2019) IOP Conference Series: Earth and Environmental Science: IOP Publishing, 264, pp. 012026
  - Double-layer micro porous media burner from lean to rich fuel mixture: analysis of entropy generation and exergy efficiency - (2021) Entropy: MDPI, 23 (12), pp. 1663
  - Dynamic warpage simulation of molded PCB under reflow process - (2023) Circuit World: Emerald Publishing Limited, 49 (2), pp. 202-210
  - Early stage breast cancer detection by means of time-domain ultra-wide band sensing - (2011) Measurement Science and Technology: IOP Publishing, 22 (11), pp. 114016
  - Effect of adhesive force on underfill process based on lattice Boltzmann method - (2020) Microelectronics International: Emerald Publishing Limited, 37 (1), pp. 54-63
  - Effect of Al2O3-H2O nanofluid concentration on heat transfer in a loop heat pipe - (2014) Procedia Materials Science: Elsevier, 5, pp. 137-146
  - Effect of ceramic coating in combustion and cogeneration performance of Al2O3 porous medium - (2016) Journal of the Energy Institute: Elsevier, 89 (1), pp. 81-93
  - Effect of ceramic coating in combustion and cogeneration performance of Al2O3 porous medium. - (2015) Journal of the Energy Institute, 30, pp. 1e13
  - Effect of component property and mounting on the flexible printed circuit board electronics in the flow environment - (2012) International Journal of Research in Engineering and Technology, 1
  - Effect of contact angle on meniscus evolution and contact line jump of underfill fluid flow in flip-chip encapsulation - (2020) CFD Letters, 12 (6), pp. 28-38
  - Effect of CTAB surfactant on the stability and thermal conductivity of mono and hybrid systems of graphene and FMWCNT nanolubricant - (2022) Colloids and Surfaces A: Physicochemical and Engineering Aspects: Elsevier, 648, pp. 129275
  - Effect of diffuser and nozzle shape orifice to the synthetic jet centerline velocity - (2020) Proceedings of Mechanical Engineering Research Day, 2020, pp. 389-390
  - Effect of filling level and fillet profile on pin-through-hole solder joint - (2019) The International Journal of Advanced Manufacturing Technology: Springer London, 102, pp. 1467-1485
  - Effect of Free Stream Turbulence on the Performance of NACA-0015 Airfoil - (2003) AJSTD, 20 (2), pp. 117-124
  - Effect of heat pipe’s configuration in managing the temperature of EV battery - (2023) CFD Letters, 15 (3), pp. 22-34
  - Effect of ILU dispensing types for different solder bump arrangements on CUF encapsulation process - (2016) Microelectronic Engineering: Elsevier, 163, pp. 83-97
  - Effect of inclined pins on flow and heat transfer characteristics for single row in rectangular channel - (2017) Journal of Research and Applications in Mechanical Engineering, 5 (2), pp. 106-118
  - Effect of piezoelectric fan mode shape on the heat transfer characteristics - (2014) International Communications in Heat and Mass Transfer: Pergamon, 52, pp. 140-151
  - Effect of pin inclination angle on flow and heat transfer characteristics for a row of pins in a flow channel - (2020) International Communications in Heat and Mass Transfer: Pergamon, 110, pp. 104396
  - Effect of scale size, orientation type and dispensing method on void formation in the CUF encapsulation of BGA - (2018) Sādhanā: Springer India, 43, pp. 1-14
  - Effect of side and tip gaps of a piezoelectric fan on microelectronic cooling - (2013) IEEE Transactions on Components, Packaging and Manufacturing Technology: IEEE, 3 (9), pp. 1545-1553
  - Effect of sintering temperature on mullite ceramics fabricated from treated palm oil fuel ash - (2015) Advanced Materials Research: Trans Tech Publications Ltd, 1087, pp. 202-206
  - Effect of skin flexibility on aerodynamic performance of flexible skin flapping wings for micro air vehicles - (2015) Experimental Techniques: Springer International Publishing, 39, pp. 11-20
  - Effect of solder bump shapes on underfill flow in flip-chip encapsulation using analytical, numerical and PIV experimental approaches - (2018) Microelectronics Reliability: Pergamon, 81, pp. 41-63
  - Effect of solder joint arrangements on BGA lead-free reliability during cooling stage of reflow soldering process - (2012) IEEE Transactions on Components, Packaging and Manufacturing Technology: IEEE, 2 (12), pp. 2098-2107
  - Effect of stacking chips and inlet positions on void formation in the encapsulation of 3D stacked flip-chip package - (2012) International Communications in Heat and Mass Transfer: Pergamon, 39 (5), pp. 670-680
  - Effect of synchronized piezoelectric fans on microelectronic cooling performance - (2013) International Communications in Heat and Mass Transfer: Pergamon, 43, pp. 81-89
  - Effect of temperature on flexible printed circuit board layout during reflow soldering process - (2023) AIP Conference Proceedings: AIP Publishing, 2680 (1)
  - Effect of the gap height of radial gate on the volumetric flow rate in dam - (2018) IOP Conference Series: Materials Science and Engineering: IOP Publishing, 370 (1), pp. 012062
  - Effect of thermocapillary action in the underfill encapsulation of multi-stack ball grid array - (2016) Microelectronics Reliability: Pergamon, 66, pp. 143-160
  - Effect of TiO2-Al2O3 nanoparticle mixing ratio on the thermal conductivity, rheological properties, and dynamic viscosity of water-based hybrid nanofluid - (2020) Journal of Materials Research and Technology: Elsevier, 9 (6), pp. 13781-13792
  - Effect of Ultra-low Vegetable Oil Droplets on Microporous Media Burner Under Surface and Submerged Flames - (2019) Arabian Journal for Science and Engineering: Springer Berlin Heidelberg, 44 (6), pp. 5921-5935
  - Effect of vertical stacking dies on flow behavior of epoxy molding compound during encapsulation of stacked-chip scale packages - (2010) Heat and mass transfer: Springer-Verlag, 46, pp. 1315-1325
  - Effect of volume concentration and nanofluid temperature on the thermal conductivity of mono and hybrid Al2O3-TiO2 nanofluid - (2021) AIP Conference Proceedings: AIP Publishing, 2339 (1)
  - Effect of wing deformation on the aerodynamic performance of flapping wings: fluid-structure interaction approach - "(2016) Journal of Aerospace Engineering: American Society of Civil Engineers, 29 (4), pp. 04016006"
  - Effects of aspect ratio in moulded packaging considering fluid/structure interaction: a CFD modelling approach - (2017) Journal of Applied Fluid Mechanics, 10 (6), pp. 1799-1811
  - Effects of diamond nanoparticles reinforcement into lead-free Sn–3.0 Ag–0.5 Cu solder pastes on microstructure and mechanical properties after reflow soldering process - (2015) Materials & Design: Elsevier, 82, pp. 206-215
  - Effects of different viscometer test on stencil printing process for CFD simulation - (2021) Research Square
  - Effects of Fe2NiO4 nanoparticles addition into lead free Sn–3.0 Ag–0.5 Cu solder pastes on microstructure and mechanical properties after reflow soldering process - (2015) Materials & Design: Elsevier, 67, pp. 197-208
  - EFFECTS OF GEOMETRY AND NUMBER OF HOLLOW ON THE PERFORMANCE OF RECTANGULAR FINS IN MICROCHANNEL HEAT SINKS. - (2013) Journal of Thermal Science & Technology/Isı Bilimi ve Tekniği Dergisi, 33 (1)
  - EFFECTS OF HORIZONTAL/VERTICAL FIN TIP GAPS ON MICROCHANNEL HEAT SINKS PERFORMANCE IN ELECTRONIC COOLING. - (2013) Journal of Thermal Science & Technology/Isı Bilimi ve Tekniği Dergisi, 33 (2)
  - Effects of outlet vent arrangement on air traps in stacked-chip scale package encapsulation - (2012) International Communications in Heat and Mass Transfer: Pergamon, 39 (3), pp. 405-413
  - Effects of PCB thickness on adjustable fountain wave soldering - (2015) Sadhana: Springer India, 40, pp. 2197-2220
  - Effects of pressure on thermal contact resistance for rough mating surfaces - (2001) ASEAN Journal on Science and Technology for Development, 18 (2)
  - Effects of Solder Temperature on Pin Through‐Hole during Wave Soldering: Thermal‐Fluid Structure Interaction Analysis - (2014) The Scientific World Journal: Hindawi Publishing Corporation, 1, pp. 482363
  - Effects of Temperature on the Wave Soldering of Printed Circuit Boards: CFD Modeling Approach. - (2016) Journal of Applied Fluid Mechanics, 9 (4)
  - Effects of the preheat layer thickness on surface/submerged flame during porous media combustion of micro burner - (2017) Energy: Pergamon, 122, pp. 103-110
  - Effects of tip gap and amplitude of piezoelectric fans on the performance of heat sinks in microelectronic cooling - (2012) Heat and Mass Transfer: Springer-Verlag, 48, pp. 893-901
  - Empirical Viscosity Modeling for SiO2 and Al2O3Nanofluids using the Response Surface Method - (2020) Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 75 (3), pp. 63-72
  - Enhancement of nanofluid heat transfer in a mini-tube using SiO2 nanoparticles - (2019) Advances in Materials and Processing Technologies: Taylor & Francis, 5 (4), pp. 607-616
  - Enhancements of Structural and Optical Properties of MgO: SnO2 Nanostructure Films - (2023) East European Journal of Physics, 3, pp. 546-554
  - Enhancing Closed System Efficiency through CuO Nanofluids: Investigating Thermophysical Properties and Heat Transfer Performance - "(2024) Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 117 (1), pp. 179-188"
  - Entropy generation and exergy analysis of premixed fuel-air combustion in micro porous media burner - (2020) Entropy: MDPI, 22 (10), pp. 1104
  - Evaluation of Orifice Flow Meter Accuracy under Pulsation Conditions - (2015) Advanced Materials Research: Trans Tech Publications Ltd, 1115, pp. 472-475
  - Evaluation of Stability and Enhancement of Nano Fluid Methods - (2024) Journal of Physics: Conference Series: IOP Publishing, 2688 (1), pp. 012016
  - Evolution of monoplane fixed wing micro air vehicle’s shape and design review - (2012) 2nd. International Conference on Arts, Social Sciences & Technology
  - Experiential study on temperature and emission performance of micro burner during porous media combustion - (2018) IOP conference series: Materials science and engineering: IOP Publishing, 370 (1), pp. 012057
  - EXPERIMENT AND SIMULATION TO DEVELOP CLEAN POROUS MEDIUM SURFACE COMBUSTOR USING LPG. - (2013) Journal of Thermal Science & Technology/Isı Bilimi ve Tekniği Dergisi, 33 (1)
  - Experiment on forced convective heat transfer enhancement using MWCNTs/GNPs hybrid nanofluid and mini-tube - (2017) International Journal of Heat and Mass Transfer: Pergamon, 115, pp. 1121-1131
  - Experimental analysis and FEM simulation of finned U-shape multi heat pipe for desktop PC cooling - (2011) Energy Conversion and Management: Pergamon, 52 (8-9), pp. 2937-2944
  - Experimental analysis and FEM simulation of loop heat charged with diamond nanofluid for desktop PC cooling - (2015) IOP Conference Series: Materials Science and Engineering: IOP Publishing, 88 (1), pp. 012038
  - Experimental analysis and FEM simulation of novel finned loop heat pipe - (2014) Advanced Materials Research: Trans Tech Publications Ltd, 925, pp. 481-485
  - Experimental analysis of a porous burner operating on kerosene–vegetable cooking oil blends for thermophotovoltaic power generation - (2015) Energy conversion and management: Pergamon, 96, pp. 544-560
  - Experimental analysis on combustion characteristics of single layer porous media for various burner sizes - (2020) IOP Conference Series: Materials Science and Engineering: IOP Publishing, 852 (1), pp. 012085
  - Experimental and numerical investigation of 3D gas flow temperature field in infrared heating reflow oven with circulating fan - (2015) International Journal of Heat and Mass Transfer: Pergamon, 87, pp. 49-58
  - Experimental and numerical investigation of flow and thermal effects on flexible printed circuit board - (2017) Microelectronics Reliability: Pergamon, 72, pp. 5-17
  - Experimental and numerical studies of finned L-shape heat pipe for notebook-PC cooling - (2013) IEEE Transactions on Components, Packaging and Manufacturing Technology: IEEE, 3 (6), pp. 978-988
  - Experimental and Numerical Studies of Porous Media Combustion in Micro Burne - (2018) Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 43 (1), pp. 112-120
  - Experimental investigation and optimization of heat input and coolant velocity of finned twin U-shaped heat pipe for CPU cooling - (2013) Experimental Techniques: Springer International Publishing, 37, pp. 34-40
  - Experimental investigation and optimization of nanoparticle mass concentration and heat input of loop heat pipe - (2015) International Journal of Aerospace and Mechanical Engineering, 9 (10), pp. 1830-1835
  - Experimental investigation of aerodynamic performances on a rotating cylinder with surface roughness using light weight smart motor (LWSM) - (2017) NISCAIR-CSIR, India, pp. 1673-1681
  - Experimental investigation of the performance of a liquid fuel-fired porous burner operating on kerosene-vegetable cooking oil (VCO) blends for micro-cogeneration of thermoelectric power - (2015) Renewable Energy: Pergamon, 74, pp. 505-516
  - Experimental investigation of water-cooled heat pipes in the thermal management of lithium-ion EV batteries - (2019) Arabian Journal for Science and Engineering: Springer Berlin Heidelberg, 44, pp. 7541-7552
  - EXPERIMENTAL INVESTIGATION ON ELECTRONIC COOLING PERFORMANCE USING POROUS MEDIUM HEAT SINK - (2015) 1 (1)
  - Experimental investigation on the heat transfer performance of heat pipes in cooling HEV Lithium-ion batteries - (2018) Heat Transfer Research: Begel House Inc., 49 (17)
  - Experimental Investigation on Thermal Performance of a Vapour Chamber for Electronic Cooling - (2012) 4 th International Conference on Science & Technology: Applications in Industry & Education (ICSTIE 2012)
  - Experimental Method on Solder Joint of Ball Grid Array Using Reflow Oven - (2018) Int J Curr Sci Eng Technol, pp. 487-92
  - Experimental study of self-alignment during reflow soldering process - (2018) Journal of Advanced Manufacturing Technology (JAMT), 12 (1(2)), pp. 355-366
  - Experimental study on luminous intensity of white LEDs of different configurations - (2020) IOP Conference Series: Materials Science and Engineering: IOP Publishing, 1007 (1), pp. 012145
  - Experimental study on the cooling performance of high power LED arrays under natural convection - (2013) IOP Conference Series: Materials Science and Engineering: IOP Publishing, 50 (1), pp. 012030
  - Experimental study on the effect of skin flexibility on aerodynamic performance of flapping wings for micro air vehicles - (2014) Applied Mechanics and Materials: Trans Tech Publications Ltd, 629, pp. 18-23
  - EXPERIMENTAL, CHARACTERIZATION OF A BATCH FEED BIOMASS GASIFIER SYSTEM FOR INTERNAL COMBUSTION ENGINES - Natural gas, 2, pp. V5
  - Fabrication and study on tribological characteristics of cast copper–TiO2–boric acid hybrid composites - (2009) Materials & design: Elsevier, 30 (6), pp. 1632-1637
  - Feasibility study of cogeneration in a plywood industry with power export to grid - (2009) Applied Energy: Elsevier, 86 (5), pp. 657-662
  - Filling efficiency of flip-chip underfill encapsulation process - (2020) Soldering & Surface Mount Technology: Emerald Publishing Limited, 32 (1), pp. 10-18
  - Finite element analysis on the effect of solder joint geometry for the reliability of ball grid array assembly with flexible and rigid PCBs - (2014) Journal of Engineering Science and Technology: Taylor's University, 9 (1), pp. 47-63
  - Finite volume analysis of pressurized underfill encapsulation process - (2016) ARPN J. Eng. Appl. Sci, 11 (1), pp. 166-171
  - Finite volume based CFD simulation of pressurized flip-chip underfill encapsulation process - (2010) Microelectronics Reliability: Pergamon, 50 (1), pp. 98-105
  - Finite volume method study on contact line jump phenomena and dynamic contact angle of underfill flow in flip-chip of various bump pitches - (2019) IOP Conference Series: Materials Science and Engineering: IOP Publishing, 530 (1), pp. 012012
  - Finite volume-based simulation of the wave soldering process: influence of the conveyor angle on pin-through-hole capillary flow - (2016) Numerical Heat Transfer, Part A: Applications: Taylor & Francis, 69 (3), pp. 295-310
  - Flow analysis inside coated porous media - (2019) Advanced Engineering for Processes and Technologies: Springer International Publishing, pp. 153-160
  - Flow Behavior Analysis of Emc in Molded Underfill (Muf) Encapsulation for Multi Flip-Chip Package - (2018) Journal of Physics: Conference Series: IOP Publishing, 1082 (1), pp. 012015
  - Flow induced deflection and stress on flexible printed circuit board in fan-cooled electronic systems: FSI approach - (2011) IEEE Transactions on Components, Packaging and Manufacturing Technology: IEEE, 2 (4), pp. 617-624
  - Flow of a second grade fluid with fractional derivatives due to a quadratic time dependent shear stress - (2018) Alexandria engineering journal: Elsevier, 57 (3), pp. 1963-1969
  - Fluid structure interaction of unsteady aerodynamics of flapping wing at low Reynolds number - (2013) Engineering Applications of Computational Fluid Mechanics: Taylor & Francis, 7 (1), pp. 144-158
  - Fluid/structure interaction analysis of the effects of solder bump shapes and input/output counts on moulded packaging - (2011) EEE Transactions on Components, Packaging and Manufacturing Technology: IEEE, 2 (4), pp. 604-616
  - Fluid/Structure interaction investigation in PBGA packaging - (2012) IEEE Transactions on Components, Packaging and Manufacturing Technology: IEEE, 2 (11), pp. 1786-1795
  - Fluid/structure interaction study on the variation of radial gate’s gap height in dam - (2018) IOP Conference Series: Materials Science and Engineering: IOP Publishing, 370 (1), pp. 012063
  - Fluid–structure interaction analysis on the effect of chip stacking in a 3D integrated circuit package with through-silicon vias during plastic encapsulation - (2014) Microelectronic Engineering: Elsevier, 113, pp. 40-49
  - Fluid–Structure Interaction Study of IC Stacking Chips Arrangement During Encapsulation Process - (2019) CFD Letters, 11 (4), pp. 1-15
  - FSI analysis of the effect of aspect ratio of stacked chip in encapsulation process of moulded underfill packaging - (2015) Applied Mechanics and Materials: Trans Tech Publications Ltd, 786, pp. 361-366
  - FSI analysis of wire sweep in encapsulation process of plastic ball grid array packaging - (2013) Journal of Thermal Science and Technology, 33, pp. 101-109
  - FSI ANALYSIS ON THE EFFECT OF MEMBRANE RIGIDITY ON LAMINAR FLOW SEPARATION OVER NACA 643-218 AIRFOIL - (2015) 1 (1)
  - FSI implications of EMC rheological properties to 3D IC with TSV structures during plastic encapsulation process - (2013) Microelectronics Reliability: Pergamon, 53 (4), pp. 600-611
  - FSI simulation of wire sweep PBGA encapsulation process considering rheology effect - (2011) IEEE Transactions on Components, Packaging and Manufacturing Technology: IEEE, 2 (4), pp. 593-603
  - FSI study of the effect of air inlet/outlet arrangements on the reliability and cooling performances of flexible printed circuit board electronics - (2016) Journal of Thermal Science and Technology, 33 (1), pp. 43-53
  - FVM based numerical study on the effect of solder bump arrangement on capillary driven flip chip underfill process - (2010) International Communications in Heat and Mass Transfer: Pergamon, 37 (3), pp. 281-286
  - FVM based simulation on multi-stack ball grid array (BGA) - (2016) AIP Conference Proceedings: AIP Publishing, 1775 (1)
  - Glycosidases activity in salinity-tolerant rice grown on saline soil under Malaysia condition. - (2015) pp. 107-113
  - Gold Pre-tinning through Single Dynamic Wave Soldering for Pin Through-Hole and Surface Mount Components - (2015) Int'l Conference on Computer Science, Data Mining & Mechanical Eng.
  - Hardness profiles of Sn-3.0 Ag-0.5 Cu-TiO2 composite solder by nanoindentation - (2016) Materials Science and Engineering: A: Elsevier, 669, pp. 178-186
  - Heat transfer analysis of diffusion furnace for wafer annealing process - (2020) Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 75 (3), pp. 43-53
  - Heat transfer analysis on wafer annealing process in semiconductor multi-wafer furnace using CFD simulation - (2022) Journal of Mechanical Science and Technology: Korean Society of Mechanical Engineers, 36 (6), pp. 3143-3151
  - Heat transfer and deformation analysis of flexible printed circuit board under thermal and flow effects - (2021) Circuit World: Emerald Publishing Limited, 47 (2), pp. 213-221
  - Heat transfer and entropy generation abilities of MWCNTs/GNPs hybrid nanofluids in microtubes - (2019) Entropy: MDPI, 21 (5), pp. 480
  - Heat transfer and flow characteristics of two-stream in a channel with synthetic jet - (2022) Proceedings of Mechanical Engineering Research Day 2022: UTeM Press, 2022, pp. 269-270
  - Heat transfer enhancement by flexible printed circuit board's deformation - (2017) International Communications in Heat and Mass Transfer: Pergamon, 84, pp. 86-93
  - Heat transfer enhancement of LEDs with a combination of piezoelectric fans and a heat sink - (2017) Microelectronics Reliability: Pergamon, 68, pp. 39-50
  - Heat Transfer in a Loop Heat Pipe using Diamond-H2O Nanofluid - (2018) Heat Transfer Engineering: Taylor & Francis, 39 (13-14), pp. 1117-1131
  - Heat transfer in a loop heat pipe using Fe2NiO4-H2O nanofluid - (2017) MATEC Web of Conferences: EDP Sciences, 109, pp. 05001
  - Heat transfer performance of a synthetic jet at various driving frequencies and diaphragm amplitude - (2019) Arabian Journal for Science and Engineering: Springer Berlin Heidelberg, 44, pp. 1043-1055
  - Heat Transfer Performance of a SyntheticJet Generated byDiffuser-Shaped Orifice - (2019) Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 53 (1), pp. 122-128
  - High Temperature Hygroscopic Swelling of Polymers in Electronic Packaging - (2024) 2024 International Conference on Electronics Packaging (ICEP): IEEE, pp. 59-60
  - High-resolution imaging of dielectric profiles by using a time-domain ultra wideband radar sensor - (2011) Measurement: Elsevier, 44 (5), pp. 859-870
  - High-speed fractal image compression featuring deep data pipelining strategy - (2018) IEEE Access: IEEE, 6, pp. 71389-71403
  - High-speed implementation of fractal image compression in low cost FPGA - (2016) Microprocessors and microsystems: Elsevier, 47, pp. 429-440
  - https://scholar.google.com/citations?view_op=view_citation&hl=en&user=lGVek4QAAAAJ&cstart=1200&pagesize=100&citation_for_view=lGVek4QAAAAJ:rQKKVauEoioC - (2021) Microelectronics International: Emerald Publishing Limited, 38 (2), pp. 33-45
  - Husk-fueled steam turbine cogeneration for a rice mill with power export—A case study - (2011) Energy Sources, Part A: Recovery, Utilization, and Environmental Effects: Taylor & Francis Group, 33 (8), pp. 724-734
  - Hybrid mesh for nasal airflow studies - (2013) Computational and Mathematical Methods in Medicine: Hindawi Publishing Corporation, 2013 (1), pp. 727362
  - Impacts of impeller blade number on centrifugal pump performance under critical cavitation conditions - (2024) Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering: SAGE Publications, pp. 09544089241278219
  - Implications of adjustable fountain wave in pin through hole soldering process - (2014) Arabian Journal for Science and Engineering: Springer Berlin Heidelberg, 39, pp. 9101-9111
  - Improvement of Porous Porcelain through Glaze Coating - (2016) Materials Science Forum: Trans Tech Publications Ltd, 840, pp. 19-23
  - Influence of copper pillar bump structure on flip chip packaging during reflow soldering: a numerical approach - (2021) Microelectronics International: Emerald Publishing Limited, 38 (4), pp. 172-181
  - Influence of gap height in flip chip underfill process with non-Newtonian flow between two parallel plates - (2012) Journal of Electronic Packaging, 134 (1), pp. 011003
  - Influence of Gap Height in Flip Chip Underfill Process With Non-Newtonian Flow Between Two Parallel Plates. - (2012) Journal of Electronic Packaging: ASME, 134
  - Influence of low concentration of diamond water nanofluid in loop heat pipe - (2017) International Journal of Heat and Technology: Edizioni ETS, 35 (3), pp. 539-548
  - Influence of material properties on the fluid-structure interaction aspects during molded underfill process - (2017) MATEC web of conferences: EDP Sciences, 97, pp. 01059
  - Influence of moisture concentration and hydrophobic material on induced stress in FCBGA package under reflow - (2022) Soldering & Surface Mount Technology: Emerald Publishing Limited, 34 (2), pp. 103-115
  - Influence of nanofluid on heat transfer in a loop heat pipe - (2013) International communications in heat and mass transfer: Pergamon, 47, pp. 82-91
  - Influence of nanoparticles on thermophysical properties of hybrid nanofluids of different volume fractions - (2022) Nanomaterials: MDPI, 12 (15), pp. 2570
  - Influence of pin offset in PCB through-hole during wave soldering process: CFD modeling approach - (2013) International Communications in Heat and Mass Transfer: Pergamon, 48, pp. 116-123
  - Influence of printed circuit board thickness in wave soldering - (2017) Scientia Iranica: Sharif University of Technology, 24 (6), pp. 2963-2976
  - Influence of PTH offset angle in wave soldering with thermal-coupling method - (2014) Soldering & Surface Mount Technology: Emerald Group Publishing Limited, 26 (3), pp. 97-109
  - Influence of reaction layer thickness on surface/submerged flame during porous media combustion of micro burner - (2019) IOP Conference Series: Materials Science and Engineering: IOP Publishing, 508 (1), pp. 012072
  - Influence of Silica Oxide Nanofluid for Different Concentrations on Photovoltaic Cell - (2024) Journal of Nanofluids: American Scientific Publishers, 13 (3), pp. 772-782
  - Influence of solder bump arrangements on molded IC encapsulation - (2014) Microelectronics reliability: Pergamon, 54 (4), pp. 796-807
  - Influence of the electrodeposition potential on the crystallographic structure and effective magnetic easy axis of cobalt nanowires - (2016) RSC advances: Royal Society of Chemistry, 6 (17), pp. 14266-14272
  - Investigation of micro burner performance during porous media combustion for surface and submerged flames - (2018) IOP conference series: Materials science and engineering: IOP Publishing, 370 (1), pp. 012049
  - Investigation of Nano-Reinforced Lead-Free Solder During Reflow Soldering-A Molecular Dynamic Approach - (2020) CFD Letters, 12 (12), pp. 75-84
  - Investigation of Structural and Aerodynamic Performance of Twist Morphing Wing MAV - (2013) IEEE Symposium on Business, Engineering and Industrial Applications, Kuching, Malaysia, pp. 142-147
  - Investigation of the fluid/structure interaction phenomenon in IC packaging - (2012) Microelectronics Reliability: Pergamon, 52 (1), pp. 241-252
  - Investigation of Thermodynamic Properties and Stability of Metal Oxide (CuO and Al 2 O 3)/Deionized Water Nanofluids for Enhanced Heat Transfer Applications - (2024) Research Square
  - Investigation of Thermodynamic Properties and Stability of Metal Oxide (CuO and Al2O3)/Deionized Water Nanofluids for Enhanced Heat Transfer Applications - (2024) Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 121 (1), pp. 148-172
  - Investigation on nano-reinforced solder paste after reflow soldering part 1: Effects of nano-reinforced solder paste on melting, hardness, spreading rate, and wetting quality - (2018) Microelectronics Reliability: Pergamon, 84, pp. 230-237
  - Investigations of infrared desktop reflow oven with FPCB substrate during reflow soldering process - (2021) Metals: MDPI, 11 (8), pp. 1155
  - Lattice Boltzmann and finite volume simulations of multiphase flow in BGA encapsulation process - (2015) J Eng Appl Sci, 10 (17), pp. 7354-60
  - Lattice Boltzmann method of different BGA orientations on I-type dispensing method - (2016) PloS one: Public Library of Science, 11 (7), pp. e0159357
  - Lattice Boltzmann Method of Multiphase Flow in Flip Chip Design - Advanced Packaging and SMT, SCHOOL OF MECHANICAL ENGINEERING ENGINEERING CAMPUS UNIVERSITI SAINS MALAYSIA
  - Lattice Boltzmann method study of bga bump arrangements on void formation - (2016) Microelectronics Reliability: Pergamon, 56, pp. 170-181
  - Lattice Boltzmann method study of effect three dimensional stacking-chip package layout on micro-void formation during encapsulation process - (2016) Microelectronics reliability: Pergamon, 65, pp. 205-216
  - Lattice Boltzmann model of 3D multiphase flow in artery bifurcation aneurysm problem - (2016) Computational and mathematical methods in medicine: Hindawi Publishing Corporation, 2016 (1), pp. 6143126
  - LDA Measurement on a Modified Cyclone - (1995) ASME Laser Anemometry, FED, 229, pp. 395-403
  - Lead-free solder SAC 305 Volume Reduction and Cold Slump after Stencil Printing Process - (2020) IOP Conference Series: Materials Science and Engineering: IOP Publishing, 852 (1), pp. 012084
  - LIFE CYCLE ASSESSMENT OF TOXICITY POTENTIAL OF METALLIC ELEMENTS AND PROCESS STAGES IN ELECTRONICS: A CASE STUDY OF ELECTRONIC CONNECTOR LEADS. - (2017) Environmental Engineering & Management Journal (EEMJ), 16 (7)
  - Lift performance of a cambered wing for aerodynamic performance enhancement of the flapping wing - (2015) Jurnal Teknologi, 75 (8)
  - Machine vision for crack inspection of biscuits featuring pyramid detection scheme - (2014) Journal of Food Engineering: Elsevier, 120, pp. 233-247
  - Mathematical modelling of flow and sediment pattern at Ijok Intake, Ijok River, Perak, Malaysia - (2012) International Journal of Modelling and Simulation: Taylor & Francis, 32 (3), pp. 165-170
  - Mechanical reliability of self-aligned chip assembly after reflow soldering process - (2020) Soldering & Surface Mount Technology, 33 (1), pp. 9-17
  - Microstructure and mechanical properties of Pb-free Sn–3.0 Ag–0.5 Cu solder pastes added with NiO nanoparticles after reflow soldering process - (2016) Materials & Design: Elsevier, 90, pp. 499-507
  - Microwave 3D imaging system featuring the phase coherence factor for improved beamforming - (2022) Current Medical Imaging Reviews: Bentham Science Publishers, 18 (9), pp. 939-951
  - Microwave 3D imaging system featuring the phase coherence factor for improved beamforming. - (2022) MDPI stays neutral with regard to jurisdictional claims in published maps and institutional affil-iations.
  - Modeling hormone-induced calcium oscillations in liver cell with membrane computing - (2012) Romanian Journal of Information Science and Technology, 15 (1), pp. 63-76
  - Modelling and analysis of the effect of stacking chips with TSVs in 3D IC package encapsulation process - (2012) Maejo International Journal of Science and Technology: Maejo University, 6 (2), pp. 159
  - Modified methods for assessing photovoltaic solar thermal collectors - (2021) Case Studies in Thermal Engineering: Elsevier, 28, pp. 101690
  - Modified methods for assessing photovoltaic solar thermal collectors. - (2021) Case Studies in Thermal Engineering, 28
  - Molded underfill (MUF) encapsulation for flip-chip package: A numerical investigation - (2017) AIP Conference Proceedings: AIP Publishing, 1865 (1)
  - Molecular dynamics simulation of the nano-reinforced lead-free solder at different reflow soldering process temperature - (2019) IOP Conference Series: Materials Science and Engineering: IOP Publishing, 701 (1), pp. 012014
  - Multi-class colour inspection of baked foods featuring support vector machine and Wilk’s λ analysis - (2010) Journal of food engineering: Elsevier, 101 (4), pp. 370-380
  - Multiphase flow in solder paste stencil printing process using CFD approach - (2018) Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 46 (1), pp. 147-152
  - Nanofluid-filled heat pipes in managing the temperature of EV lithium-ion batteries - (2019) Journal of Physics: Conference Series: IOP Publishing, 1349 (1), pp. 012123
  - No-flow underfill: Effect of chip placement speed on the void formation using numerical method - (2021) Microelectronics Journal: Elsevier, 114, pp. 105139
  - Novel Technique for Improving the Amperometric Resolution in DNA Separation Biochip - (2016) Sensor Letters: American Scientific Publishers, 14 (8), pp. 780-785
  - Numerical analysis of nozzle flow and spray characteristics from different nozzles using diesel and biofuel blends - (2019) Energies: MDPI, 12 (2), pp. 281
  - Numerical analysis on the effects of different inlet gates and gap heights in TQFP encapsulation process - (2011) International Journal of Heat and Mass Transfer: Pergamon, 54 (9-10), pp. 1861-1870
  - Numerical and experimental investigations of passive flow control devices on a backward facing step - (2009) International Journal of Engineering and Technology, 6 (2), pp. 21-29
  - Numerical and experimental investigations of speaker-driven synthetic jet actuator for electronics cooling applications - (2019) Heat Transfer Research: Begel House Inc., 50 (14)
  - Numerical and experimental investigations on effect of fan height on the performance of piezoelectric fan in microelectronic cooling - (2009) International Communications in Heat and Mass Transfer: Pergamon, 36 (1), pp. 51-58
  - Numerical assessment on heat transfer performance of double-layered oblique fins micro-channel heat sink with Al2O3 nanofluid - (2022) Thermal Science, 26 (1 Part B), pp. 477-488
  - Numerical investigation on rheology models during encapsulation of moulded underfill (MUF) for flip-chip package - (2024) Polymer Bulletin: Springer Berlin Heidelberg, 81 (3), pp. 2385-2406
  - Numerical investigation on the effect of injection pressure on melt front pressure and velocity drop - (2015) Applied Mechanics and Materials: Trans Tech Publications Ltd, 786, pp. 210-214
  - Numerical investigation on the effect of pressure and temperature on the melt filling during injection molding process - (2016) Arabian Journal for Science and Engineering: Springer Berlin Heidelberg, 41, pp. 1907-1919
  - Numerical Investigation on the Effect of Squeegee Angle during Stencil Printing Process - (2018) Journal of Physics: Conference Series: IOP Publishing, 1082 (1), pp. 012057
  - Numerical Investigations of Flow Field Structure Induced by Sub-Boundary Layer Vortex Generators(SBVG) - (2010) International Review of Aerospace Engineering: Praise Worthy Prize, FEDERICO II University 21 Claudio Naples I 80125 Italy, 3 (1), pp. 27-34
  - Numerical Investigations of Membrane Surface Effects on NACA 643- 218 Airfoil - (2014) Applied Mechanics and Materials: Trans Tech Publications Ltd, 564, pp. 60-65
  - Numerical investigations on the effects of different cooling periods in reflow-soldering process - (2015) Heat and mass transfer: Springer Berlin Heidelberg, 51, pp. 1413-1423
  - Numerical modeling and analysis of microbump pitch effect in 3d IC package with TSV during molded underfill (MUF) - (2013) Engineering Applications of Computational Fluid Mechanics: Taylor & Francis, 7 (2), pp. 210-222
  - Numerical simulation of self-alignment of chip resistor components for different silver content during reflow soldering - (2017) Microelectronics Reliability: Pergamon, 79, pp. 69-78
  - Numerical simulation of thermal fluid-structure interaction on flexible PCB in reflow soldering atmosphere - (2019) AIP Conference Proceedings: AIP Publishing, 2129 (1)
  - Numerical study of heat transfer characteristics of laminar nanofluids flow in oblique finned microchannel heat sink: effects of different base fluids and volume fraction of nanoparticles - (2020) Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 76 (3), pp. 25-37
  - Numerical Study of Heat Transfer Enhancement Using Al2O3–Graphene/Water Hybrid Nanofluid Flow in Mini Tubes - (2019) Iranian Journal of Science and Technology, Transactions A: Science: Springer International Publishing, 43, pp. 1989-2000
  - Numerical study of inspiratory and expiratory flow in a human nasal cavity - (2011) Journal of Medical and Biological Engineering: Biomedical Engineering Society, 31 (3), pp. 201-206
  - Numerical Study of Mold Filling during Encapsulation Process - (2015) Applied Mechanics and Materials: Trans Tech Publications Ltd, 786, pp. 318-322
  - Numerical study on hydrodynamic performance of shallow underwater glider platform - (2012) NISCAIR-CSIR, India
  - NUMERICAL STUDY ON THE EFFECT OF DIFFERENT VISCOMETER TEST ON STENCIL PRINTING PROCESS - (2022) Jurnal Teknologi, 84 (6-2), pp. 135-143
  - Numerical study on the influence of nozzle spray shape on spray characteristics using diesel and biofuel blends - (2021) Biofuels: Taylor & Francis, 12 (9), pp. 1109-1121
  - Optimization modeling of the cooling stage of reflow soldering process for ball grid array package using the gray-based Taguchi method - (2012) Microelectronics Reliability: Pergamon, 52 (6), pp. 1143-1152
  - Optimization of 3D IC stacking chip on molded encapsulation process: a response surface methodology approach - (2019) The International Journal of Advanced Manufacturing Technology: Springer London, 103, pp. 1139-1153
  - Optimization of aerodynamic efficiency for twist morphing MAV wing - (2014) Chinese Journal of Aeronautics: Elsevier, 27 (3), pp. 475-487
  - Optimization of flexible printed circuit board electronics in the flow environment using response surface methodology - (2013) Microelectronics Reliability: Pergamon, 53 (12), pp. 1996-2004
  - Optimization of flexible printed circuit board’s cooling with air flow and thermal effects using response surface methodology - (2021) Microelectronics International: Emerald Publishing Limited, 38 (4), pp. 182-205
  - Optimization of IC encapsulation considering fluid/structure interaction using response surface methodology - (2012) Simulation modeling practice and theory: Elsevier, 29, pp. 109-122
  - Optimization of operating conditions of heat pipes BTMS using response surface method - (2018) AIP Conference Proceedings: AIP Publishing, 2020 (1)
  - Optimization of pin through hole connector in thermal fluid–structure interaction analysis of wave soldering process using response surface methodology - (2015) Simulation Modelling Practice and Theory: Elsevier, 57, pp. 45-57
  - Optimization of SiO2 nanoparticle mass concentration and heat input on a loop heat pipe - (2015) Case Studies in Thermal Engineering: Elsevier, 6, pp. 238-250
  - Optimization of the reflow soldering process with multiple quality characteristics in ball grid array packaging by using the grey‐based Taguchi method - "(2013) Microelectronics International: Emerald Group Publishing Limited, 30 (3), pp. 151-168"
  - Optimum tip gap and orientation of multi-piezofan for heat transfer enhancement of finned heat sink in microelectronic cooling - (2012) International Journal of Heat and Mass Transfer: Pergamon, 55 (21-22), pp. 5514-5525
  - Oxygen Uptake by Biological Processes Inside Oxidation Ditch - (2015) Applied Mechanics and Materials: Trans Tech Publications Ltd, 802, pp. 490-495
  - Packaging Technologies - (2012) IEEE, pp. 537 - 538
  - Peltier cooling device (PCD): assembly and configuration of the device for reducing temperature of building spaces - (2015) Advances in Environmental Biology: American-Eurasian Network for Scientific Information, pp. 104-108
  - PENCIRIAN TEMPORAL SKALA KECIL AIR SISA DOMESTIK PERBANDARAN: SMALL SCALE TEMPORAL CHARACTERISATION OF URBAN DOMESTIC WASTEWATER - (2021) Jurnal Teknologi, 83 (5), pp. 35-44
  - Pengawalan Pertumbuhan Sebatian antara Logam Sambungan Pateri-Papan Litar Bercetak Menggunakan Salutan Nikel - (2018) Sains Malaysiana, 47 (9), pp. 2157-2162
  - Performance assessment of a photovoltaic module enhancer: insight into a new lifespan and cost effectiveness factor - (2024) International Journal of Low-Carbon Technologies: Oxford University Press, 19, pp. 257-267
  - Performance of functionalized MWCNT–water nanofluids for heat transfer applications - (2020) Arabian Journal for Science and Engineering: Springer Berlin Heidelberg, 45, pp. 5603-5614
  - Performance, combustion characteristics and economics analysis of a combined thermoelectric and thermophotovoltaic power system - (2021) Applied Thermal Engineering: Pergamon, 193, pp. 117051
  - Physical, mechanical, and thermal properties improvement of porous alumina substrate through dip-coating and re-sintering procedures - (2016) Ceramics International: Elsevier, 42 (6), pp. 7717-7729
  - Piezoresistive effects in controllable defective HFTCVD graphene-based flexible pressure sensor - (2015) Scientific reports: Nature Publishing Group UK, 5 (1), pp. 14751
  - Plant based energy potential and biomass utilization in Malaysia - (2000) International Energy Journal, 1 (2)
  - Plastic ball grid array encapsulation process simulation on rheology effect - (2011) TELKOMNIKA (Telecommunication Computing Electronics and Control), 9 (1), pp. 27-36
  - Prediction of the void formation in no-flow underfill process using machine learning-based algorithm - (2022) Microelectronics Reliability: Pergamon, 135, pp. 114586
  - Preparation And Characterization Of Carbon Doped Lithium Iron Phosphate Composite As Cathode For Rechargable Battery - (2019) Journal of Ovonic Research Vol, 15 (3), pp. 199-204
  - Preparation and structural characterization of template assisted electrodeposited copper nanowires - (2014) International Journal of Electrochemical Science: Elsevier, 9 (5), pp. 2548-2555
  - QUAD FLAT NO-LEAD PACKAGE WITH DIFFERENT THERMAL PROFILES AND SOLDER PAD FINISHING FOR VOID MINIMIZATION - (2022) Jurnal Teknologi, 84 (6-2), pp. 65-75
  - QUALITY IMPROVEMENT OF SAGO (METROXYLON SAGU) STARCH PROCESSING. - (2001) Sago palm, 9 (2), pp. 25
  - Quantitative algorithm and computer architecture for real-time image reconstruction in process tomography - (1992) Proc. of the 1^< th> Meeting on European Concerted Action on Process Tomography, pp. 179-192
  - Quantitative imaging in the time domain featuring gradient based minimization and broyden updating - (2011) IEEE microwave and wireless components letters: IEEE, 21 (11), pp. 628-630
  - Reflow optimization process: thermal stress using numerical analysis and intermetallic spallation in backwards compatibility solder joints - (2015) Arabian Journal for Science and Engineering: Springer Berlin Heidelberg, 40, pp. 1669-1679
  - Regional segregation with spatial considerations-based analytical filling time model for non-Newtonian power-law underfill fluid in flip-chip encapsulation - (2019) Journal of Electronic Packaging: American Society of Mechanical Engineers, 141 (4), pp. 041009
  - Remote Lab Generator (RLGen): A Software Tool Using Auto-Generating Technique to Develop a Remote Lab. - (2007) International Journal of Online Engineering, 3 (4)
  - Remote lab generator: A software tool for lab lecturer - (2007) ICEEI2007
  - Research from University Sains Malaysia Broadens Understanding of Nanofluids (Effect of TiO2-Al2O3 nanoparticle mixing ratio on the thermal conductivity, rheological properties, and dynamic viscosity of water-based hybrid nanofluid). - (2020) Nanotechnology Weekly: NewsRX LLC, pp. 1817-1817
  - Resistivity mapping of slurry processes - (1994) Process Tomography: A Strategy for Industrial Exploitation: University of Manchester Institute of Science and Technology (UMIST), pp. 155-57
  - Revolutionizing photovoltaic excellence: Unveiling a cutting-edge approach to assessing module enhancers for optimal area and cost efficiency - (2024) Case Studies in Thermal Engineering: Elsevier, 55, pp. 104139
  - Rice moisture imaging using electromagnetic measurement technique - (2003) Food and bioproducts processing: Elsevier, 81 (3), pp. 159-169
  - SAC105 Stencil printing process using cross viscosity model - (2019) Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 54 (1), pp. 70-77
  - Scaling effect on velocity profiles in capillary underfill flow - (2017) IOP Conference Series: Materials Science and Engineering: IOP Publishing, 203 (1), pp. 012013
  - Selected water thermal properties from molecular dynamics for engineering purposes - (2021) Journal of Molecular Liquids: Elsevier, 324, pp. 114703
  - Shape and weight grading of mangoes using visible imaging - (2015) Computers and Electronics in Agriculture: Elsevier, 115, pp. 51-56
  - Shape Classification of Harumanis Mango using Discriminant Analysis (DA) and Support Vector Machine (SVM) - (2014) Journal of Engineering and Technology (JET), 5 (2), pp. 93-104
  - Simulation investigations on fluid/structure interaction in the reflow soldering process of board-level BGA packaging - (2013) International Journal of Computer Theory and Engineering: IACSIT Press, 5 (4), pp. 645
  - Simulation Study on the Production of Nano-sized Materials at Mixing Stage - (2014) Advanced Materials Research: Trans Tech Publications Ltd, 832, pp. 118-123
  - SOLDERING CHARACTERISTICS AND THERMO-MECHANICAL PROPERTIES OF Pb-FREE SOLDER PASTE FOR REFLOW SOLDERING - (2019) Journal of Advanced Manufacturing Technology (JAMT), 13 (2)
  - Stability, thermal conductivity and rheological properties of graphene and MWCNT in nanolubricant using additive surfactants - (2021) Case Studies in Thermal Engineering: Elsevier, 28, pp. 101607
  - Standardization of Malaysian adult female nasal cavity - (2023) Computational and mathematical methods in medicine: Hindawi Publishing Corporation, 2013 (1), pp. 519071
  - Stencil printing process performance on various aperture size and optimization for lead-free solder paste - (2019) The International Journal of Advanced Manufacturing Technology: Springer London, 102, pp. 3369-3379
  - Stepwise discriminant analysis for colour grading of oil palm using machine vision system - (2001) Food and bioproducts processing: Elsevier, 79 (4), pp. 223-231
  - Strength analysis for designing a bicycle transmission system without chain - (2020) IOP Conference Series: Materials Science and Engineering: IOP Publishing, 1007 (1), pp. 012168
  - Structural and electrochemical properties of P3-Na0. 67Mn0. 3Co0. 7O2 nanostructures prepared by citric-urea self-combustion route as cathode for sodium ion battery - (2019) Digest journal of nanomaterials and biostructures, 14 (4), pp. 1179-1193
  - Studing Effect of Temperature on Some Mechanical Properties of Single And Hybrid Composites - (2011) Ibn AL-Haitham Journal For Pure and Applied Sciences, 24 (2)
  - Study of different dispensing patterns of No-flow underfill using numerical and experimental methods - (2021) Journal of Electronic Packaging: American Society of Mechanical Engineers, 143 (3), pp. 031005
  - Study of flow visualization in stacked-chip scale packages (S-CSP) - (2007) International Communications in Heat and Mass Transfer: Pergamon, 34 (7), pp. 820-828
  - Study of the effect of variation of zirconium content and ageing through precipitation hardening process on mechanical properties of aluminum alloys (Al-Zr) - (2023) AIP Conference Proceedings: AIP Publishing, 2680 (1)
  - Study of velocity profiles of orbal biological system (OBS) using computational fluid dynamics (CFD) - (2019) Journal of Computational Methods in Sciences and Engineering: IOS Press, 19 (2), pp. 447-454
  - Study on convective heat transfer and pressure drop of MWCNTs/water nanofluid in mini-tube - (2019) Journal of Thermal Analysis and Calorimetry: Springer International Publishing, 135, pp. 123-132
  - STUDY ON THE EFFECT OF NUMBER OF FILM COOLING ROWS ON THE THERMAL PERFORMANCE OF GAS TURBINE BLADE. - (2012) Journal of Thermal Science & Technology/Isı Bilimi ve Tekniği Dergisi, 32 (2)
  - Study on the effect of stack thickness during encapsulation of stacked-chip scale packages (S-CSP) - (2008) Journal of microelectronics and electronic packaging: International Microelectronics Assembly and Packaging Society Collection, 5 (2), pp. 62-67
  - Study on the fluid-structure interaction of flexible printed circuit board motherboard in personal computer casings - "(2013) Microelectronics International: Emerald Group Publishing Limited, 30 (3), pp. 138-150"
  - Study on the fluid/structure interaction at different inlet pressures in molded packaging - (2011) Microelectronic Engineering: Elsevier, 88 (10), pp. 3182-3194
  - Study on the fluid–structure interaction at different layout of stacked chip in molded packaging - (2017) Arabian Journal for Science and Engineering: Springer Berlin Heidelberg, 42, pp. 4743-4757
  - Study on the fluid–structure interaction of flexible printed circuit board electronics in the flow environment - (2012) IEEE Transactions on Components, Packaging and Manufacturing Technology: IEEE, 2 (8), pp. 1335-1345
  - Support vector machine approach to real-time inspection of biscuits on moving conveyor belt - (2011) Computers and Electronics in Agriculture: Elsevier, 75 (1), pp. 147-158
  - Symmetrical unit-cell numerical approach for flip-chip underfill flow simulation - (2020) CFD Letters, 12 (8), pp. 55-63
  - Synthetic jet cooling diaphragm equation of motion characteristic and verification for computational fluid dynamic modelling - "(2018) AIP Conference Proceedings: AIP Publishing, 1974 (1)"
  - Temperature prediction on flexible printed circuit board in reflow oven soldering for motherboard application - (2019) IOP Conference Series: Materials Science and Engineering: IOP Publishing, 530 (1), pp. 012019
  - The applications of computer vision system and tomographic radar imaging for assessing physical properties of food - (2004) Journal of food engineering: Elsevier, 61 (1), pp. 125-135
  - The comparison between water models in predicting water thermal and dynamic properties from molecular dynamics - (2020) Int. J. Sci. Technol. Res, 9 (8)
  - The developing plane channel flow over water-repellent surface containing transverse grooves and ribs - "(2018) Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 45 (1), pp. 141-148"
  - The development and performance analysis of partially premixed LPG porous medium combustor - (2011) Energy Sources, Part A: Recovery, Utilization, and Environmental Effects: Taylor & Francis Group, 33 (13), pp. 1260-1270
  - The effect of freestream flow velocities on the flexible printed circuit board with different BGA package arrangements - (2017) Arabian Journal for Science and Engineering: Springer Berlin Heidelberg, 42 (5), pp. 2075-2086
  - The Effect of Morphing Force on Aerodynamic Performances of TM Wing - (2014) Advanced Materials Research: Trans Tech Publications Ltd, 980, pp. 102-106
  - The effect of sintering conditions on the microstructure and electrical properties of Pb (Zr0. 52Ti0. 48) O3 ceramic - (2014) Journal of Mechanical Engineering and Sciences, 6, pp. 901-906
  - The effect of turbulence intensity on the aerodynamic performance of airfoils - (2001) 4th International Conference on Mechanical Engineering, pp. 31-36
  - The effects of turbulence intensity on the performance characteristics of naca 0015 and eagle 150 airfoils - (2002) Proc. NSF Seminar
  - The heat transfer performance of gold/water nanofluid flows in minitube using thermal lattice Boltzmann method - (2016) Pertanika J. Sci. Technol, 24
  - The relationships between harvest index, grain yield and biomass in rice - (1994) MARDI Res J, pp. 29-34
  - Thermal Analysis of a Cylindrical Sintered Wick Heat Pipe - (2019) Advanced Engineering for Processes and Technologies: Springer International Publishing, pp. 307-319
  - Thermal analysis of dual piezoelectric fans for cooling multi-LED packages - (2014) Microelectronics Reliability: Pergamon, 54 (8), pp. 1534-1543
  - Thermal contact resistance for hard and soft mating materials in a vacuum environment - (2006) 17th International Symposium on Transport Phenomena
  - Thermal Effect in Underfill Encapsulation of Ball Grid Array - (2016) Global Journal of Researches in Engineering: Electrical and Electronics En, 16 (7)
  - Thermal fluid-structure interaction in the effects of pin-through-hole diameter during wave soldering - (2014) Advances in Mechanical Engineering: SAGE Publications, 6, pp. 275735
  - Thermal fluid-structure interaction of PCB configurations during the wave soldering process - (2015) Soldering & Surface Mount Technology: Emerald Group Publishing Limited, 27 (1), pp. 31-44
  - Thermal Impact of Heat Spreader Co-Planarity to Electronic Packaging - (2020) Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 71 (1), pp. 1-9
  - Thermal performance of a cylindrical heat pipe for different heat inputs and inclination angles - (2014) Applied Mechanics and Materials: Trans Tech Publications Ltd, 661, pp. 148-153
  - THERMAL PROPERTIES OF PARAFFIN/NANO-MAGNETITETREVORITE PHASE CHANGE MATERIALS - (2018) Journal of Ovonic Research, 14 (5)
  - Thermophysical properties of Al2O3-CuO hybrid nanofluid at different nanoparticle mixture ratio: An experimental approach - (2020) Journal of Molecular Liquids: Elsevier, 313, pp. 113458
  - Thermophysical Properties of Vegetable Oil-Based Hybrid Nanofluids Containing Al2O3-TiO2 Nanoparticles as Insulation Oil for Power Transformers - (2022) Nanomaterials: MDPI, 12 (20), pp. 3621
  - Thermophysical properties of water/EG based hybrid nanofluid containing CuO-Al2O3 nanoparticles - (2024) AIP Conference Proceedings: AIP Publishing, 2750 (1)
  - Three dimensional CFD conjugate analysis of two inline PLCC packages horizontally mounted - (2004) Journal of microelectronics and electronic packaging: International Microelectronics Assembly and Packaging Society Collection, 1 (4), pp. 244-260
  - Three Dimensional Simulation of Filling Process for Stacked-Chip Scale Packages - (2019) Advanced Engineering for Processes and Technologies: Springer International Publishing, pp. 1-11
  - Three-dimensional CFD simulation of the stencil printing performance of solder paste - (2020) The International Journal of Advanced Manufacturing Technology: Springer London, 108, pp. 3351-3359
  - Three-dimensional modeling of mold filling in microchip encapsulation process with a matrix-array arrangement - (2010) 132 (1), pp. 014502
  - Three-dimensional modelling to study the effect of die-stacking shape on mould filling during encapsulation of microelectronic chips - (2010) IEEE transactions on advanced packaging: IEEE, 33 (2), pp. 438-446
  - Three-dimensional numerical and experimental investigations on polymer rheology in meso-scale injection molding - (2010) International Communications in Heat and Mass Transfer: Pergamon, 37 (2), pp. 131-139
  - Three‐dimensional thermal investigations at board level in a reflow oven using thermal‐coupling method - (2012) Soldering & Surface Mount Technology: Emerald Group Publishing Limited, 24 (3), pp. 167-182
  - Time-domain reconstruction using sensitivity coefficients for limited view ultrawide band tomography - (2007) Review of Scientific Instruments: AIP Publishing, 78 (8)
  - Transient natural convection in a rectangular cavity filled with porous medium heated discretely at vertical wall - (2011) Journal of Engineering Science, 7 (1), pp. 1-13
  - Two-dimensional analysis of tandem/staggered airfoils using computational fluid dynamics - (2005) International Journal of Mechanical Engineering Education: SAGE Publications, 33 (3), pp. 195-207
  - Underfill process for two parallel plates and flip chip packaging - (2012) International communications in heat and mass transfer: Pergamon, 39 (8), pp. 1205-1212
  - Unimodal thresholding for Laplacian-based Canny–Deriche filter - (2012) Pattern Recognition Letters: North-Holland, 33 (10), pp. 1269-1286
  - Unsteady Pressure Distribution of a Flapping Wing Undergoing Root Flapping Motion with Elbow Joint at Different Reduced Frequencies - (2017) International Review of Aerospace Engineering (I.RE.AS.E): Praise Worthy Prize, 10 (3), pp. 105-113
  - Utilization of STMS markers to verify admixture in clonal progenies of Acacia mapping populations and relabelling using assignment tests. - (2015) 61 (5), pp. 200-209
  - Validation of three dimensional film cooling modeling on convex surface for gas turbine blade - (2012) International communications in heat and mass transfer: Pergamon, 39 (6), pp. 830-837
  - Viability of biomass fueled steam turbine cogeneration with power export for an Asian plywood industry - (2009) Energy Exploration & Exploitation: SAGE Publications, 27 (3), pp. 213-224
  - Viscosity and rheological behavior of Al2O3-Fe2O3/water-EG based hybrid nanofluid: a new correlation based on mixture ratio - (2023) Journal of Molecular Liquids: Elsevier, 375, pp. 121365
  - Viscosity of mono vs hybrid nanofluids: Measurement and comparison - (2020) IOP Conference Series: Materials Science and Engineering: IOP Publishing, 852 (1), pp. 012086
  - Visualization of fluid/structure interaction in IC encapsulation - (2012) IEEE Transactions on Components, Packaging and Manufacturing Technology: IEEE, 2 (8), pp. 1239-1246
  - Visualization of Underfill Flow in Ball Grid Array (BGA) using Particle Image Velocimetry (PIV) - (2018) IOP Conference Series: Materials Science and Engineering: IOP Publishing, 370 (1), pp. 012064
- Book
  - Materials Science & Engineering A - (2016) Elsevier
- Book Chapter
  - A Key Comparative Study Between a Self-Aspirated and an Air-Induced Porous Medium Burner - (2022) Progress in Engineering Technology IV: Springer International Publishing, pp. 273-281
  - Antenna design for ultra-wideband (UWB) electromagnetic tomography - (2007) Proceedings of the 5th World Congress on Industrial Process Tomography
  - Application of geophysical methods for quantitative archaeological investigations - (1996) SEG Technical Program Expanded Abstracts 1996: Society of Exploration Geophysicists, pp. 770-773
  - Applications of porous media combustion technology - (2014) The Role of Colloidal Systems in Environmental Protection: Elsevier, pp. 615-633
  - Effect of Needle Size and Needle Height to Substrate in Encapsulation Process of LED Packaging - (2022) Advanced Materials and Engineering Technologies: Springer International Publishing, pp. 149-156
  - Performance Analysis of a Coated Porous Medium Burner for Cogeneration - (2022) Progress in Engineering Technology IV: Springer International Publishing, pp. 91-98
  - Quality evaluation of bakery products - (2016) Computer vision technology for food quality evaluation: Academic Press, pp. 525-589
  - Solder Paste’s Rheology Data for Stencil Printing Numerical Investigations - (2022) Recent Progress in Lead-Free Solder Technology: Materials Development, Processing and Performances: Springer International Publishing, pp. 299-310
  - Ultra wide band imaging of dielectric in the time domain using sensitivity coefficient based reconstruction - (2007) Proceedings of the 5th World Congress on Industrial Process Tomography
- Conference Paper
  - A Case Study on a Real-Time High-Resolution Formation Evaluation with Deep Transient Testing on Thinly Bedded Reservoirs in Exploration Well: A Net Zero Carbon Emission Well Test Testing Operation - (2024) International Petroleum Technology Conference: IPTC, pp. D031S092R001
  - A novel technique for multiple targets detection in through-the-wall radar imaging - (2015) 2015 International Conference on Science and Technology (TICST): IEEE, pp. 70-75
  - A robust crack detection method for non-uniform distributions of coloured and textured image - (2011) 2011 IEEE International Conference on Imaging Systems and Techniques: IEEE, pp. 98-103
  - Advanced Wireline Log Acquisition and Innovative Data Processing, Along with an Integrated Petrophysical Methodology, Unleash the Full Potential Of Cycle II/III Reservoir Offshore Sarawak - (2024) International Petroleum Technology Conference: IPTC, pp. D021S078R004
  - Application of Computational Fluid Dynamics (CFD) in Physical Model of Pump Sump to Predict the Flow Characteristics - (2008) Int Conf on Construction and Bldg Tech (ICCBT-2008), pp. 79-90
  - Bio-inspired vision fusion for quality assessment of harumanis mangoes - (2012) 2012 Third International Conference on Intelligent Systems Modelling and Simulation: IEEE, pp. 317-324
  - CAD-based 3D grain burnback analysis for solid rocket motors - (2020) Proceedings of International Conference of Aerospace and Mechanical Engineering 2019: AeroMech 2019, 20–21 November 2019, Universiti Sains Malaysia, Malaysia: Springer Singapore, pp. 341-348
  - Compact and wideband wide-slot antenna for microwave imaging system - (2011) 2011 IEEE International RF & Microwave Conference: IEEE, pp. 63-66
  - Comparing image reconstruction algorithms for microwave camera featuring ultra wide band sensor - (2011) 2011 IEEE International Conference on Imaging Systems and Techniques: IEEE, pp. 112-117
  - Computational fluid dynamics study of middle turbinectomy - (2012) 2012 International Conference on Biomedical Engineering (ICoBE): IEEE, pp. 338-341
  - Design of DNA biosensors and amperometric microchips featuring copper electrodes - (2012) Proceedings of 2012 IEEE-EMBS International Conference on Biomedical and Health Informatics: IEEE, pp. 1005-1008
  - Detection of Micro-Crack defect on Eggshel by Means of Candle Lighting and Improved Anistropic Diffusion Filtering - "(2015) Proceedings of the 8th AUN/SEED-Net RCEEE 2015 and 11th ERDT Conference on Semiconductor and Electronics, Information and Communications Technology, and Energy: Electrical and Electronics Engineering Institute, College of Engineering, University of the Philippines Diliman, Engineering Research and Development for Technology, and ASEAN University Network/Southeast Asia Engineering Education Development Network (AUN/SEED-Net), pp. 22-28"
  - Edible bird nest shape quality assessment using machine vision system - (2012) 2012 Third International Conference on Intelligent Systems Modelling and Simulation: IEEE, PP. 325-329
  - Effect of gold concentration through a single dynamic wave soldering process - (2012) 2012 14th International Conference on Electronic Materials and Packaging (EMAP): IEEE, pp. 1-9
  - Effect of piezoelectric fan height on flow and heat transfer for electronics cooling applications - (2008) 2008 International Conference on Electronic Materials and Packaging: IEEE, pp. 165-170
  - Effect of stacking chips and fluid/structure interaction simulation in 3D stacked flip-chip encapsulation process - (2012) 2012 7th International Microsystems, Packaging, Assembly and Circuits Technology Conference (IMPACT): IEEE, pp. 127-132
  - Energy productivity of some plantation crops in Malaysia and the status of bioenergy utilisation - (2000) World renewable energy congress '99, Kuala Lumpur (Malaysia), 8-11 Jun 1999; Other Information: 29 refs; PBD: 2000; Related Information: In: Proceedings of World Renewable Energy Congress '99, pp. 37-45
  - Evaluation and characterization of advanced rice mutant line of rice (Oryza sativa), MR219-4 and MR219-9 under drought condition - (2012) R and D Seminar 2012: Research and Development Seminar 2012; Bangi (Malaysia): International Nuclear Information System
  - Experimental ultra wide band imaging using heterogeneously dense breast phantom for early cancer detection - (2012) 2012 IEEE International Conference on Imaging Systems and Techniques Proceedings: IEEE, pp. 130-135
  - Food handling and packaging using computer vision and robot - (2004) Proceedings. International Conference on Computer Graphics, Imaging and Visualization, 2004. CGIV 2004: IEEE, pp. 177-182
  - High-speed micro-crack detection of solar wafers with variable thickness - (2014) 2014 IEEE International Conference on Imaging Systems and Techniques (IST) Proceedings: IEEE, pp. 237-241
  - Microstrip-fed low profile and wideband wide-slot antenna for breast imaging - (2012) 2012 Asia Pacific Microwave Conference Proceedings: IEEE, pp. 926-928
  - Microwave imaging at resolution and super-resolution with ultra-wide band sensors - (2012) 2012 IEEE International Conference on Imaging Systems and Techniques Proceedings: IEEE, pp. 538-543
  - Natural convection of discrete heating in a cavity filled by porous media for different aspect ratio - (2007) 2007 International Conference on Electronic Materials and Packaging: IEEE, pp. 1-11
  - Observation of hydrocyclone separator dynamics using resistive electrical impedance tomography - (1994) Process Tomography: A Strategy for Industrial Exploitation: University of Manchester Institute of Science and Technology (UMIST), pp. 5-8
  - Real-time implementation of fractal image compression in low cost FPGA - (2016) 2016 IEEE International Conference on Imaging Systems and Techniques (IST): IEEE, pp. 13-18
  - Synthetic Jet Study on Resonance Driving Frequency for Electronic Cooling - (2018) Regional Conference on Science, Technology and Social Sciences (RCSTSS 2016) Theoretical and Applied Sciences: Springer Singapore, pp. 435-443
  - Three dimensional CFD simulation of non-Newtonian flow for the underfill flow in flip chip packaging - "(2010) Proceedings of ICFD 10: Tenth International Congress of Fluid Dynamics December 16-19, 2010, Stella Di Mare Sea Club Hotel, Ain Soukhna, Red Sea, Egypt "
  - Three dimensional numerical prediction of epoxy flow during the underfill process in flip chip packaging - (2012) 2012 35th IEEE/CPMT International Electronics Manufacturing Technology Conference (IEMT): IEEE, pp. 1-6
  - Three dimensional through-the-wall imaging using ultrawideband (UWB) sensors with enhanced delay-and-sum algorithm - (2014) The 8th International Conference on Robotic, Vision, Signal Processing & Power Applications: Innovation Excellence Towards Humanistic Technology: Springer Singapore, pp. 419-425
  - Three-Dimensional Mold Flow in Stacked-Chip Scale Packages (S-CSP) - (2006) 2006 Thirty-First IEEE/CPMT International Electronics Manufacturing Technology Symposium: IEEE, pp. 135-142
  - Through-the-wall human sensing based on change detection - (2015) 2015 IEEE International Conference on Imaging Systems and Techniques (IST): IEEE, pp. 1-5
  - Towards buildings energy management: using seasonal schedules under time of use pricing tariff via deep neuro-fuzzy optimizer - (2019) 2019 15th international wireless communications & mobile computing conference (IWCMC): IEEE, pp. 1594-1599
  - Wide-slot antenna for breast imaging applications - (2014) 2014 IEEE Sensors Applications Symposium (SAS): IEEE, pp. 1-5
- Report
  - Effect of Using Piezoelectric Fans on Cooling of Microelectronic Systems - (2011) Universiti Sains Malaysia
  - SHORT TERM GRANT REPORT ON EXPERIMENTAL INVESTIGATION AND NUMERICAL METHOD OF THERMAL CONTACT RESISTANCE FOR HARD AND SOFT MATERIALS - SCHOOL OF MECHANICAL ENGINEERING ENGINEERING CAMPUS UNIVERSITI SAINS MALAYSIA
- Review
  - A Brief Survey of Preparation and Heat Transfer Enhancement of Hybrid Nanofluids. - (2019) Journal of Mechanical Engineering/Strojniški Vestnik, 65
  - A practical approach in porous medium combustion for domestic application: A review - (2018) IOP Conference Series: Materials Science and Engineering: IOP Publishing, 370 (1), pp. 012004
  - A review of combustion-driven thermoelectric (TE) and thermophotovoltaic (TPV) power systems - (2017) Renewable and Sustainable Energy Reviews: Pergamon, 71, pp. 572-584
  - A Review of Experimentation of Synthetic Jet Cooling - (2023) Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 109 (2), pp. 27-38
  - A review of investigations on liquid fuel combustion in porous inert media - (2009) Progress in Energy and Combustion Science: Pergamon, 35 (2), pp. 216-230
  - A Review of Moldflow and Finite Element Analysis Simulation of Chip Scale Packaging (CSP) for Light Emitting Diode (LED) - (2022) Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 99 (1), pp. 158-173
  - Applications of porous media combustion technology–a review - (2009) Applied energy: Elsevier, 86 (9), pp. 1365-1375
  - Combustion in porous media and its applications–A comprehensive survey - (2009) Journal of environmental management: Academic Press, 90 (8), pp. 2287-2312
  - Corrigendum to “Combustion in porous media and its applications–A comprehensive survey”[Journal of Environmental Management 90 (2009) 2287–2312] - (2009) Journal of Environmental Management: Academic Press, 91 (2), pp. 550-550
  - Cutting-edge developments in active and passive photovoltaic cooling for reduced temperature operation - (2024) Results in Engineering: Elsevier, pp. 102662
  - Design optimization of solid rocket propulsion: a survey of recent advancements - (2020) Journal of Spacecraft and Rockets: American Institute of Aeronautics and Astronautics, 57 (1), pp. 3-11
  - Die attachment, wire bonding, and encapsulation process in LED packaging: A review - (2021) Sensors and Actuators A: Physical: Elsevier, 329, pp. 112817
  - Effects of blade number on the centrifugal pump performance: a review - (2022) Arabian Journal for Science and Engineering: Springer Berlin Heidelberg, 47 (7), pp. 7945-7961
  - Irreversible bonding techniques for the fabrication of a leakage-free printed circuit board-based lab-on-chip in microfluidic platforms—a review - (2021) Measurement Science and Technology: IOP Publishing, 32 (5), pp. 052001
  - Metal oxide nanofluids in electronic cooling: a review - (2020) Journal of Materials Science: Materials in Electronics: Springer US, 31 (6), pp. 4381-4398
  - Overview of the important factors influencing the performance of eco-friendly brake pads - (2022) Polymers: MDPI, 14 (6), pp. 1180
  - Recent advances on thermally conductive adhesive in electronic packaging: a review - (2021) Polymers: MDPI, 13 (19), pp. 3337
  - Recent fluid–structure interaction modeling challenges in IC encapsulation–A review - (2014) Microelectronics Reliability: Pergamon, 54 (8), pp. 1511-1526
  - Single-phase heat transfer enhancement in micro/minichannels using nanofluids: theory and applications - (2016) Applied energy: Elsevier, 164, pp. 733-755
  - Study on the addition of nanoparticles in the lead-free solder during reflow soldering via numerical simulation-a review - (2020) CFD Letters, 12 (5), pp.111-119
  - Thermo-mechanical challenges of reflowed lead-free solder joints in surface mount components: a review - (2016) Soldering & Surface Mount Technology: Emerald Group Publishing Limited, 28 (2), pp. 41-62
  - Trends in modeling of porous media combustion - (2010) Progress in Energy and Combustion science: Pergamon, 36 (6), pp. 627-650
- Thesis
  - Aerodynamic performances of twist morphing MAV wing - (2015) PhD Thesis Dissertation, Universiti Teknologi MARA
Research Gate
- Article
  - 2010 Index IEEE Transactions on Advanced Packaging Vol. 33 - (2010) IEEE Transactions on Advanced Packaging, 33, 1091
  - 3-D conjugate heat transfer analysis of PLCC packages mounted in-line on a Printed Circuit Board - (2015) International Communications in Heat and Mass Transfer, 36, pp. 813-819
  - 3-D conjugate heat transfer analysis of PLCC packages mounted in-line on a Printed Circuit Board. - (2009) International Communications in Heat and Mass Transfer, 36(8), pp. 813-819
  - 3-D numerical modeling and experimental investigation of a partial premix-type porous medium burner using liquefied petroleum gas fuel - (2010) Journal of Porous Media, 13(7), pp. 655-669
  - 3-D numerical modeling and experimental investigation of partial-premix type porous medium burner using LPG fuel - (2010) Journal of Porous Media, 13(7), pp. 655-669
  - A Brief Survey of Preparation and Heat Transfer Enhancement of Hybrid Nanofluids - (2019) Strojniški vestnik – Journal of Mechanical Engineering
  - A computational fluid dynamics analysis of the wave soldering process: Influence of propeller blades on fountain flow - (2015) International Journal of Numerical Methods for Heat & Fluid Flow, 25(5)
  - A cost effective and economic method for assessing the performance of photovoltaic module enhancing techniques: Analytical and experimental study - (2023) Solar Energy, 254(4), pp. 27-41
  - A Detailed Analysis of the Modified Economic Method for Assessing the Performance of Photovoltaic Module Enhancing Techniques - (2023) Sustainability, 15(15), 12028
  - A Mesoscale Premixed LPG Burner with Surface Combustion in Porous Ceramic Foam - (2011) Energy Sources, Part A: Recovery, Utilization and Environmental Effects, 34(1), pp. 9-18
  - A Modified Economical Method for Cost Assessment Reduction of Photovoltaic Module Coolers - (2021) SSRN Electronic Journal
  - A new method for assessing photovoltaic module cooler based on lifespan effectiveness factor - (2022) Case Studies in Thermal Engineering, 35(1), 102126
  - A novel analytical filling time chart for design optimization of flip-chip underfill encapsulation process - (2019) The International Journal of Advanced Manufacturing Technology
  - A novel analytical filling time chart for design optimization of flip-chip underfill encapsulation process. - (2019) The International Journal of Advanced Manufacturing Technology, 105(4)
  - A Novel Approach for Characterizing Epoxy Mold Compound High Temperature Swelling - (2023) Journal of Microelectronics and Electronic Packaging, 20(4)
  - A practical approach in porous medium combustion for domestic application: A review - (2018) IOP Conference Series Materials Science and Engineering, 370(1), 012004
  - A Response Surface Methodology Approach to Photovoltaic Module Performance Improvement with Fin Cooling - (2024) International Journal of Renewable Energy Research
  - A review of combustion-driven thermoelectric (TE) and thermophotovoltaic (TPV) power systems - (2017) Renewable and Sustainable Energy Reviews, 71(6), pp. 572-584
  - A Review of Experimentation of Synthetic Jet Cooling - (2023) Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 109(2), pp. 27-38
  - A review of investigations on liquid fuel combustion in porous inert media - (2009) Progress in Energy and Combustion Science, 35(2), pp. 216-230
  - A Review of Moldflow and Finite Element Analysis Simulation of Chip Scale Packaging (CSP) for Light Emitting Diode (LED) - (2022) Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 99(1), pp. 158-173
  - A Study on the Effect of Epoxy Moulding Compound (EMC) Rheology during Encapsulation of Stacked-Chip Scale Packages (S-CSP) - (2009) Journal of Reinforced Plastics and Composites, 28(20), pp. 2527-2538
  - A study on thermoforming process of stretchable circuit and its performance in manufacturing of automotive lighting - (2017) ADVANCED MATERIALS FOR SUSTAINABILITY AND GROWTH: Proceedings of the 3rd Advanced Materials Conference 2016 (3rd AMC 2016); AIP Conference Proceedings, 1901(1), 110006
  - Aerodynamic Performance of Twist Morphing MAV Wing - (2014)
  - Airflow inside the nasal cavity: Visualization using computational fluid dynamics - (2010) Asian Biomedicine, 4(4), pp. 657-661
  - An Analytical Convergence Study of the Forced Air Cooling in Electronic Packaging - (2016) Applied Mechanics and Materials, 819, pp. 34-41
  - An economic feasibility assessment of implementing photovoltaic module reflectors under Malaysian meteorological conditions - (2024) Scientific Reports, 14(1)
  - An Experimental Investigation into Mechanical and Thermal Properties of Hybrid Woven Rattan/Glass-Fiber-Reinforced Epoxy Composites - (2022) Polymers, 14(24), pp. 5562
  - An experimental investigation of shear strength and adhesion on the chip-substrate joint in LED packaging - (2022) International Journal of Adhesion and Adhesives, 119(c), 103272
  - ANALISA PERILAKU ALIRAN FLUIDA CAIR PADA PROSES ENCAPSULASI IC DENGAN COMPUTATIONAL FLUID DYNAMICS
  - Analysis of biomass-residue-based cogeneration system in palm oil mills - (2003) Biomass and Bioenergy, 24(2), pp. 117-124
  - Analysis of Cold Flow Fluidization Test Results for Various Biomass Fuels - (2003) Biomass and Bioenergy, 24(6), pp. 487-494
  - Analysis of encapsulation process in 3D stacked chips with different microbump array - (2012) International Communications in Heat and Mass Transfer, 39(10), pp. 1616-1623
  - Analysis of fluid/structure interaction: Influence of silicon chip thickness in moulded packaging - (2013) Microelectronics Reliability, 53(2), pp. 334-347
  - Analysis of LED wire bonding during encapsulation process - (2020) IOP Conference Series Materials Science and Engineering, 1007(1), 012173
  - Analytical Comparisons of Standardized Nasal Cavity - (2014) Journal of Medical Imaging and Health Informatics, 4(1), pp. 14-20
  - Application of Deswirl Device in Cyclone Dust Separator - (2017) ASEAN Journal on Science and Technology for Development, 20(3&4)
  - Application of flexible printed circuit board (FPCB) in personal computer motherboards: Focusing on mechanical performance - (2012) Microelectronics Reliability, 52(4), pp. 744-756
  - Application of porous medium burner with micro cogeneration system - (2013) Proceedings of the ICE - Energy, 50, pp. 131–142
  - Applications of Porous Media Combustion Technology - A review - (2009) Applied Energy, 86(9), pp. 1365-1375
  - Applying Computational Fluid Dynamic to Predict the Thermal Performance of the Nacelle Anti-Icing System in Real Flight - (2015) Indian Journal of Science and Technology, 8(30)
  - Applying numerical method in improving emergency gate design of mengkuang dam - (2017)
  - Artificial neural network trained, one dimensional FEM model to predict two phase flow characteristics in mini/micro channels - (2007) International Journal of Heat Exchangers, 8(1), pp. 1-14
  - Assessment of porous media burner for surface/submerged flame during porous media combustion - (2017) ENGINEERING INTERNATIONAL CONFERENCE (EIC) 2016: Proceedings of the 5th International Conference on Education, Concept, and Application of Green Technology; AIP Conference Proceedings, 1818(1), 020020
  - Assessment of porous media combustion with foam porous media for surface/submerged flame - (2018) Materials Today Proceedings, 5(10), pp. 20865-20873
  - Backward Compatibility Solder Joint Formation at High Peak Reflow Temperature for Aerospace Applications - (2015) Arabian Journal for Science and Engineering, 41(5)
  - Biomass Based Cogeneration and Trigeneration for Effective Heat Recovery and Waste Management
  - Briquetting of palm fibre and shell from the processing of palm nuts to palm oil - (2002) Biomass and Bioenergy, 22(6), pp. 505-509
  - Centrifuge and storage precipitation of TiO2 nanoparticles by the sol–gel method - (2015) Journal of Alloys and Compounds, 651, pp. 557-564
  - CFD modeling of pin shape effects on capillary flow during wave soldering - (2014) International Journal of Heat and Mass Transfer, 72, pp. 400–410
  - CFD simulation and experimental analysis of flow dynamics and grinding performance of opposed fluidized bed air jet mill - (2011) International Journal of Mineral Processing, 98(1-2), pp. 94-105
  - CFD SIMULATIONS OF OSCILLATING SUBBOUNDARY LAYER VORTEX GENERATORS FOR DIFFUSER FLOW SEPARATION CONTROL
  - CFD-Based Experimental Analysis on the Effect of Free Stream Cooling on the Performance of Micro Processor Heat Sinks - (2008) International Communications in Heat and Mass Transfer, 35(6), pp. 771-778
  - Characteristic Airflow Patterns During Inspiration and Expiration: Experimental and Numerical Investigation - (2015) Journal of Medical and Biological Engineering, 35(3)
  - Characterization and Evaluation of PIV Illumination System Using High Power Light Emitting Diodes for WaterTank Applications - (2018) Instruments and Experimental Techniques, 61(3)
  - Characterization of working fluid in vertically mounted finned U-shape twin heat pipe for electronic cooling - (2012) Energy Conversion and Management, 62, pp. 31-39
  - Combustion Characteristics of Butane Porous Burner for Thermoelectric Power Generation - (2015) Journal of Combustion, 2015, pp. 1-13
  - Combustion in porous media and its applications - A comprehensive survey - (2009) Journal of Environmental Management, 90(8), pp. 2287-312
  - Comparative assessment of a porous burner using vegetable cooking oil–kerosene fuel blends for thermoelectric and thermophotovoltaic power generation - (2016) Fuel, 180, pp. 137-147
  - Comparative Study of Pressurized and Capillary Underfill Flow Using Lattice-Boltzmann Method - (2019) Arabian Journal for Science and Engineering
  - Comparative Study of the Scaling Effect on Pressure Profiles in Capillary Underfill Process - (2017) IOP Conference Series Materials Science and Engineering
  - Comparative study on porous media combustion characteristics using different discrete materials - (2018) MATEC Web of Conferences, 153(4), 01007
  - Computational aerodynamic analysis on perimeter reinforced (PR)-compliant wing - (2013) Chinese Journal of Aeronautics, 26(5), pp. 1093–1105
  - Computational Analysis of Polymer Melt Filling in a Medical Mold Cavity During the Injection Molding Process - (2022) Pertanika Journal of Science and Technology, 31(1)
  - Computational and experimental investigation in a cyclone dust separator - (1997) Proceedings of the Institution of Mechanical Engineers Part E Journal of Process Mechanical Engineering, 211(4), pp. 247-257
  - Computational fluid dynamic and thermal analysis for BGA assembly during forced convection reflow soldering process - (2012) Soldering and Surface Mount Technology, 24(2), pp. 77-91
  - Computational fluid dynamics study of pull and plug flow boundary condition on nasal airflow - (2013) Biomedical Engineering Applications Basis and Communications, 25(04)
  - Computational fluid dynamics study of the effect of posture on airflow characteristics inside the nasal cavity - (2013) Asian Biomedicine, 7(6), pp. 835-840
  - Computational prediction into staggered film cooling holes on convex surface of turbine blade - (2012) International Communications in Heat and Mass Transfer, 39(9), pp. 1367–1374
  - Computational study of a new scheme for a film-cooling hole on convex surface of turbine blades - (2013) International Communications in Heat and Mass Transfer, 43, pp. 90–99
  - Conjugate film cooling of a new multi-layer convex surface of turbine blades - (2013) International Communications in Heat and Mass Transfer, 45, pp. 86-94
  - Control Techniques for Greenhouse Phenomena in Car Cabins to Enhance Fuel Consumption, Emission Reduction, and Air Quality: A Review - (2024) Jordan Journal of Mechanical and Industrial Engineering, 18(04), pp. 721-736
  - Correction to: A Proposed Temperature-Dependent Photovoltaic Efficiency Difference Factor for Evaluating Photovoltaic Module Cooling Techniques in Natural or Forced Fluid Circulation Mode - (2022) Arabian Journal for Science and Engineering
  - Correlating scalants characteristic and air bubbling rate in submerged vacuum membrane distillation: A fouling control strategy - (2020) Journal of Membrane Science, 621, 118991
  - Corrigendum to “Combustion in porous media and its applications – A comprehensive survey” [Journal of Environmental Management 90 (2009) 2287–2312] - (2009) Journal of Environmental Management, 91(2), 550
  - Cost and time effective performance evaluation methods for photovoltaic module cooling techniques: Analytical and experimental study - (2022) Applied Energy, 326(9–10), 119940
  - Counter and parallel two-phase flow microchannel heat sinks for electronics cooling - (2006)
  - CUF Scaling Effect on Contact Angle and Threshold Pressure - (2017) Soldering and Surface Mount Technology, 29(4), pp. 173 - 190
  - Design and Fabrication of a Dual Rotor-Embedded Wing Vertical Take-Off and Landing Unmanned Aerial Vehicle - (2020) Unmanned Systems, 09(01)
  - Design and Optimization of Piezoelectric Fans for Cooling of Microelectronic Devices - (2007) Journal of Microelectronics and Electronic Packaging, 4(3), pp. 121-129
  - Design of an underwater glider platform for shallow-water applications - (2010) International Journal of Intelligent Defence Support Systems Volume, 3(3), pp. 186-206
  - Design of chainless bicycle transmission system using four linkages mechanism - (2020) IOP Conference Series Materials Science and Engineering, 1007(1), 012167
  - Design Optimization of Solid Rocket Propulsion: A Survey of Recent Advancements - (2019) Journal of Spacecraft and Rockets, 57(4), pp. 1-9
  - Development and performance analysis of novel cast copper–SiC–Gr hybrid composites - (2009) Materials & Design (1980-2015), 30(6), pp. 1957-1965
  - Development and performance analysis of partially premixed LPG porous medium combustor - (2011) Energy Sources, Part A: Recovery, Utilization and Environmental Effects, 13(13), pp. 1260-1270
  - Development and performance analysis of partially premixed LPG porous medium combustor. - (2011) Energy Sources, Part A: Recovery, Utilization and Environmental Effects, 33(13), pp. 1260-1270
  - Development of assessment methods for photovoltaic module enhancing techniques using the lifespan parameter - (2023) Heliyon, 9(1), e21294
  - Development of energy efficient porous medium burners on surface and submerged combustion modes - (2011) Proceedings of the ICE - Energy, 36(8), pp. 5132-5139
  - Development of Flexible Wings and Flapping Mechanism with Integrated Electronic Control System, for Micro Air Vehicle Research - (2013) Experimental Techniques, 37(4)
  - Development of foam porous media to undergo surface and submerged flame during premixed combustion - (2019) IOP Conference Series Materials Science and Engineering, 505(1), 012123
  - Development of premixed burner based on stabilized combustion within discrete porous medium - (2011) Journal of Porous Media, 14(10), pp. 909-917
  - Die attachment, wire bonding, and encapsulation process in LED packaging: A review - (2021) Sensors and Actuators A Physical, 329(3), 112817
  - Discrete Phase Method Particle Simulation of Ultra-fine package assembly with SAC305-TiO2 Nano-reinforced lead free solder at Different Weighted Percentages - (2017) Microelectronics Reliability, 79
  - Discrete Phase Method Study of Ball Grid Array Underfill Process using Nano-silica Filler-Reinforced Composite-Encapsulant with Varying Filler Loadings - (2017) Microelectronics Reliability, 72(C), pp. 45-64
  - Discrete Phase Model (DPM) study of nano-reinforced Lead Free Solder Sn-3.0Ag-0.5Cu (SAC305) - (2018) IOP Conference Series Materials Science and Engineering, 370(1)
  - Double-Layer Micro Porous Media Burner from Lean to Rich Fuel Mixture: Analysis of Entropy Generation and Exergy Efficiency - (2021) Entropy, 23(12), 1663
  - Dynamic warpage simulation of molded PCB under reflow process - (2021) Circuit World ahead-of-print(ahead-of-print)
  - Effect of adhesive force on underfill process based on lattice Boltzmann method - (2020) Microelectronics International, 37(1), pp. 54-63
  - Effect of Al2O3-H2O Nanofluid Concentration on Heat Transfer in a Loop Heat Pipe - (2014) Procedia Materials Science 5, pp. 137-146
  - Effect of Ceramic Coating in Combustion and Cogeneration Performance of Al2O3 Porous Medium - (2015) Journal of the Energy Institute
  - Effect of Chip Placement Speed on the Void Formation using Numerical Method - (2021) Microelectronics Journal, 114(6)
  - Effect of Contact Angle on Meniscus Evolution and Contact Line Jump of Underfill Fluid Flow in Flip-Chip Encapsulation - (2020) CFD letters, 12(6), pp. 28-38
  - Effect of CTAB Surfactant on The Stability and Thermal Conductivity of Mono and Hybrid Systems of Graphene and FMWCNT Nanolubricant - (2022) Colloids and Surfaces A Physicochemical and Engineering Aspects, 648(5)
  - Effect of Different SAC Based Nanoparticle Types on the Reflow Soldering Process of Miniaturized Components using Discrete Model Simulation - (2019) Journal of Applied Fluid Mechanics, 12(5)
  - Effect of Different Temperature Distribution on Multi-Stack BGA Package - (2021) Microelectronics International, 38(2)
  - Effect of filling level and fillet profile on pin-through-hole solder joint - (2019) The International Journal of Advanced Manufacturing Technology
  - EFFECT OF FREE STREAM TURBULENCE ON THE PERFORMANCE OF NACA 0015 AIRFOIL - (2003) ASEAN Journal on Science and Technology for Development, 20(2), pp. 117-124
  - Effect of Heat Pipe’s Configuration in Managing the Temperature of EV Battery - (2023) CFD letters, 15(3), pp. 22-34
  - Effect of ILU dispensing types for different solder bump arrangements on CUF encapsulation process - (2016) Microelectronic Engineering, 163
  - EFFECT OF INCLINED ANGLE OF PIN ARRAYS ON FLOW AND HEAT TRANSFER CHARACTERISTICS IN FLOW CHANNEL - (2018) International Heat Transfer Conference, 16
  - EFFECT OF INCLINED PINS ON FLOW AND HEAT TRANSFER CHARACTERISTICS FOR SINGLE ROW IN RECTANGULAR CHANNEL - (2018)
  - Effect of piezoelectric fan mode shape on the heat transfer characteristics - (2014) International Communications in Heat and Mass Transfer, 52
  - Effect of piezoelectric fan mode shape on the heat transfer characteristics. - (2013) International Communications in Heat and Mass Transfer
  - Effect of pin inclination angle on flow and heat transfer characteristics for a row of pins in a flow channel - (2020) International Communications in Heat and Mass Transfer, 110, 104396
  - Effect of Scale Size, Orientation Type and Dispensing Method on Void Formation in the CUF Encapsulation of BGA - (2017) Sadhana, 43(4)
  - Effect of Side and Tip Gaps of a Piezoelectric Fan on Microelectronic Cooling - (2013) IEEE Transactions on Components, Packaging, and Manufacturing Technology, 3(9), pp. 1545-1553
  - Effect of Sintering Temperature on Mullite Ceramics Fabricated from Treated Palm Oil Fuel Ash - (2015) Advanced Materials Research, 1087, pp. 202-206
  - Effect of Skin Flexibility on Aerodynamic Performance of Flexible Skin Flapping Wings for Micro Air Vehicles - (2012) Experimental Techniques, 39(1)
  - Effect of solder bump shapes on underfill flow in flip-chip encapsulation using analytical, numerical and PIV experimental approaches - (2017) Microelectronics Reliability, 81C, pp. 41-63
  - Effect of Solder Joint Arrangements on BGA Lead-Free Reliability During Cooling Stage of Reflow Soldering Process - (2012) IEEE Transactions on Components Packaging and Manufacturing Technology Part A, 2(12), pp. 2098-2107
  - Effect of stacking chips and inlet positions on void formation in the encapsulation of 3D stacked flip-chip package - (2012) International Communications in Heat and Mass Transfer, 39(5), pp. 670-680
  - Effect of synchronized piezoelectric fans on microelectronic cooling performance - (2013) International Communications in Heat and Mass Transfer, 43, pp. 81–89
  - Effect of the Gap Height of Radial Gate on Volumetric Flow Rate in Dam - (2018) IOP Conference Series Materials Science and Engineering, 370(1)
  - Effect of Thermocapillary Action in the Underfill Encapsulation of Multi-stack Ball Grid Array - (2016) Microelectronics Reliability, 66(No. 8), pp. 143 - 166
  - Effect of TiO 2 -Al 2 O 3 nanoparticle mixing ratio on the thermal conductivity, rheological properties, and dynamic viscosity of water-based hybrid nanofluid - (2020) Journal of Materials Research and Technology, 9(6), pp. 13781-13792
  - Effect of Ultra-low Vegetable Oil Droplets on Microporous Media Burner Under Surface and Submerged Flames - (2019) Arabian Journal for Science and Engineering
  - Effect of vertical stacking dies on flow behavior of epoxy molding compound during encapsulation of stacked-chip scale packages - (2010) Heat and Mass Transfer, 46(11), pp. 1315-1325
  - Effect of Wing Deformation on the Aerodynamic Performance of Flapping Wings: Fluid-Structure Interaction Approach - (2016) Journal of Aerospace Engineering, 29(4), 04016006
  - Effects of Aspect Ratio in Moulded Packaging Considering Fluid/Structure Interaction: A CFD Modelling Approach - (2017) Journal of Applied Fluid Mechanics, 10(6), pp. 1799-1811
  - Effects of aspect ratio in moulded packaging considering fluid/structure interaction: A CFD modelling approach. - (2017) Journal of Applied Fluid Mechanics, 10(6), pp. 1799-1811
  - Effects of Blade Number on the Centrifugal Pump Performance: A Review - (2022) Arabian Journal for Science and Engineering, 47(7)
  - Effects of diamond nanoparticles reinforcement into lead-free Sn-3.0Ag-0.5Cu solder pastes on microstructure and mechanical properties after reflow soldering process - (2015) Materials & Design (1980-2015), 82, pp. 206-215
  - Effects of Different Viscometer Test on Stencil Printing Process for CFD Simulation - (2021) pp. 1-18
  - Effects of Fe2NiO4 nanoparticles addition into lead free Sn–3.0Ag–0.5Cu solder pastes on microstructure and mechanical properties after reflow soldering process - (2015) Materials & Design, (1980-2015), 67(4)
  - EFFECTS OF GEOMETRY AND NUMBER OF HOLLOW ON THE PERFORMANCE OF RECTANGULAR FINS IN MICROCHANNEL HEAT SINKS - (2013) Isı Bilimi ve Tekniği Dergisi, 33(1), pp. 1-9
  - EFFECTS OF HORIZONTAL/VERTICAL FIN TIP GAPS ON MICROCHANNEL HEAT SINKS PERFORMANCE IN ELECTRONIC COOLING - (2013) Isı Bilimi ve Tekniği Dergisi, 33(2), pp. 23-34
  - Effects of outlet vent arrangement on air traps in stacked-chip scale package encapsulation - (2012) International Communications in Heat and Mass Transfer, 39(3), pp. 405–413
  - Effects of PCB thickness on adjustable fountain wave soldering - (2015) Sadhana, 40(7)
  - Effects of pressure on thermal contact resistance for rough mating surfaces - (2017) ASEAN Journal on Science and Technology for Development, 18(2)
  - Effects of Temperature on the Wave Soldering of Printed Circuit Boards: CFD Modeling Approach - (2016) Journal of Applied Fluid Mechanics, 9(5), pp. 2053-2062
  - Effects of the preheat layer thickness on surface/submerged flame during porous media combustion of micro burner - (2017) Proceedings of the ICE - Energy, 122
  - Effects of Tip Gap and Amplitude of Piezoelectric Fans on the Performance of Heat Sinks in Microelectronic Cooling - (2012) Heat and Mass Transfer, 48(6)
  - Empirical Viscosity Modeling for SiO2 and Al2O3 Nanofluids using the Response Surface Method - (2020) Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 75(3), pp. 63-72
  - Enhancement in Cathodic Redox Reactions of Single-Chambered Microbial Fuel Cells with Castor Oil-Emitted Powder as Cathode Material - (2021) Materials, 14(16), 4454
  - Enhancement of nanofluid heat transfer in a mini-tube using SiO 2 nanoparticles - (2019) Advances in Materials and Processing Technologies, 5(4), pp. 1-10
  - Enhancing Closed System Efficiency through CuO Nanofluids: Investigating Thermophysical Properties and Heat Transfer Performance - (2024) Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 117(1), pp. 179-188
  - Entropy Generation and Exergy Analysis of Premixed Fuel-Air Combustion in Micro Porous Media Burner - (2020) Entropy, 22(10)
  - Erratum to "Channel depth, air mass flow rate and air distribution duct diameter optimization of photovoltaic thermal (PV/T) air collectors linked to residential buildings" - (2021) pp. 1-2
  - Evaluation of Stability and Enhancement of Nano Fluid Methods - (2024) Journal of Physics Conference Series, 2688(1), 012016
  - Experiential study on temperature and emission performance of micro burner during porous media combustion - (2018) IOP Conference Series Materials Science and Engineering, 370(1), 012057
  - Experiment and simulation to develop clean porous medium surface combustor using LPG - (2013) Isı Bilimi ve Tekniği Dergisi, 33(1), pp. 55-61
  - Experiment on forced convective heat transfer enhancement using MWCNTs/GNPs hybrid nanofluid and mini-tube - (2017) International Journal of Heat and Mass Transfer, 115, Part B, pp. 1121–1131
  - Experimental Analysis and FEM Simulation of Finned U-shape Multi Heat Pipe for Desktop PC Cooling - (2011) Energy Conversion and Management, 52(8-9), pp. 2937–2944
  - Experimental analysis and FEM simulation of loop heat charged with diamond nanofluid for desktop PC cooling - (2015) IOP Conference Series Materials Science and Engineering, 88(1), 012038
  - Experimental Analysis and FEM Simulation of Novel Finned Loop Heat Pipe - (2014) Advanced Materials Research, 925, pp. 481-485
  - Experimental analysis of a porous burner operating on kerosene–vegetable cooking oil blends for thermophotovoltaic power generation - (2015) Energy Conversion and Management, 96, pp. 544-560
  - Experimental analysis on combustion characteristics of single layer porous media for various burner sizes - (2020) IOP Conference Series Materials Science and Engineering, 852(1), 012085
  - Experimental and numerical investigation of 3D gas flow temperature field in infrared heating reflow oven with circulating fan - (2015) International Journal of Heat and Mass Transfer, 87
  - Experimental and numerical investigation of flow and thermal effects on flexible printed circuit board - (2017) Microelectronics Reliability, 72, pp. 5-17
  - Experimental and Numerical Studies of Finned L-Shape Heat Pipe for Notebook-PC Cooling - (2013) IEEE Transactions on Components, Packaging, and Manufacturing Technology, 3(6), pp. 978 - 988
  - Experimental and numerical studies of porous media combustion in micro burner - (2018)
  - Experimental Investigation and Optimization of Heat Input and Coolant Velocity of Finned Twin U-Shaped Heat Pipe for CPU Cooling - (2011) Experimental Techniques, 37(6)
  - Experimental investigation of aerodynamic performances on a rotating cylinder with surface roughness using light weight smart motor (LWSM) - (2017) Indian Journal of Geo-Marine Sciences, 46(8), pp. 1673-1681
  - Experimental investigation of the performance of a liquid fuel-fired porous burner operating on kerosene-vegetable cooking oil (VCO) blends for micro-cogeneration of thermoelectric power - (2015) Renewable Energy 74, pp. 505-516
  - Experimental Investigation of Water-Cooled Heat Pipes in the Thermal Management of Lithium-Ion EV Batteries - (2019) Arabian Journal for Science and Engineering, 44(9)
  - Experimental investigation on the heat transfer performance of heat pipes in cooling hev lithium-ion batteries - (2018) Heat Transfer Research, 49(17)
  - Experimental Method on Solder Joint of Ball Grid Array Using Reflow Oven - (2018) International Journal of Current Research in Science Engineering & Technology, 1(Spl-1), pp. 487
  - Experimental Method to Measure High Temperature Hygroscopic Swelling in Epoxy Mold Compounds and Dielectric Build-Up Films - (2024) Journal of Electronic Packaging, Transactions of the ASME, 147(1), pp. 1-9
  - Experimental Model to Optimize the Design of Cylindrical Heat Pipes for Solar Collector Application - (2013) Applied Mechanics and Materials, 393, pp. 735-740
  - Experimental study of self-alignment during reflow soldering process - (2018)
  - Experimental study on luminous intensity of white LEDs of different configurations - (2020) IOP Conference Series Materials Science and Engineering, 1007(1), 012145
  - Fabrication and study on tribological characteristics of cast copper–TiO2–boric acid hybrid composites - (2009) Materials & Design (1980-2015), 30(5), pp. 1632-1637
  - Fabrication of porcelain foam substrates coated with SiC, Ni, and Cr using the dip-coating technique - (2014) Ceramics International, 41, pp. 2940-2947
  - Feasibility Study of Cogeneration in a Plywood Industry with Power Export to Grid, Applied Energy 86 (2009) 657–662. - (2009) Applied Energy, 86(5), pp. 657-662
  - Filling efficiency of flip-chip underfill encapsulation process - (2019) Soldering and Surface Mount Technology, 32(1), pp. 10-18
  - Finite element analysis on the effect of solder joint geometry for the reliability of ball grid array assembly with flexible and rigid PCBS - (2014) Journal of Engineering Science and Technology, 9(1), pp. 47-63
  - Finite Element Analysis on the Effect of Solder Joint Geometry on the Reliability of BGA Assembly on Flexible and Rigid PCBs - (2014) Journal of Engineering Science and Technology, 9(1), pp. 47-63
  - Finite volume analysis of pressurized underfill encapsulation process - (2016) ARPN Journal of Engineering and Applied Sciences, 11(1), pp. 166-171
  - Finite volume based CFD simulation of pressurized flip-chip underfill encapsulation process - (2010) Microelectronics Reliability, 50(1), pp. 98-105
  - Finite Volume Method Study on Contact Line Jump Phenomena and Dynamic Contact Angle of Underfill Flow in Flip-Chip of Various Bump Pitches - (2019) IOP Conference Series Materials Science and Engineering, 530
  - Finite volume-based simulation of the wave soldering process: Influence of the conveyor angle on pin-through-hole capillary flow - (2016)
  - Finite volume-based simulation of the wave soldering process: Influence of the conveyor angle on pin-through-hole capillary flow. - (2015) Numerical Heat Transfer Applications, 69(3), pp. 1-16
  - Flow Behavior Analysis of Emc in Molded Underfill (Muf) Encapsulation for Multi Flip-Chip Package - (2018) Journal of Physics Conference Series, 1082(1), 012015
  - Flow Induced Deflection and Stress on Flexible Printed Circuit Board in Fan-Cooled Electronic Systems: FSI Approach - (2012) IEEE Transactions on Components, Packaging, and Manufacturing Technology, 2(4), pp. 617-624
  - Fluid Structure Interaction of Unsteady Aerodynamics of Flapping Wing at Low Reynolds Number - (2013) Engineering Applications of Computational Fluid Mechanics, 7(1), pp. 144-158
  - Fluid-Structure Interaction Analysis on the Effect of Chip Stacking in a 3D Integrated Circuit Package with Through-Silicon Vias during Plastic Encapsulation - (2014) Microelectronic Engineering, 113(1), pp. 40-49
  - Fluid/structure interaction analysis of the effects of solder bump shapes and input/output counts on moulded packaging - (2012)
  - Fluid/Structure Interaction Analysis of the Effects of Solder Bump Shapes and Input/Output Counts on Moulded Packaging. - (2012) IEEE Transactions on Components Packaging and Manufacturing Technology Part A 2(4), pp. 604-616
  - Fluid/Structure Interaction Investigation in PBGA Packaging - (2012) IEEE Transactions on Components, Packaging, and Manufacturing Technology, 2(11), pp. 1786-1795
  - FSI Analysis of the Effect of Aspect Ratio of Stacked Chip in Encapsulation Process of Moulded Underfill Packaging - (2015) Applied Mechanics and Materials, 786, pp. 361-366
  - FSI Analysis of Wire Sweep in Encapsulation Process of Plastic Ball Grid Array Packaging - (2013) Isı Bilimi ve Tekniği Dergisi, 33(2)
  - FSI implications of EMC rheological properties to 3D IC with TSV structures during plastic encapsulation process - (2013) Microelectronics Reliability, 53(4), pp. 600–611
  - FSI Simulation of Wire Sweep PBGA Encapsulation Process Considering Rheology Effect - (2012) IEEE Transactions on Components Packaging and Manufacturing Technology Part A 2(4)
  - FSI Study of the Effect of Air Inlet/Outlet Arrangements on the Reliability and Cooling Performances of Flexible Printed Circuit Board Electronics - (2013) Isı Bilimi ve Tekniği Dergisi, 33(1)
  - FSI STUDY OF THE EFFECT OF AIR INLET/OUTLET ARRANGEMENTS ON THE RELIABILITY AND COOLING PERFORMANCES OF FLEXIBLE PRINTED CIRCUIT BOARD ELECTRONICS HAVA GİRİŞ/ÇIKIŞ KONUMLARININ ESNEK DEVRE KARTLARININ GÜVENİLİRLİĞİ VE SOĞUTMA PERFORMANSINA ETKİSİNİN İNCELENMESİ İÇİN AKE ÇALIŞMASI - (2013)
  - FVM based numerical study on the effect of solder bump arrangement on capillary driven flip chip underfill process - (2010) International Communications in Heat and Mass Transfer, 37(3), pp. 281-286
  - FVM based Simulation on Multi-Stack Ball Grid Array (BGA) - (2016) AIP Conference Proceedings
  - Hardness Profiles of Sn-3.0Ag-0.5Cu-TiO2 Composite Solder by Nanoindentation - (2016) Materials Science and Engineering A, 669
  - Heat Transfer Analysis of Diffusion Furnace for Wafer Annealing Process - (2020) Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 75(3), pp. 43-53
  - Heat transfer analysis on wafer annealing process in semiconductor multi-wafer furnace using CFD simulation - (2022) Journal of Mechanical Science and Technology, 36(11)
  - Heat transfer and deformation analysis of flexible printed circuit board under thermal and flow effects - (2020) Circuit World ahead-of-print(ahead-of-print)
  - Heat Transfer and Entropy Generation Abilities of MWCNTs/GNPs Hybrid Nanofluids in Microtubes - (2019) Entropy, 21(480), pp. 1-17
  - Heat transfer enhancement by flexible printed circuit board's deformation - (2017) International Communications in Heat and Mass Transfer 84(May), pp. 86-93
  - Heat transfer enhancement of LEDs with a combination of piezoelectric fans and a heat sink - (2016) Microelectronics Reliability, 68
  - Heat transfer enhancement using piezoelectric fan in electronic cooling - Experimental and numerical observations - (2012) Journal of Thermal Science and Technology, 32(1), 41
  - HEAT TRANSFER ENHANCEMENT USING PIEZOELECTRIC FAN IN ELECTRONIC COOLING -EXPERIMENTAL AND NUMERICAL OBSERVATIONS - (2012) Journal of Thermal Science and Technology
  - Heat Transfer in a Loop Heat Pipe using Diamond-H 2 O Nanofluid - (2017) Heat Transfer Engineering, 39(13-14)
  - Heat Transfer in a Loop Heat Pipe Using Fe 2 NiO 4 -H 2 O Nanofluid - (2017) MATEC Web of Conferences, 109, 05001
  - Heat Transfer Performance of a Synthetic Jet at Various Driving Frequencies and Diaphragm Amplitude - (2018) Arabian Journal for Science and Engineering, 44(3)
  - Heat transfer performance of a synthetic jet generated by diffuser-shaped orifice - (2019)
  - Husk-Fueled Steam Turbine Cogeneration for a Rice Mill with Power Export—A Case Study - (2011) Energy Sources, Part A: Recovery, Utilization and Environmental Effects, 33(8), pp. 724-734
  - Hybrid Mesh for Nasal Airflow Studies - (2013) Computational and Mathematical Methods in Medicine, 2013(3), 727362
  - Impact of the Solar Ventilation System on the Fuel Savings and CO2 Reductions for Gasoline Vehicle Engine Parked Under the Sun - (2023) International Journal on Energy Conversion (IRECON), 11(2), pp. 45
  - Impacts of impeller blade number on centrifugal pump performance under critical cavitation conditions - (2024) Proceedings of the Institution of Mechanical Engineers Part E Journal of Process Mechanical Engineering
  - Implications of Adjustable Fountain Wave in Pin Through Hole Soldering Process - (2014) Arabian Journal for Science and Engineering, 39(12)
  - Implications of Adjustable Fountain Wave in Pin Through Hole Soldering Process. - (2014) Arabian Journal for Science and Engineering
  - Improvement of Porous Porcelain through Glaze Coating - (2016) Materials Science Forum, 840, pp. 19-23
  - Influence of copper pillar bump structure on flip chip packaging during reflow soldering: a numerical approach - (2021) Microelectronics International ahead-of-print(ahead-of-print)
  - Influence of Gap Height in Flip Chip Underfill Process With Non-Newtonian Flow Between Two Parallel Plates - (2012) Journal of Electronic Packaging, Transactions of the ASME, 134(1), 011003, pp. 1-6
  - Influence of low concentration of diamond water nanofluid in loop heat pipe - (2017) International Journal of Heat and Technology, 35(3), pp. 539-548
  - Influence of Material Properties on the Fluid-Structure Interaction aspects during Molded Underfill Process - (2017) MATEC Web of Conferences, 97, 01059
  - Influence of moisture concentration and hydrophobic material on induced stress in FCBGA package under reflow - (2021) Soldering and Surface Mount Technology ahead-of-print(ahead-of-print)
  - Influence of nanofluid on heat transfer in a loop heat pipe - (2013) International Communications in Heat and Mass Transfer, 47, pp. 82-91
  - Influence of Nanoparticles on Thermophysical Properties of Hybrid Nanofluids of Different Volume Fractions - (2022) Nanomaterials, 12(15), pp. 12
  - Influence of oxyhydrogen gas retrofit into two-stroke engine on emissions and exhaust gas temperature variations - (2024) Heliyon, 10(7), e26597
  - Influence of pin offset in PCB through-hole during wave soldering process: CFD modeling approach - (2013) International Communications in Heat and Mass Transfer, 48, pp. 116–123
  - Influence of printed circuit board thickness in wave soldering - (2017) Scientia Iranica, 24(6)
  - Influence of PTH offset angle in wave soldering with thermal-coupling method - (2014) Soldering and Surface Mount Technology, 26(3)
  - Influence of reaction layer thickness on surface/submerged flame during porous media combustion of micro burner - (2019) IOP Conference Series Materials Science and Engineering, 508, 012072
  - Influence of Silica Oxide Nanofluid for Different Concentrations on Photovoltaic Cell - (2024) Journal of Nanofluids, 13(3), pp. 772-782
  - Influence of solder bump arrangements on molded IC encapsulation - (2014) Microelectronics Reliability, 54(4)
  - Investigation of micro burner performance during porous media combustion for surface and submerged flames - (2018) IOP Conference Series Materials Science and Engineering, 370(1), 012049
  - Investigation of Nano-Reinforced Lead-Free Solder During Reflow Soldering-A Molecular Dynamic Approach - (2020) CFD letters, 12(12), pp. 75-84
  - Investigation of the fluid/structure interaction phenomenon in IC packaging - (2012) Microelectronics Reliability, 52(1), pp. 241-252
  - Investigation of Thermodynamic Properties and Stability of Metal Oxide (CuO and Al 2 O 3 )/Deionized Water Nanofluids for Enhanced Heat Transfer Applications - (2024) pp. 1-26
  - Investigation of Thermodynamic Properties and Stability of Metal Oxide (CuO and Al2O3)/Deionized Water Nanofluids for Enhanced Heat Transfer Applications - (2024) Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 121(1), pp. 148-172
  - Investigation on nano-reinforced solder paste after reflow soldering part 1: Effects of nano-reinforced solder paste on melting, hardness, spreading rate, and wetting quality - (2018) Microelectronics Reliability, 84
  - Investigations of Infrared Desktop Reflow Oven with FPCB Substrate during Reflow Soldering Process - (2021) Metals, 11(8), 1155
  - Inﬂuence of nanoﬂuid on heat transfer in a loop heat pipe - (2015) International Communications in Heat and Mass Transfer, 47, pp. 82-91
  - Lattice boltzmann and finite volume simulations of multiphase flow in BGA encapsulation process - (2015) ARPN Journal of Engineering and Applied Sciences, 10(17), pp. 7354-7360
  - Lattice Boltzmann Method of Different BGA Orientations on I-Type Dispensing Method - (2016) PLOS ONE, 11(7)
  - Lattice Boltzmann method study of BGA bump arrangements on void formation - (2015) Microelectronics Reliability, 56
  - Lattice Boltzmann method study of effect three dimensional stacking-chip package layout on micro-void formation during encapsulation process - (2016) Microelectronics Reliability, 65
  - Lattice Boltzmann Model of 3D Multiphase Flow in Artery Bifurcation Aneurysm Problem - (2016) Computational and Mathematical Methods in Medicine 2016(19, supplement 3)
  - Lead-free solder SAC 305 Volume Reduction and Cold Slump after Stencil Printing Process - (2020) OP Conference Series Materials Science and Engineering, 852(1), 012084
  - Life cycle assessment of toxicity potential of metallic elements and process stages in electronics: A case study of electronic connector leads - (2017) Environmental Engineering and Management Journal, 16(7), pp. 1521-1530
  - Lift performance of a cambered wing for aerodynamic performance enhancement of the flapping wing - (2015) Jurnal Teknologi, 75(8), pp. 43-47
  - Mathematical modelling of flow and sediment pattern at Ijok Intake, Ijok River, Perak, Malaysia - (2012) International Journal of Modelling and Simulation, 32(3)
  - Mechanical reliability of self-aligned chip assembly after reflow soldering process - (2020) Soldering and Surface Mount Technology ahead-of-print(ahead-of-print)
  - Metal oxide nanofluids in electronic cooling: a review - (2020) Journal of Materials Science: Materials in Electronics, 31, pp. 4381–4398
  - Microstructure and mechanical properties of Pb-free Sn–3.0Ag–0.5Cu solder pastes added with NiO nanoparticles after reflow soldering process - (2016) Materials & Design, 90, pp. 499-507
  - Modelling and analysis of the effect of stacking chips with TSVs in 3D IC package encapsulation process - (2012) Maejo International Journal of Science and Technology, 6(02), pp. 159-185
  - Modified methods for assessing photovoltaic solar thermal collectors - (2021) Case Studies in Thermal Engineering, 28(101690)
  - Molecular dynamics simulation of the nano- reinforced lead-free solder at different reflow soldering process temperature - (2019) IOP Conference Series Materials Science and Engineering, 701(1), 012014
  - Multiphase Flow in Solder Paste Stencil Printing Process using CFD approach - (2018) Penerbit Akademia Baru
  - Nanofluid-filled heat pipes in managing the temperature of EV lithium-ion batteries - (2019) Journal of Physics Conference Series, 1349(1), 012123
  - Numerical Analysis of Nozzle Flow and Spray Characteristics from Different Nozzles Using Diesel and Biofuel Blends - (2019) Energies, 12(2), pp. 281
  - Numerical analysis on the effects of different inlet gates and gap heights in TQFP encapsulation process - (2011) International Journal of Heat and Mass Transfer, 54(9-10), pp. 1861-1870
  - Numerical and experimental investigations of passive flow control devices on a backward facing step - (2009) International Journal of Engineering and Technology, 6(2), pp. 21-29
  - Numerical and experimental investigations on effect of fan height on the performance of piezoelectric fan in microelectronic cooling - (2009) International Communications in Heat and Mass Transfer, 36(1), pp. 51-58
  - Numerical and Experimental Investigations on Speaker-Driven Synthetic Jet Actuator for Electronic Cooling Applications - (2019) Heat Transfer Research, 50(14)
  - Numerical assessment on heat transfer performance of double-layered oblique fins microchannel heat sink with Al2O3 nanofluid - (2021) Thermal Science, 26(00), pp. 142-142
  - Numerical Investigation of Heat Transfer in Plastic Leaded Chip Carrier (PLCC) Packages in In-line Arrangement - (2010) Journal of Modeling Design and Management of Engineering Systems, 5(1), pp. 11-22
  - Numerical investigation on rheology models during encapsulation of moulded underfill (MUF) for flip-chip package - (2023) Polymer Bulletin, 81(3), pp. 1-22
  - Numerical Investigation on the Effect of Injection Pressure on Melt Front Pressure and Velocity Drop - (2015) Applied Mechanics and Materials, 786, pp. 210-214
  - Numerical Investigation on the Effect of Pressure and Temperature on the Melt Filling During Injection Molding Process - (2016) Arabian Journal for Science and Engineering, 41(5)
  - Numerical Investigation on the Effect of Squeegee Angle during Stencil Printing Process - (2018) Journal of Physics Conference Series, 1082(1), 012057
  - Numerical Investigations of Membrane Surface Effects on NACA 643- 218 Airfoil - (2014) Applied Mechanics and Materials, 564, pp. 60-65
  - Numerical investigations on the effects of different cooling periods in reflow-soldering process - (2015) Heat and Mass Transfer, 51(10)
  - Numerical Modeling and Analysis of Microbump Pitch Effect in 3D IC Package with TSV during Molded Underfill (MUF) - (2013) Engineering Applications of Computational Fluid Mechanics, 7(2), pp. 210-222
  - Numerical modeling of a pitching airfoil - (2010)
  - Numerical Simulation Based Observation on the Contact Line Jump in Flip-Chip Under fill Process - (2018) International Journal of Mechanical and Production Engineering, 6(9)
  - Numerical simulation of self-alignment of chip resistor components for different silver content during reflow soldering - (2017) Microelectronics Reliability, 79
  - Numerical Study of Heat Transfer Characteristics of Laminar Nanofluids Flow in Oblique Finned Microchannel Heat Sink: Effects of Different Base Fluids and Volume Fraction of Nanoparticles - (2020) Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 76(3), pp. 25-37
  - Numerical Study of Inspiratory and Expiratory Flow in a Human Nasal Cavity - (2010) Journal of Medical and Biological Engineering, 31(3), pp. 201-206
  - Numerical Study of Mold Filling during Encapsulation Process - (2015) Applied Mechanics and MaterialsAt: Trans Tech Publications, Switzerland, 786 (2015), pp. 318-322
  - Numerical Study on Hydrodynamic Performance of Shallow Underwater Glider Platform - (2012) Indian Journal of Geo-Marine Sciences, 41(2), pp. 124-133
  - Numerical study on the influence of nozzle spray shape on spray characteristics using diesel and biofuel blends - (2019) Biofuels, 12(9), pp. 1-13
  - Optimization modeling of the cooling stage of reflow soldering process for ball grid array package using the gray-based Taguchi method - (2012) Microelectronics Reliability, 52(6), pp. 1143–1152
  - Optimization of 3D IC stacking chip on molded encapsulation process: a response surface methodology approach - (2019) The International Journal of Advanced Manufacturing Technology, 103(1-4)
  - Optimization of aerodynamic efficiency for twist morphing MAV wing - (2014) Chinese Journal of Aeronautics, 27(3)
  - Optimization of flexible printed circuit board electronics in the flow environment using response surface methodology - (2013) Microelectronics Reliability, 53(12), pp. 1996–2004
  - Optimization of flexible printed circuit board’s cooling with air flow and thermal effects using response surface methodology - (2021) Microelectronics International ahead-of-print(ahead-of-print)
  - Optimization of IC encapsulation considering fluid/structure interaction using response surface methodology - (2012) Simulation Modelling Practice and Theory, 29, pp. 109-122
  - Optimization of pin through hole connector in thermal fluid–structure interaction analysis of wave soldering process using response surface methodology - (2015) Simulation Modelling Practice and Theory, 57
  - Optimization of SiO2 Nanoparticle Mass Concentration and Heat Input on a Loop Heat Pipe - (2015) Case Studies in Thermal Engineering, 6(C)
  - Optimization of the Assessment Method for Photovoltaic Module Enhancers: A Cost-Efficient Economic Approach Developed through Modified Area and Cost Factor - (2024) Processes, 12(5), pp. 988
  - Optimization of the reflow soldering process with multiple quality characteristics in ball grid array packaging by using the grey-based Taguchi method - (2013) Microelectronics International, 30(3), pp. 151-168
  - Optimum Tip Gap and Orientation of Multi-Piezofan for Heat Transfer Enhancement of Finned Heat Sink in Microelectronic Cooling - (2012) International Journal of Heat and Mass Transfer, 55(21-22)
  - Overview of the Important Factors Influencing the Performance of Eco-Friendly Brake Pads - (2022) Polymers, 14(6), 1180
  - Oxygen Uptake by Biological Processes inside Oxidation Ditch - (2015) Applied Mechanics and Materials, 802, pp. 490-495
  - PACKAGE-ON-PACKAGE (POP) UNDERFILL PROCESS USING A MATERIAL DAM METHOD - (2022) ASEAN Engineering Journal, 12(2), pp. 205-210
  - Pengawalan Pertumbuhan Sebatian antara Logam Sambungan Pateri-Papan Litar Bercetak Menggunakan Salutan Nikel - (2018) Sains Malaysiana, 47(9), pp. 2157-2162
  - Performance assessment of a photovoltaic module enhancer: insight into a new lifespan and cost effectiveness factor - (2024) International Journal of Low-Carbon Technologies, 19, pp. 257-267
  - Performance of Functionalized MWCNT–Water Nanofluids for Heat Transfer Applications - (2020) Arabian Journal for Science and Engineering, 45(39), pp. 1-12
  - Performance Optimization of Photovoltaic Modules Using reflectors and Response Surface Methodology - (2024) International Journal of Renewable Energy Research
  - Performance, combustion characteristics and economics analysis of a combined thermoelectric and thermophotovoltaic power system - (2021) Applied Thermal Engineering, 193(2), 117051
  - Physical, mechanical, and thermal properties improvement of porous alumina substrate through dip-coating and re-sintering procedures - (2016) Ceramics International, 42(6)
  - Piezoresistive effects in controllable defective HFTCVD graphene-based flexible pressure sensor - (2015) Scientific Reports, 5(1), 14751
  - Plant based energy potential and biomass utilization in Malaysia - (2000) International Energy Journal, 1(2), pp. 77-88
  - Plastic Ball Grid Array Encapsulation Process Simulation on Rheology Effect - (2011) TELKOMNIKA (Telecommunication Computing Electronics and Control), 9(1), pp. 27-36
  - Prediction of the Void Formation in No-Flow Underfill Process using Machine Learning-based Algorithm - (2022) Microelectronics Reliability, 135(4)
  - Prem_AMR.925.481 - (2014)
  - QUAD FLAT NO-LEAD PACKAGE WITH DIFFERENT THERMAL PROFILES AND SOLDER PAD FINISHING FOR VOID MINIMIZATION - (2022) Jurnal Teknologi, 84(6-2), pp. 65-75
  - Recent Advances on Thermally Conductive Adhesive in Electronic Packaging: A Review - (2021) Polymers
  - Recent fluid–structure interaction modeling challenges in IC encapsulation – A review - (2014) Microelectronics Reliability, 54(8)
  - Reflow Optimization Process: Thermal Stress Using Numerical Analysis and Intermetallic Spallation in Backwards Compatibility Solder Joints - (2015) Arabian Journal for Science and Engineering, 40(6), pp. 1669-1679
  - Reflow Optimization Process: Thermal Stress Using Numerical Analysis and Intermetallic Spallation in Backwards Compatibility Solder Joints. - (2015) Arabian Journal for Science and Engineering
  - Regional Segregation With Spatial Considerations-Based Analytical Filling Time Model for Non-Newtonian Power-Law Underfill Fluid in Flip-Chip Encapsulation - (2019) Journal of Electronic Packaging, Transactions of the ASME, 141(4), 041009
  - Remote Lab Generator (RLGen): A software tool using auto-generating technique to develop a remote lab - (2007) International Journal of Online Engineering (iJOE), 3(4)
  - Research Article Effects of Solder Temperature on Pin Through-Hole during Wave Soldering: Thermal-Fluid Structure Interaction Analysis - (2014) The Scientific World Journal, 2014(2), pp. 1-13
  - Review: A Critical Overview of Limitations of CFD Modeling in Nasal Airflow - (2012) Journal of Medical and Biological Engineering, 32 (2), pp. 3-10
  - Revolutionizing photovoltaic excellence: Unveiling a cutting-edge approach to assessing module enhancers for optimal area and cost efficiency - (2024) Case Studies in Thermal Engineering, 55(1), 104139
  - Rice Moisture Imaging Using Electromagnetic Measurement Technique - (2003) Food and Bioproducts Processing, 81(3), pp. 159-169
  - SAC105 Stencil printing process using cross viscosity model - (2019) Universiti Sains Malaysia
  - Sago Starch as Binder and Pore-Forming Agent for the Fabrication of Porcelain Foam - (2014) Ceramics International, 40(3), pp. 4777–4784
  - Scaling Effect on Velocity Profiles in Capillary Underfill Flow - (2017) IOP Conference Series Materials Science and Engineering
  - Selected water thermal properties from molecular dynamics for engineering purposes - (2020) Journal of Molecular Liquids, 324(08), 114703
  - Simulation Investigations on Fluid/Structure Interaction in the Reflow Soldering Process of Board-Level BGA Packaging - (2013) International Journal of Computer Theory and Engineering, 5(4), pp. 645-649
  - Simulation Study on the Production of Nano-Sized Materials at Mixing Stage - (2014) Advanced Materials Research, 832, pp. 118-123
  - Single-phase heat transfer enhancement in micro/minichannels using nanofluids: Theory and applications - (2016) Applied Energy, 164, pp. 733-755
  - Stability, thermal conductivity and rheological properties of graphene and MWCNT in nanolubricant using additive surfactants - (2021) Case Studies in Thermal Engineering, 28(18), 101607
  - Standardization of Malaysian Adult Female Nasal Cavity - (2013) Computational and Mathematical Methods in Medicine, 2013(2), 519071
  - Stencil printing process performance on various aperture size and optimization for lead-free solder paste - (2019) The International Journal of Advanced Manufacturing Technology, 102(9-12)
  - Strength analysis for designing a bicycle transmission system without chain - (2020) IOP Conference Series Materials Science and Engineering, 1007(1), 012168
  - Study of Different Dispensing Patterns of No-Flow Underfill Using Numerical and Experimental Methods - (2021) Journal of Electronic Packaging, Transactions of the ASME, 143(3)
  - Study of flow visualization in stacked-Chip Scale Packages (S-CSP) - (2007) International Communications in Heat and Mass Transfer, 34(7), pp. 820-828
  - Study of velocity profiles of orbal biological system (OBS) using computational fluid dynamics (CFD) - (2018) Journal of Computational Methods in Sciences and Engineering, 19(2), pp. 1-9
  - Study on convective heat transfer and pressure drop of MWCNTs/water nanofluid in mini-tube - (2018) Journal of Thermal Analysis and Calorimetry, 135(6)
  - Study on the Addition of Nanoparticles in the Lead-free Solder During Reflow Soldering via Numerical Simulation - A Review - (2020) CFD letters, 12(5), pp. 111-119
  - Study on the effect of number of film cooling rows on the thermal performance of gas turbine blade - (2012) Isı Bilimi ve Tekniği Dergisi, 32(2), pp. 89-98
  - Study on the Effect of Stack Thickness During Encapsulation of Stacked-Chip Scale Packages (S-CSP) - (2008) Journal of Microelectronics and Electronic Packaging, 5(2), pp. 62-67
  - Study on the Fluid-Structure Interaction of Flexible Printed Circuit Board Electronics in the Flow Environment - (2012) IEEE Transactions on Components, Packaging, and Manufacturing Technology, 2(8), pp. 1335-1345
  - Study on the fluid/structure interaction at different inlet pressures in molded packaging - (2011) Microelectronic Engineering, 88(10), pp. 3182-3194
  - Study on the Fluid–Structure Interaction at Different Layout of Stacked Chip in Molded Packaging - (2017) Arabian Journal for Science and Engineering, 42(11)
  - Study on the Fluid–Structure Interaction of Flexible Printed Circuit Board Motherboard in Personal Computer Casings - (2013) Microelectronics International, 30(3), pp. 138-150
  - Synthetic Jet as an Electronic Cooling Application - (2015) Nigerian Journal of Botany, 2(9), pp. 90-94
  - Temperature Prediction on Flexible Printed Circuit Board in Reflow Oven Soldering for Motherboard Application - (2019) IOP Conference Series Materials Science and Engineering, 530(1), 012019
  - The Comparison Between Water Models In Predicting Water Thermal And Dynamic Properties From Molecular Dynamics - (2020) INTERNATIONAL JOURNAL OF SCIENTIFIC & TECHNOLOGY RESEARCH, 9 (8), pp. 511-516
  - The developing plane channel flow over water-repellent surface containing transverse grooves and ribs - (2018) Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 45(1), pp. 141-148
  - The Developing Plane Channel Flow over Water-Repellent Surface Containing Transverse Grooves and Ribs. - (2018)
  - The Development and Performance Analysis of Partially Premixed LPG Porous Medium Combustor - (2011) Energy Sources Part A: Recovery, (13), pp. 1260-1270
  - The Effect of Freestream Flow Velocities on the Flexible Printed Circuit Board with Different BGA Package Arrangements - (2017) Arabian Journal for Science and Engineering, 42(2)
  - The Effect of Morphing Force on Aerodynamic Performances of TM Wing - (2014) Advanced Materials Research, 980
  - The effect of sago as binder in the fabrication of alumina foam through the polymeric sponge replication technique - (2015) Journal of the European Ceramic Society, 35, pp. 1905–1914
  - The Effect of Sintering Conditions on the Microstructure and Electrical Properties of Pb(Zr0.52Ti0.48)O3 Ceramic - (2014) JOURNAL OF MECHANICAL ENGINEERING AND SCIENCES 6, pp. 901-906
  - The effect of wick structure and filling ratio to the vapour chamber performance in electronic cooling system using an experimental method - (2011) ESTEEM Academic Journal, 7(1), pp. 31-41
  - The Heat Transfer Performance of Gold/Water Nanofluid Flows in Minitube using Thermal Lattice Boltzmann Method - (2016) Pertanika Journal of Science and Technology, 24(2), pp. 423 - 438
  - Thermal analysis of dual piezoelectric fans for cooling multi-LED packages - (2014) Microelectronics Reliability, 54(8)
  - Thermal Analysis of Micro-Channel Heat Exchangers with Two-Phase Flow using FEM - (2005) International Journal of Numerical Methods for Heat & Fluid Flow, 15(1), pp. 43-60
  - THERMAL CONTACT RESISTANCE FOR HARD AND SOFT MATING MATERIALS IN A VACUUM ENVIRONMENT - (2018)
  - Thermal Effect in Underfill Encapsulation of Ball Grid Array - (2016) Global Journal Researches in Engineering: F Electrical and Electronics EN; Global Journals Inc. (USA), 16(7)
  - Thermal Fluid-Structure Interaction in the Effects of Pin-Through-Hole Diameter during Wave Soldering - (2015) Advances in Mechanical Engineering, 2014, pp. 1-13
  - Thermal fluid-structure interaction of PCB configurations during the wave soldering process - (2015) Soldering and Surface Mount Technology, 27(1), pp. 31-44
  - Thermal Impact of Heat Spreader Co-Planarity to Electronic Packaging - (2020) Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 71(1), pp. 1-9
  - Thermal Performance of a Cylindrical Heat Pipe for Different Heat Inputs and Inclination Angles - (2014) Applied Mechanics and Materials, 661, pp. 148-153
  - Thermo-mechanical challenges of reflowed lead-free solder joints in surface mount components: A review - (2016) Soldering and Surface Mount Technology, 28(2), pp. 41-62
  - Thermophysical properties of Al2O3-CuO hybrid nanofluid at different nanoparticle mixture ratio: An experimental approach - (2020) Journal of Molecular Liquids, 313, 113458
  - Thermophysical Properties of Vegetable Oil-Based Hybrid Nanofluids Containing Al2O3- TiO2 Nanoparticles as Insulation Oil for Power Transformers - (2022) Nanomaterials, 12(20)
  - Three Dimensional CFD Conjugate Analysis of Two Inline PLCC Packages Horizontally Mounted - (2004) Journal of Microelectronics and Electronic Packaging, 1(4), pp. 244-260
  - Three-Dimensional CFD Simulation for 8 PLCC Packages Mounted in Line on a Printed Circuit Board - (2008)
  - Three-dimensional CFD simulation of the stencil printing performance of solder paste - (2020) The International Journal of Advanced Manufacturing Technology, 108(9-10)
  - Three-Dimensional Modeling of Mold Filling in Microchip Encapsulation Process With a Matrix-Array Arrangement - (2010) Journal of Electronic Packaging, Transactions of the ASME, 132(1)
  - Three-Dimensional Modelling of Mould Filling in Microchip Encapsulation Process with Matrix Array Arrangement - (2010) Journal of Electronic Packaging, Transactions of the ASME, 132, 014502, pp. 1-6
  - Three-Dimensional Modelling to Study the Effect of Die-Stacking Shape on Mould Filling During Encapsulation of Microelectronic Chips - (2010) IEEE Transactions on Advanced Packaging, 33(2), pp. 438 - 446
  - Three-dimensional numerical and experimental investigations on polymer rheology in meso-scale injection molding - (2010) International Communications in Heat and Mass Transfer, 37(2), pp. 131-139
  - Three-dimensional numerical and experimental investigations on polymer rheology in meso-scale injection molding. - (2009) International Communications in Heat and Mass Transfer, 37(2), pp. 131-139
  - Three-dimensional thermal investigations at board level in a reflow oven using thermal-coupling method - (2012) Soldering and Surface Mount Technology, 24(3), pp. 167-182
  - Time-domain reconstruction using sensitivity coefficients for limited view ultrawide band tomography - (2007) Review of Scientific Instruments: PubMed, 78(8), 084703
  - Transient Natural Convection in a Rectangular Cavity Filled with Porous Medium Heated Discretely at Vertical Wall - (2011)
  - Trends in modeling of porous media combustion - (2010) Progress in Energy and Combustion Science, 36(6), pp. 627-650
  - Two-Dimensional Analysis of Tandem/Staggered Airfoils Using Computational Fluid Dynamics - (2005) International Journal of Mechanical Engineering Education, 33(3), pp. 195-207
  - Two-Phase Stacked Microchannel Heat Sinks for Microelectronics Cooling - (2005) Journal of Microelectronics and Electronic Packaging, 2(2), pp. 122-131
  - Ultra wide band imaging of dielectric in the time domain using sensitivity coefficient based reconstruction - (2007)
  - Underfill process for two parallel plates and flip chip packaging - (2012) International Communications in Heat and Mass Transfer In Press, (8)
  - Validation of three dimensional film cooling modeling on convex surface for gas turbine blade - (2012) International Communications in Heat and Mass Transfer, 39(6), pp. 830–837
  - Viability of Biomass Fueled Steam Turbine Cogeneration with Power Export for an Asian Plywood Industry - (2009) Energy Exploration & Exploitation, 27(3), pp. 213-224
  - Viscosity and rheological behavior of Al2O3-Fe2O3/water-EG based hybrid nanofluid: A new correlation based on mixture ratio - (2023) Journal of Molecular Liquids, 375, 121365
  - Viscosity of Mono vs Hybrid Nanofluids: Measurement and Comparison - (2020) IOP Conference Series Materials Science and Engineering, 852(1), 012086
  - Visualization of Fluid/Structure Interaction in IC Encapsulation - (2012) IEEE Transactions on Components Packaging and Manufacturing Technology Part A Article in press
  - Visualization of Fluid/Structure Interaction in IC Encapsulation. - (2012) IEEE Transactions on Components and Packaging Technologies, 2(8)
  - Visualization of Underfill Flow in Ball Grid Array (BGA) using Particle Image Velocimetry (PIV) - (2018) IOP Conference Series Materials Science and Engineering, 370(1), 012064
  - xperimental study on the cooling performance of high power LED arrays under natural convection - (2013) IOP Conference Series Materials Science and Engineering, 50(1)
- Book
  - Advances in aerospace science and technology - (2017)
  - Advances in Aerospace Science and Technology: Part II - (2019) Nova Science Publishers
- Book Chapter
  - A Key Comparative Study Between a Self-Aspirated and an Air-Induced Porous Medium Burner - (2022) Progress in Engineering Technology IV, pp. 273-281
  - Applications of Porous Media Combustion Technology - (2014) The Role of Colloidal Systems in Environmental Protection, pp.615-633
  - CAD-Based 3D Grain Burnback Analysis for Solid Rocket Motors - (2020) Proceedings of International Conference of Aerospace and Mechanical Engineering 2019, pp.341-348
  - CFD Applications in Electronic Packaging - (2012) Engineering Applications of Computational Fluid Dynamics: International Energy and Environment Foundation (IEEF), 2, pp.97-150
  - Computer simulation of membrane airfoil with fluid/structure interaction - (2017)
  - Effect of Needle Size and Needle Height to Substrate in Encapsulation Process of LED Packaging - (2022) Advanced Materials and Engineering Technologies, pp. 149-156
  - Flow Analysis Inside Coated Porous Media: Konstruktion eines historischen Rentenindex ab Ultimo 1870 bis Ultimo 1959 - (2019) Die Performance deutscher Staatsanleihen, pp.153-160
  - Heat Transfer Coefficient for Synthetic Jet Cooling at Various Distance - (2023) Progress in Engineering Technology V, pp.129-135
  - Performance Analysis of a Coated Porous Medium Burner for Cogeneration - (2022) Progress in Engineering Technology IV, pp. 91-98
  - Solder Paste’s Rheology Data for Stencil Printing Numerical Investigations - (2022) Recent Progress in Lead-Free Solder Technology, Materials Development, Processing and Performances, pp. 299-310
  - Synthetic Jet Study on Resonance Driving Frequency for Electronic Cooling - (2018) Regional Conference on Science, Technology and Social Sciences (RCSTSS 2016), pp. 435-443
  - The Role of Colloidal Systems in Environmental Protection - (2014) Colloids and Materials for the Environment, 1st ed., pp.363-395
  - Thermal Analysis of a Cylindrical Sintered Wick Heat Pipe: Konstruktion eines historischen Rentenindex ab Ultimo 1870 bis Ultimo 1959 - (2019) Die Performance deutscher Staatsanleihen, pp.307-319
  - Three Dimensional Simulation of Filling Process for Stacked-Chip Scale Packages - (2019) Die Performance deutscher Staatsanleihen, pp.1-11
- Conference Paper
  - 3D Simulation of Three-Dimensional Filling Process for Stacked-Chip Scale Packages (S-CSPs) - (2014) Colloquium of Education, Engineering & Technology 2014 (COLEET 2014)
  - A Framework in Determining Optimal Preventive Maintenance Planning Through Discrete Event Simulation - (2014) Proceedings of International Conference on Computational Methods in Engineering and Health Sciences
  - Aerodynamic Performance of Twist Morphing MAV Wing - (2013) International Confernce. on Advances in Mechanical and Robotics Engineering (AMRE2013)
  - Capillary Underfill Process for L-type Dispensing Method - (2016) MyTribos Colloquium for Postgraduates (MTCPG 2016)
  - Comparative Studies of Lattice Boltzmann and Finite Volume Methods on 3D Cavity Problem - (2015) International Conference on Science, Technology and Management (ICSTM 2015)
  - Computational fluid dynamics study of middle turbinectomy - (2012) 2012 International Conference on Biomedical Engineering (ICoBE)
  - Development of wind turbine blade using bamboo fiber composite material - (2023) SIXTH INTERNATIONAL CONFERENCE OF MATHEMATICAL SCIENCES (ICMS 2022): AIP Conference Proceedings
  - Effect of component property and mounting on the flexible printed circuit board electronics in the flow environment - (2012) Planetary Scientific Research Centre (PSRC)International Conference on Automotive and Materials Engineering (ICAME)
  - Effect of Gold Concentration Through A Single Dynamic Wave Soldering Process - (2012) Process, 14th International Conference on Electronic Materials and Packaging
  - Effect of gold concentration through a single dynamic wave soldering process. - (2012) 2012 14th International Conference on Electronic Materials and Packaging (EMAP)
  - Effect of piezoelectric fan height on flow and heat transfer for electronics cooling applications - (2008) International Conference on Electronic Materials and Packaging, 2008. EMAP 2008: IEEE Xplore
  - Effect of stacking chips and fluid/structure interaction simulation in 3D stacked flip-chip encapsulation process - (2012) International Microsystems, Packaging, Assembly and Circuit Technology Conference, pp. 313-318
  - Effect of temperature on flexible printed circuit board layout during reflow soldering process - (2023) SIXTH INTERNATIONAL CONFERENCE OF MATHEMATICAL SCIENCES (ICMS 2022): AIP Conference Proceedings
  - Effect of volume concentration and nanofluid temperature on the thermal conductivity of mono and hybrid Al2O3-TiO2 nanofluid - (2021) PROCEEDINGS OF GREEN DESIGN AND MANUFACTURE 2020: AIP Conference Proceedings, 2339(1), 020079
  - Experimental and Numerical Investigation of Finned Multi Heat Pipe - (2010) 1st Mechanical & Aerospace Engineering Research Colloquium (MAERC 2010)
  - Experimental and numerical investigations of two inline PLCC packages horizontal mounted - (2007) International Conference on Electronic Materials and Packaging, 2007. EMAP 2007: IEEE Xplore
  - Experimental Investigation on Thermal Performance of a Vapour Chamber for Electronic Cooling - (2012) 4th International Conference on Science & Technology: Applications in Industry & Education (ICSTIE 2012)
  - Experimental study on luminous intensity of white LEDs of different configurations. - (2020) 3rd Tarumanagara International Conference of the Applications of Technology and Engineering (TICATE) 2020
  - Flow and Heat Transfer Characteristics for Single Row of Inclined Pins - (2016) Proceedings of the Asian Congress on Gas Turbines ACGT-2016
  - FVM based simulation on multi-stack ball grid array (BGA) - (2016) INTERNATIONAL CONFERENCE ON MATHEMATICS, ENGINEERING AND INDUSTRIAL APPLICATIONS 2016 (ICoMEIA2016): Proceedings of the 2nd International Conference on Mathematics, Engineering and Industrial Applications 2016
  - FVM Based Simulation Study of Different injection types on Flip Chip Pressurized Underfill Encapsulation Process - (2009) The 11th International Conference on Electronics, Materials and Packaging
  - Gold Pre-tinning through Single Dynamic Wave Soldering for Pin Through-Hole and Surface Mount Components - (2015) International Conference on Computer Science, Data Mining and Mechanical Engineering (ICCDMME’2015)
  - Heat Transfer Enhancement using Hybrid Nanofluids - (2017) International Conference on “Recent Trends in Engineering and Technology” (RTET-17)
  - High Temperature Hygroscopic Swelling of Polymers in Electronic Packaging - (2024) 2024 International Conference on Electronics Packaging (ICEP)
  - Investigation of Structural and Aerodynamic Performance of Twist Morphing Wing MAV - (2013) 2013 IEEE Symposium on Business, Engineering and Industrial Applications Investigation
  - Molded underfill (MUF) encapsulation for flip-chip package: A numerical investigation - (2017) PROCEEDING OF THE 3RD INTERNATIONAL CONFERENCE OF GLOBAL NETWORK FOR INNOVATIVE TECHNOLOGY 2016 (3RD IGNITE-2016): Advanced Materials for Innovative Technologies; AIP Conference Proceedings, 1865(1), 040001
  - Natural convection of discrete heating in a cavity filled by porous media for different aspect ratio - (2007) International Conference on Electronic Materials and Packaging, 2007. EMAP 2007: IEEE Xplore
  - Novel Method for Measuring High Temperature Hygroscopic Swelling - (2022) 2022 International Conference on Electronics Packaging (ICEP)
  - Numerical simulation of fluid-structure interaction on flexible PCB with multiple ball grid array components - (2017) ENGINEERING INTERNATIONAL CONFERENCE (EIC) 2016: Proceedings of the 5th International Conference on Education, Concept, and Application of Green Technology; AIP Conference Proceedings, 1818(1), 020018
  - Numerical simulation of non-Newtonian flow for the underfill process in flip chip packaging - (2010) The 12th International Conference on Electronics, Materials and Packaging
  - Numerical simulation of thermal fluid-structure interaction on flexible PCB in reflow soldering atmosphere - (2019) APPLIED PHYSICS OF CONDENSED MATTER (APCOM 2019): IP Conference Proceedings, 2129(1), 020037
  - Optimization of operating conditions of heat pipes BTMS using response surface method - (2018) ADVANCES IN CIVIL ENGINEERING AND SCIENCE TECHNOLOGY: AIP Conference Proceedings, 2020(1), 020083
  - Review of Monoplane Fixed Wing Micro Air Vehicle Design Progress - (2012) THE 4TH INTERNATIONAL CONFERENCE ON SCIENCE & TECHNOLOGY 2012 (ICSTIE2012)
  - SIMULATION OF NON-NEWTONIAN FLUID FLOW THROUGH ENCAPSULATION OF 3-DIMENSIONAL STACKED FLIP-CHIP PACKAGE USING LATTICE BOLTZMANN METHOD - (2015) Proceeding International Conference on Engineering of Tarumanagara, 1
  - Study of Flow Visualization in Stacked-Chip Scale Packages (S-CSP) - (2007) IEEE International Conference on Semiconductor Electronics, 2006. ICSE '06: IEEE Xplore
  - Study of the effect of variation of zirconium content and ageing through precipitation hardening process on mechanical properties of aluminum alloys (Al-Zr) - (2023) SIXTH INTERNATIONAL CONFERENCE OF MATHEMATICAL SCIENCES (ICMS 2022): AIP Conference Proceedings
  - Synthetic jet cooling diaphragm equation of motion characteristic and verification for computational fluid dynamic modelling - (2018) PROCEEDING OF THE 25TH NATIONAL SYMPOSIUM ON MATHEMATICAL SCIENCES (SKSM25): Mathematical Sciences as the Core of Intellectual Excellence; AIP Conference Proceedings, 1974(1), 020103
  - THE EFFECT OF TURBULENCE INTENSITY ON THE AERODYNAMIC PERFORMANCE OF AIRFOILS - (2001) 4th International Conference on Mechanical Engineering (ICME)
  - THE EFFECTS OF TURBULENCE INTENSITY ON THE PERFORMANCE CHARACTERISTICS OF NACA 0015 AND EAGLE 150 AIRFOILS - (2002) Annual Seminar National Science Fellowship (NSF)
  - Thermal analysis of single layer counter flow heat sinks with two phase flow - (2005) Proceedings of 6th Electronics Packaging Technology Conference, 2004. EPTC 2004: IEEE Xplore
  - THERMAL CONTACT RESISTANCE FOR HARD AND SOFT MATING MATERIALS IN A VACUUM ENVIRONMENT - (2006) he Seventeenth International Symposium on Transport Phenomena
  - Thermophysical Properties of Water/EG Based Hybrid Nanofluid Containing CuO-Al 2 O 3 Nanoparticles - (2024) AIP Conference proceedings
  - Three dimensional CFD simulation of non-Newtonian flow for the underfill flow in flip chip packaging - (2010) Tenth International Congress of Fluid Dynamics
  - Three dimensional numerical prediction of epoxy flow during the underfill process in flip chip packaging - (2012) 2012 35th IEEE/CPMT International Electronic Manufacturing Technology Symposium (IEMT): Proceedings of the IEEE/CPMT International Electronics Manufacturing Technology (IEMT) Symposium
  - Three dimensional simulation investigation on aerodynamic performance of USM eFA-1 remotely pilot vehicle - (2005) National Conference on Advances in Mechanical Engineering 2005, 2
- Data
  - 2D Furnace Modeling - (2021) Data
  - 2D Vertical Furnace Model - (2021) Data
  - Furnace Temp and Velocity Contour - (2021) Data
  - Nova 2019 Book ISBN - (2019) Data
  - Nova 2019 Book TOC 1 - (2019) Data
  - Nova 2019 Book TOC 2 - (2019) Data
  - TCPMT.2013.2245944 (1) - (2017) Data
Scopus
- Article
  - 3-D conjugate heat transfer analysis of PLCC packages mounted in-line on a Printed Circuit Board - (2009) International Communications in Heat and Mass Transfer, 36(8), pp. 813–819
  - 3-D numerical modeling and experimental investigation of a partial premix-type porous medium burner using liquefied petroleum gas fuel - (2010) Journal of Porous Media, 13(7), pp. 655–669
  - A brief survey of preparation and heat transfer enhancement of hybrid nanofluids - (2019) Strojniski Vestnik/Journal of Mechanical Engineering: Assoc. of Mechanical Eng. and Technicians of Slovenia, 65(7-8), pp. 441–453
  - A CFD-based experimental analysis on the effect of free stream cooling on the performance of micro processor heat sinks - (2008) International Communications in Heat and Mass Transfer, 35(6), pp. 771–778
  - A computational fluid dynamics analysis of the wave soldering process: Influence of propeller blades on fountain flow - (2015) International Journal of Numerical Methods for Heat and Fluid Flow: Emerald Publishing, 25(5), pp. 1231–1247
  - A cost-effective and economic method for assessing the performance of photovoltaic module enhancing techniques: Analytical and experimental study - (2023) Solar Energy: Elsevier Ltd, 254, pp. 27–41
  - A Detailed Analysis of the Modified Economic Method for Assessing the Performance of Photovoltaic Module Enhancing Techniques - (2023) Sustainability (Switzerland): Multidisciplinary Digital Publishing Institute (MDPI), 15(15), 12028
  - A mesoscale premixed LPG burner with surface combustion in porous ceramic foam - (2011) Energy Sources, Part A: Recovery, Utilization and Environmental Effects, 34(1), pp. 9–18
  - A new method for assessing photovoltaic module cooler based on lifespan effectiveness factor - (2022) Case Studies in Thermal Engineering: Elsevier Ltd, 35, 102126
  - A novel analytical filling time chart for design optimization of flip-chip underfill encapsulation process - (2019) International Journal of Advanced Manufacturing Technology: Springer, 105(7-8), pp. 3521–3530
  - A numerical investigation of laminar hybrid nanofluid flow inside circular straight minitube - (2019) Journal of Advanced Research in Fluid Mechanics and Thermal Sciences: Penerbit Akademia Baru, (2), pp. 275–282
  - A Review of Experimentation of Synthetic Jet Cooling - (2023) Journal of Advanced Research in Fluid Mechanics and Thermal Sciences: Semarak Ilmu Publishing, 109(2), pp. 27–38
  - A Review of Moldflow and Finite Element Analysis Simulation of Chip Scale Packaging (CSP) for Light Emitting Diode (LED) - (2022) Journal of Advanced Research in Fluid Mechanics and Thermal Sciences: Penerbit Akademia Baru, 99(1), pp. 158–173
  - A study on the effect of epoxy molding compound (EMC) rheology during encapsulation of stacked-CHIP scale packages (S-CSP) - (2009) Journal of Reinforced Plastics and Composites, 28(20), pp. 2527–2538
  - Airflow inside the nasal cavity: Visualization using computational fluid dynamics - (2010) Asian Biomedicine: Asian Biomedicine, 4(4), pp. 657–661
  - An economic feasibility assessment of implementing photovoltaic module reflectors under Malaysian meteorological conditions - (2024) Scientific Reports: Nature Research, 14(1), 3349
  - An Experimental Investigation into Mechanical and Thermal Properties of Hybrid Woven Rattan/Glass-Fiber-Reinforced Epoxy Composites - (2022) Polymers: MDPI, 14(24), 5562
  - An experimental investigation of shear strength and adhesion on the chip-substrate joint in LED packaging - (2022) International Journal of Adhesion and Adhesives: Elsevier Ltd, 119, 103272
  - Analysis of biomass-residue-based cogeneration system in palm oil mills - (2003) Biomass and Bioenergy: Elsevier Ltd, 24(2), pp. 117–124
  - Analysis of cold flow fluidization test results for various biomass fuels - (2003) Biomass and Bioenergy, 24(6), pp. 487–494
  - Analysis of encapsulation process in 3D stacked chips with different microbump array - (2012) International Communications in Heat and Mass Transfer, 39(10), pp. 1616–1623
  - Analysis of fluid/structure interaction: Influence of silicon chip thickness in moulded packaging - (2013) Microelectronics Reliability, 53(2), pp. 334–347
  - Analysis Study of Thermal and Exergy Efficiency in Double-Layers Porous Media Combustion Using Different Sizes of Burner: A Comparison - (2024) Pertanika Journal of Science and Technology: Universiti Putra Malaysia Press, 32(2), pp. 481–494
  - Analytical comparisons of standardized nasal cavity - (2014) Journal of Medical Imaging and Health Informatics: American Scientific Publishers, 4(1), pp. 14–20
  - Application of flexible printed circuit board (FPCB) in personal computer motherboards: Focusing on mechanical performance - (2012) Microelectronics Reliability, 52(4), pp. 744–756
  - Application of porous medium burner with micro cogeneration system - (2013) Energy: Elsevier Ltd, 50(1), pp. 131–142
  - Applying numerical method in improving emergency gate design of mengkuang dam - (2017) Advances and Applications in Fluid Mechanics: Pushpa Publishing House, 20(3), pp. 353–362
  - Artificial neural network trained, one dimensional FEM model to predict two phase flow characteristics in mini/micro channels - (2007) International Journal of Heat Exchangers, 8(1), pp. 1–14
  - Backward Compatibility Solder Joint Formation at High Peak Reflow Temperature for Aerospace Applications - (2016) Arabian Journal for Science and Engineering: Springer Verlag, 41(5), pp. 1813–1823
  - Briquetting of palm fibre and shell from the processing of palm nuts to palm oil - (2002) Biomass and Bioenergy, 22(6), pp. 505–509
  - Centrifuge and storage precipitation of TiO2 nanoparticles by the sol-gel method - (2015) Journal of Alloys and Compounds: Elsevier Ltd, 651, pp. 557–564
  - CFD modeling of pin shape effects on capillary flow during wave soldering - (2014) International Journal of Heat and Mass Transfer, 72, pp. 400–410
  - CFD simulation and experimental analysis of flow dynamics and grinding performance of opposed fluidized bed air jet mill - (2011) International Journal of Mineral Processing, 98(1-2), pp. 94–105
  - Characteristic airflow patterns during inspiration and expiration: Experimental and numerical investigation - (2015) Journal of Medical and Biological Engineering: Springer Science and Business Media Deutschland GmbH, 35(3), pp. 387–394
  - Characterization and Evaluation of PIV Illumination System Using High Power Light Emitting Diodes for WaterTank Applications - (2018) Instruments and Experimental Techniques: Pleiades Publishing, 61(3), pp. 436–444
  - Characterization of working fluid in vertically mounted finned U-shape twin heat pipe for electronic cooling - (2012) Energy Conversion and Management, 62, pp. 31–39
  - Combustion characteristics of butane porous burner for thermoelectric power generation - (2015) Journal of Combustion: Hindawi Publishing Corporation, 2015, 121487
  - Comparative assessment of a porous burner using vegetable cooking oil-kerosene fuel blends for thermoelectric and thermophotovoltaic power generation - (2016) Fuel: Elsevier Ltd, 180, pp. 137–147
  - Comparative Study of Pressurized and Capillary Underfill Flow Using Lattice Boltzmann Method - (2019) Arabian Journal for Science and Engineering: Springer Verlag, 44(9), pp. 7627–7652
  - Computational aerodynamic analysis on perimeter reinforced (PR)-compliant wing - (2013) Chinese Journal of Aeronautics, 26(5), pp. 1093–1105
  - Computational Analysis of Polymer Melt Filling in a Medical Mold Cavity During the Injection Molding Process - (2023) Pertanika Journal of Science and Technology: Universiti Putra Malaysia Press, 31(1), pp. 33–49
  - Computational and experimental investigations in a cyclone dust separator - (1997) Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering; SAGE Publications Ltd, 211(4), pp. 247–257
  - Computational fluid dynamic and thermal analysis for BGA assembly during forced convection reflow soldering process - (2012) Soldering and Surface Mount Technology, 24(2), pp. 77–91
  - Computational fluid dynamics study of pull and plug flow boundary condition on nasal airflow - (2013) Biomedical Engineering - Applications, Basis and Communications, 25(4), 1350044
  - Computational fluid dynamics study of the effect of posture on airflow characteristics inside the nasal cavity - (2013) Asian Biomedicine, 7(6), pp. 835–840
  - Computational prediction into staggered film cooling holes on convex surface of turbine blade - (2012) International Communications in Heat and Mass Transfer, 39(9), pp. 1367–1374
  - Computational study of a new scheme for a film-cooling hole on convex surface of turbine blades - (2013) International Communications in Heat and Mass Transfer, 43, pp. 90–99
  - Conjugate film cooling of a new multi-layer convex surface of turbine blades - (2013) International Communications in Heat and Mass Transfer, 45, pp. 86–94
  - Controlling of intermetallic compound solder interconnection-printed circuit board using nickel coating | Pengawalan pertumbuhan sebatian antara logam sambungan pateri-papan litar bercetak menggunakan salutan nikel - (2018) Sains Malaysiana: Penerbit Universiti Kebangsaan Malaysia, 47(9), pp. 2157–2162
  - Correlating scalants characteristic and air bubbling rate in submerged vacuum membrane distillation: A fouling control strategy - (2021) Journal of Membrane Science: Elsevier B.V., 621, 118991
  - Cost and time effective performance evaluation methods for photovoltaic module cooling techniques: Analytical and experimental study - (2022) Applied Energy: Elsevier Ltd, 326, 119940
  - Counter and parallel two-phase flow microchannel heat sinks for electronics cooling - (2006) International Journal of Heat Exchangers, 7(1), pp. 57–74
  - CUF scaling effect on contact angle and threshold pressure - (2017) Soldering and Surface Mount Technology: Emerald Group Publishing Ltd., 29(4), pp. 173–190
  - Design and Fabrication of a Dual Rotor-Embedded Wing Vertical Take-Off and Landing Unmanned Aerial Vehicle - (2021) Unmanned Systems: World Scientific, 9(1), pp. 45–63
  - Design and optimization of piezoelectric fans for cooling of microelectronic devices - (2007) Journal of Microelectronics and Electronic Packaging: IMAPS-International Microelectronics and Packaging Society, 4(3), pp. 121–128
  - Development and performance analysis of novel cast copper-SiC-Gr hybrid composites - (2009) Materials and Design, 30(6), pp. 1957–1965
  - Development of energy efficient porous medium burners on surface and submerged combustion modes - (2011) Energy: Elsevier Ltd, 36(8), pp. 5132–5139
  - Development of flexible wings and flapping mechanism with integrated electronic control system, for micro air vehicle research - (2013) Experimental Techniques, 37(4), pp. 25–37
  - Development of premixed burner based on stabilized combustion within discrete porous medium - (2011) Journal of Porous Media: Begell House Inc., 14(10), pp. 909–917
  - Discrete phase method particle simulation of ultra-fine package assembly with SAC305-TiO2 nano-reinforced lead free solder at different weighted percentages - (2017) Microelectronics Reliability: Elsevier Ltd, 79, pp. 336–351
  - Discrete phase method study of ball grid array underfill process using nano-silica filler-reinforced composite-encapsulant with varying filler loadings - (2017) Microelectronics Reliability: Elsevier Ltd, 72, pp. 45–64
  - Double-layer micro porous media burner from lean to rich fuel mixture: Analysis of entropy generation and exergy efficiency - (2021) Entropy: MDPI, 23(12), 1663
  - Dynamic warpage simulation of molded PCB under reflow process - (2023) Circuit World: Emerald Publishing, 49(2), pp. 202–210
  - Effect of adhesive force on underfill process based on lattice Boltzmann method - (2020) Microelectronics International: Emerald Group Holdings Ltd., 37(1), pp. 54–63
  - Effect of ceramic coating in combustion and cogeneration performance of Al2O3 porous medium - (2016) Journal of the Energy Institute: Elsevier B.V., 89(1), pp. 81–93
  - Effect of contact angle on meniscus evolution and contact line jump of underfill fluid flow in flip-chip encapsulation - (2020) CFD Letters: Penerbit Akademia Baru, 12(6), pp. 28–38
  - Effect of CTAB surfactant on the stability and thermal conductivity of mono and hybrid systems of graphene and FMWCNT nanolubricant - (2022) Colloids and Surfaces A: Physicochemical and Engineering Aspects; Elsevier B.V., 648, 129275
  - Effect of different S AC based nanoparticles types on the reflow soldering process of miniaturized component using discrete phase model simulation - (2019) Journal of Applied Fluid Mechanics: Isfahan University of Technology, 12(5), pp. 1683–1696
  - Effect of different temperature distribution on multi-stack BGA package - (2021) Microelectronics International: Emerald Group Holdings Ltd., 38(2), pp. 33–45
  - Effect of filling level and fillet profile on pin-through-hole solder joint - (2019) International Journal of Advanced Manufacturing Technology: Springer London, 102(5-8), pp. 1467–1485
  - Effect of Heat Pipe’s Configuration in Managing the Temperature of EV Battery - (2023) CFD Letters: Penerbit Akademia Baru, 15(3), pp. 22–34
  - Effect of ILU dispensing types for different solder bump arrangements on CUF encapsulation process - (2016) Microelectronic Engineering: Elsevier B.V., 163, pp. 83–97
  - Effect of piezoelectric fan mode shape on the heat transfer characteristics - (2014) International Communications in Heat and Mass Transfer, 52, pp. 140–151
  - Effect of pin inclination angle on flow and heat transfer characteristics for a row of pins in a flow channel - (2020) International Communications in Heat and Mass Transfer: Elsevier Ltd, 110, 104396
  - Effect of scale size, orientation type and dispensing method on void formation in the CUF encapsulation of BGA - (2018) Sadhana - Academy Proceedings in Engineering Sciences: Springer India, 43(4), 59
  - Effect of side and tip gaps of a piezoelectric fan on microelectronic cooling - (2013) IEEE Transactions on Components, Packaging and Manufacturing Technology, 3(9), pp. 1545–1553, 6509437
  - Effect of skin flexibility on aerodynamic performance of flexible skin flapping wings for micro air vehicles - (2015) Experimental Techniques: Blackwell Publishing Inc., 39(1), pp. 11–20
  - Effect of solder bump shapes on underfill flow in flip-chip encapsulation using analytical, numerical and PIV experimental approaches - (2018) Microelectronics Reliability: Elsevier Ltd, 81, pp. 41–63
  - Effect of solder joint arrangements on BGA lead-free reliability during cooling stage of reflow soldering process - (2012) IEEE Transactions on Components, Packaging and Manufacturing Technology: Institute of Electrical and Electronics Engineers Inc., 2(12), pp. 2098–2107, 6303969
  - Effect of stacking chips and inlet positions on void formation in the encapsulation of 3D stacked flip-chip package - (2012) International Communications in Heat and Mass Transfer, 39(5), pp. 670–680
  - Effect of synchronized piezoelectric fans on microelectronic cooling performance - (2013) International Communications in Heat and Mass Transfer, 43, pp. 81–89
  - Effect of thermocapillary action in the underfill encapsulation of multi-stack ball grid array - (2016) Microelectronics Reliability: Elsevier Ltd, 66, pp. 143–160
  - Effect of TiO2-Al2O3nanoparticle mixing ratio on the thermal conductivity, rheological properties, and dynamic viscosity of water-based hybrid nanofluid - (2020) Journal of Materials Research and Technology: Elsevier Editora Ltda, 9(6), pp. 13781–13792
  - Effect of Ultra-low Vegetable Oil Droplets on Microporous Media Burner Under Surface and Submerged Flames - (2019) Arabian Journal for Science and Engineering: Springer Verlag, 44(6), pp. 5921–5935
  - Effect of vertical stacking dies on flow behavior of epoxy molding compound during encapsulation of stacked-chip scale packages - (2010) Heat and Mass Transfer/Waerme- und Stoffuebertragung, 46(11-12), pp. 1315–1325
  - Effect of Wing Deformation on the Aerodynamic Performance of Flapping Wings: Fluid-Structure Interaction Approach - (2016) Journal of Aerospace Engineering: American Society of Civil Engineers (ASCE), 29(4), 4016006
  - Effects of aspect ratio in moulded packaging considering fluid/structure interaction: A CFD modelling approach - (2017) Journal of Applied Fluid Mechanics: Isfahan University of Technology, 10(6), pp. 1799–1811
  - Effects of diamond nanoparticles reinforcement into lead-free Sn-3.0Ag-0.5Cu solder pastes on microstructure and mechanical properties after reflow soldering process - (2015) Materials and Design: Elsevier Ltd, 82, pp. 206–215
  - Effects of Fe2NiO4 nanoparticles addition into lead free Sn-3.0Ag-0.5Cu solder pastes on microstructure and mechanical properties after reflow soldering process - (2015) Materials and Design: Elsevier Ltd, 67, pp. 197–208
  - Effects of geometry and number of hollow on the performance of rectangular fins in microchannel heat sinks - (2013) Isi Bilimi Ve Teknigi Dergisi/ Journal of Thermal Science and Technology, 33(1), pp. 1–9
  - Effects of outlet vent arrangement on air traps in stacked-chip scale package encapsulation - (2012) International Communications in Heat and Mass Transfer, 39(3), pp. 405–413
  - Effects of PCB thickness on adjustable fountain wave soldering - (2015) Sadhana - Academy Proceedings in Engineering Sciences: Springer India, 40(7), pp. 2197–2220
  - Effects of solder temperature on pin through-hole during wave soldering: Thermal-fluid structure interaction analysis - (2014) Scientific World Journal: Hindawi Publishing Corporation, 2014, 482363
  - Effects of temperature on the wave soldering of printed circuit boards: CFD modeling approach - (2016) Journal of Applied Fluid Mechanics: Isfahan University of Technology, 9(4), pp. 2053–2062
  - Effects of the preheat layer thickness on surface/submerged flame during porous media combustion of micro burner - (2017) Energy: Elsevier Ltd, 122, pp. 103–110
  - Effects of tip gap and amplitude of piezoelectric fans on the performance of heat sinks in microelectronic cooling - (2012) Heat and Mass Transfer/Waerme- und Stoffuebertragung, 48(6), pp. 893–901
  - Empirical Viscosity Modeling for SiO2 and Al2O3Nanofluids using the Response Surface Method - (2020) Journal of Advanced Research in Fluid Mechanics and Thermal Sciences: Penerbit Akademia Baru, 75(3), pp. 63–72
  - Enhancement in cathodic redox reactions of single-chambered microbial fuel cells with castor oil-emitted powder as cathode material - (2021) Materials: MDPI AG, 14(16), 4454
  - Enhancement of nanofluid heat transfer in a mini-tube using SiO2 nanoparticles - (2019) Advances in Materials and Processing Technologies: Taylor and Francis Ltd., 5(4), pp. 607–616
  - Enhancing Closed System Efficiency through CuO Nanofluids: Investigating Thermophysical Properties and Heat Transfer Performance - (2024) Journal of Advanced Research in Fluid Mechanics and Thermal Sciences: Semarak Ilmu Publishing, 117(1), pp. 179–188
  - Entropy generation and exergy analysis of premixed fuel-air combustion in micro porous media burner - (2020) Entropy: MDPI AG, 22(10), pp. 1–18, 1104
  - Experiment and simulation to develop clean porous medium surface combustor using LPG - (2013) Isi Bilimi Ve Teknigi Dergisi/ Journal of Thermal Science and Technology, 33(1), pp. 55–61
  - Experiment on forced convective heat transfer enhancement using MWCNTs/GNPs hybrid nanofluid and mini-tube - (2017) International Journal of Heat and Mass Transfer: Elsevier Ltd, 115, pp. 1121–1131
  - Experimental analysis and FEM simulation of finned U-shape multi heat pipe for desktop PC cooling - (2011) Energy Conversion and Management, 52(8-9), pp. 2937–2944
  - Experimental analysis of a porous burner operating on kerosene-vegetable cooking oil blends for thermophotovoltaic power generation - (2015) Energy Conversion and Management: Elsevier Ltd, 96, pp. 544–560
  - Experimental and numerical investigation of 3D gas flow temperature field in infrared heating reflow oven with circulating fan - (2015) International Journal of Heat and Mass Transfer: Elsevier Ltd, 87, pp. 49–58
  - Experimental and numerical investigation of flow and thermal effects on flexible printed circuit board - (2017) Microelectronics Reliability: Elsevier Ltd, 72, pp. 5–17
  - Experimental and numerical studies of finned L-shape heat pipe for notebook-PC cooling - (2013) IEEE Transactions on Components, Packaging and Manufacturing Technology, 3(6), pp. 978–988, 6509409
  - Experimental and numerical studies of porous media combustion in micro burner - (2018) Journal of Advanced Research in Fluid Mechanics and Thermal Sciences: Penerbit Akademia Baru, 43(1), pp. 112–120
  - Experimental investigation and optimization of heat input and coolant velocity of finned twin U-shaped heat pipe for CPU cooling - (2013) Experimental Techniques, 37(6), pp. 34–40
  - Experimental investigation of aerodynamic performances on a rotating cylinder with surface roughness using light weight smart motor (LWSM) - (2017) Indian Journal of Geo-Marine Sciences: National Institute of Science Communication and Policy Research, 46(8), pp. 1673–1681
  - Experimental investigation of the performance of a liquid fuel-fired porous burner operating on kerosene-vegetable cooking oil (VCO) blends for micro-cogeneration of thermoelectric power - (2015) Renewable Energy: Elsevier Ltd, 74, pp. 505–516
  - Experimental Investigation of Water-Cooled Heat Pipes in the Thermal Management of Lithium-Ion EV Batteries - (2019) Arabian Journal for Science and Engineering: Springer Verlag, 44(9), pp. 7541–7552
  - Experimental investigation on the heat transfer performance of heat pipes in cooling hev lithium-ion batteries - (2018) Heat Transfer Research: Begell House Inc., 49(17), pp. 1745–1760
  - Experimental study of self-alignment during reflow soldering process - (2018) Journal of Advanced Manufacturing Technology: Penerbit Universiti Teknikal Malaysia Melaka, 12(1 Special Issue 2), pp. 355–366
  - Fabrication and study on tribological characteristics of cast copper-TiO2-boric acid hybrid composites - (2009) Materials and Design, 30(5), pp. 1632–1637
  - Fabrication of porcelain foam substrates coated with SiC, Ni, and Cr using the dip-coating technique - (2015) Ceramics International: Elsevier Ltd, 41(2), pp. 2940–2947
  - Feasibility study of cogeneration in a plywood industry with power export to grid - (2009) Applied Energy: Elsevier Ltd, 86(5), pp. 657–662
  - Filling efficiency of flip-chip underfill encapsulation process - (2020) Soldering and Surface Mount Technology: Emerald Group Holdings Ltd., 32(1), pp. 10–18
  - Finite element analysis on the effect of solder joint geometry for the reliability of ball grid array assembly with flexible and rigid PCBS - (2014) Journal of Engineering Science and Technology, 9(1), pp. 47–63
  - Finite volume analysis of pressurized underfill encapsulation process - (2016) ARPN Journal of Engineering and Applied Sciences: Asian Research Publishing Network, 11(1), pp. 166–171
  - Finite volume based CFD simulation of pressurized flip-chip underfill encapsulation process - (2010) Microelectronics Reliability, 50(1), pp. 98–105
  - Finite volume-based simulation of the wave soldering process: Influence of the conveyor angle on pin-through-hole capillary flow - (2016) Numerical Heat Transfer; Part A: Applications; Taylor and Francis Ltd., 69(3), pp. 295–310
  - Flow induced deflection and stress on flexible printed circuit board in fan-cooled electronic systems: FSI approach - (2012) IEEE Transactions on Components, Packaging and Manufacturing Technology, 2(4), pp. 617–624, 6095389
  - Fluid structure interaction of unsteady aerodynamics of flapping wing at low reynolds number - (2013) Engineering Applications of Computational Fluid Mechanics, 7(1), pp. 144–158
  - Fluid-structure interaction analysis on the effect of chip stacking in a 3D integrated circuit package with through-silicon vias during plastic encapsulation - (2014) Microelectronic Engineering, 113, pp. 40–49
  - Fluid/structure interaction analysis of the effects of solder bump shapes and input/output counts on moulded packaging - (2012) IEEE Transactions on Components, Packaging and Manufacturing Technology, 2(4), pp. 604–616, 6092468
  - Fluid/Structure interaction investigation in PBGA packaging - (2012) IEEE Transactions on Components, Packaging and Manufacturing Technology: Institute of Electrical and Electronics Engineers Inc., 2(11), pp. 1786–1795, 6317149
  - Fluid–structure interaction study of IC stacking chips arrangement during encapsulation process - (2019) CFD Letters: Penerbit Akademia Baru, 11(4), pp. 1–15
  - FSI analysis of wire sweep in encapsulation process of plastic ball grid array packaging - (2013) Isi Bilimi Ve Teknigi Dergisi/ Journal of Thermal Science and Technology, 33(1), pp. 101–109
  - FSI implications of EMC rheological properties to 3D IC with TSV structures during plastic encapsulation process - (2013) Microelectronics Reliability, 53(4), pp. 600–611
  - FSI simulation of wire sweep PBGA encapsulation process considering rheology effect - (2012) IEEE Transactions on Components, Packaging and Manufacturing Technology, 2(4), pp. 593–603, 6095610
  - FSI study of the effect of air inlet/outlet arrangements on the reliability and cooling performances of flexible printed circuit board electronics - (2013) Isi Bilimi Ve Teknigi Dergisi/ Journal of Thermal Science and Technology, 33(1), pp. 43–53
  - FVM based numerical study on the effect of solder bump arrangement on capillary driven flip chip underfill process - (2010) International Communications in Heat and Mass Transfer, 37(3), pp. 281–286
  - Hardness profiles of Sn-3.0Ag-0.5Cu-TiO2 composite solder by nanoindentation - (2016) Materials Science and Engineering: A; Elsevier Ltd, 669, pp. 178–186
  - Heat Transfer Analysis of Diffusion Furnace for Wafer Annealing Process - (2020) Journal of Advanced Research in Fluid Mechanics and Thermal Science: Penerbit Akademia Barus, 75(3), pp. 43–53
  - Heat transfer analysis on wafer annealing process in semiconductor multi-wafer furnace using CFD simulation - (2022) Journal of Mechanical Science and Technology: Korean Society of Mechanical Engineers, 36(6), pp. 3143–3151
  - Heat transfer and deformation analysis of flexible printed circuit board under thermal and flow effects - (2020) Circuit World: Emerald Group Holdings Ltd., 47(2), pp. 213–221
  - Heat transfer and entropy generation abilities of MWCNTs/GNPs hybrid nanofluids in microtubes - (2019) Entropy: MDPI AG, 21(5), 480
  - Heat transfer enhancement by flexible printed circuit board's deformation - (2017) International Communications in Heat and Mass Transfer: Elsevier Ltd, 84, pp. 86–93
  - Heat transfer enhancement of LEDs with a combination of piezoelectric fans and a heat sink - (2017) Microelectronics Reliability: Elsevier Ltd, 68, pp. 39–50
  - Heat transfer enhancement using piezoelectric fan in electronic cooling - Experimental and numerical observations - (2012) Isi Bilimi Ve Teknigi Dergisi/ Journal of Thermal Science and Technology, 32(1), pp. 41–50
  - Heat Transfer in a Loop Heat Pipe using Diamond-H2O Nanofluid - (2018) Heat Transfer Engineering: Taylor and Francis Ltd., 39(13-14), pp. 1117–1131
  - Heat Transfer Performance of a Synthetic Jet at Various Driving Frequencies and Diaphragm Amplitude - (2019) Arabian Journal for Science and Engineering: Springer Verlag, 44(2), pp. 1043–1055
  - Heat transfer performance of a synthetic jet generated by diffuser-shaped orifice - (2019) Journal of Advanced Research in Fluid Mechanics and Thermal Sciences: Penerbit Akademia Baru, 53(1), pp. 122–128
  - Husk-fueled steam turbine cogeneration for a rice mill with power exporta case study - (2011) Energy Sources, Part A: Recovery, Utilization and Environmental Effects, 33(8), pp. 724–734
  - Hybrid mesh for nasal airflow studies - (2013) Computational and Mathematical Methods in Medicine: Hindawi Limited, 2013, 727362
  - Impact of the Solar Ventilation System on the Fuel Savings and CO2 Reductions for Gasoline Vehicle Engine Parked Under the Sun - (2023) International Journal on Energy Conversion: Praise Worthy Prize S.r.l, 11(2), pp. 45–55
  - Impacts of impeller blade number on centrifugal pump performance under critical cavitation conditions - (2024) Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering; SAGE Publications Ltd
  - Implications of Adjustable Fountain Wave in Pin Through Hole Soldering Process - (2014) Arabian Journal for Science and Engineering: Springer Verlag, 39(12), pp. 9101–9111
  - Influence of copper pillar bump structure on flip chip packaging during reflow soldering: a numerical approach - (2021) Microelectronics International: Emerald Group Holdings Ltd., 38(4), pp. 172–181
  - Influence of gap height in flip chip underfill process with non-Newtonian flow between two parallel plates - (2012) Journal of Electronic Packaging: American Society of Mechanical Engineers (ASME), 134(1), 011003
  - Influence of low concentration of diamond water nanofluid in loop heat pipe - (2017) International Journal of Heat and Technology: International Information and Engineering Technology Association, 35(3), pp. 539–548
  - Influence of moisture concentration and hydrophobic material on induced stress in FCBGA package under reflow - (2022) Soldering and Surface Mount Technology: Emerald Group Holdings Ltd., 34(2), pp. 103–115
  - Influence of nanofluid on heat transfer in a loop heat pipe - (2013) International Communications in Heat and Mass Transfer, 47, pp. 82–91
  - Influence of Nanoparticles on Thermophysical Properties of Hybrid Nanofluids of Different Volume Fractions - (2022) Nanomaterials: MDPI, 12(15), 2570
  - Influence of oxyhydrogen gas retrofit into two-stroke engine on emissions and exhaust gas temperature variations - (2024) Heliyon: Elsevier Ltd, 10(5), e26597
  - Influence of pin offset in PCB through-hole during wave soldering process: CFD modeling approach - (2013) International Communications in Heat and Mass Transfer, 48, pp. 116–123
  - Influence of printed circuit board thickness in wave soldering - (2017) Scientia Iranica: Sharif University of Technology, 24(6), pp. 2963–2976
  - Influence of PTH offset angle in wave soldering with thermal-coupling method - 92014) Soldering and Surface Mount Technology: Emerald Group Holdings Ltd., 26(3), pp. 97–109
  - Influence of solder bump arrangements on molded IC encapsulation - (2014) Microelectronics Reliability: Elsevier Ltd, 54(4), pp. 796–807
  - Investigation of nano-reinforced lead-free solder during reflow soldering-a molecular dynamic approach - (2020) CFD Letters: Penerbit Akademia Baru, 12(12), pp. 75–84
  - Investigation of Thermodynamic Properties and Stability of Metal Oxide (CuO and Al2 O3)/Deionized Water Nanofluids for Enhanced Heat Transfer Applications - (2024) Journal of Advanced Research in Fluid Mechanics and Thermal Sciences: Semarak Ilmu Publishing, 121(1), pp. 148–172
  - Investigation on nano-reinforced solder paste after reflow soldering part 1: Effects of nano-reinforced solder paste on melting, hardness, spreading rate, and wetting quality - (2018) Microelectronics Reliability: Elsevier Ltd, 84, pp. 230–237
  - Investigations of infrared desktop reflow oven with fpcb substrate during reflow soldering process - (2021) Metals: MDPI AG, 11(8), 1155
  - Laser synthesis route for production of GaN nanocrystals for optical sensor protection - (2024) International Journal of Nanotechnology: Inderscience Publishers, 21(4-5), pp. 251–260
  - Lattice boltzmann and finite volume simulations of multiphase flow in BGA encapsulation process - (2015) ARPN Journal of Engineering and Applied Sciences: Asian Research Publishing Network, 10(17), pp. 7354–7360
  - Lattice Boltzmann method of different BGA orientations on I-type dispensing method - (2016) PLoS ONE: Public Library of Science, 11(7), e0159357
  - Lattice Boltzmann method study of BGA bump arrangements on void formation - (2016) Microelectronics Reliability: Elsevier Ltd, 56, pp. 170–181
  - Lattice Boltzmann method study of effect three dimensional stacking-chip package layout on micro-void formation during encapsulation process - (2016) Microelectronics Reliability: Elsevier Ltd, 65, pp. 205–216
  - Lattice Boltzmann Model of 3D Multiphase Flow in Artery Bifurcation Aneurysm Problem - (2016) Computational and Mathematical Methods in Medicine: Hindawi Limited, 2016, 6143126
  - Lift performance of a cambered wing for aerodynamic performance enhancement of the flapping wing - (2015) Jurnal Teknologi: Penerbit UTM Press, 75(8), pp. 43–47
  - Mathematical modelling of flow and sediment pattern at Ijok Intake, Ijok River, Perak, Malaysia - (2012) International Journal of Modelling and Simulation: Acta Press, 32(3), pp. 165–170
  - Mechanical reliability of self-aligned chip assembly after reflow soldering process - (2021) Soldering and Surface Mount Technology: Emerald Group Holdings Ltd., 33(1), pp. 9–17
  - Microstructure and mechanical properties of Pb-free Sn-3.0Ag-0.5Cu solder pastes added with NiO nanoparticles after reflow soldering process - (2016) Materials and Design: Elsevier Ltd, 90, pp. 499–507
  - Modelling and analysis of the effect of stacking chips with TSVs in 3D IC package encapsulation process - (2012) Maejo International Journal of Science and Technology, 6(2), pp. 159–185
  - Modified methods for assessing photovoltaic solar thermal collectors - (2021) Case Studies in Thermal Engineering: Elsevier Ltd, 28, 101690
  - Multiphase flow in solder paste stencil printing process using CFD approach - (2018) Journal of Advanced Research in Fluid Mechanics and Thermal Sciences: Penerbit Akademia Baru, 46(1), pp. 147–152
  - No-flow underfill: Effect of chip placement speed on the void formation using numerical method - (2021) Microelectronics Journal: Elsevier Ltd, 114, 105139
  - Numerical analysis of nozzle flow and spray characteristics from different nozzles using diesel and biofuel blends - (2019) Energies: MDPI AG, 12(2), 281
  - Numerical analysis on the effects of different inlet gates and gap heights in TQFP encapsulation process - (2011) International Journal of Heat and Mass Transfer, 54(9-10), pp. 1861–1870
  - Numerical and experimental investigations of speaker-driven synthetic jet actuator for electronics cooling applications - (2019) Heat Transfer Research: Begell House Inc., 50(14), pp. 1369–1381
  - Numerical and experimental investigations on effect of fan height on the performance of piezoelectric fan in microelectronic cooling - (2009) International Communications in Heat and Mass Transfer, 36(1), pp. 51–58
  - NUMERICAL ASSESSMENT ON HEAT TRANSFER PERFORMANCE OF DOUBLE-LAYERED OBLIQUE FINS MICRO-CHANNEL HEAT SINK WITH Al2O3 NANOFLUID - (2022) Thermal Science: Serbian Society of Heat Transfer Engineers, 26(1), pp. 477–488
  - Numerical investigation on rheology models during encapsulation of moulded underfill (MUF) for flip-chip package - (2024) Polymer Bulletin: Springer Science and Business Media Deutschland GmbH, 81(3), pp. 2385–2406
  - Numerical Investigation on the Effect of Pressure and Temperature on the Melt Filling During Injection Molding Process - (2016) Arabian Journal for Science and Engineering: Springer Verlag, 41(5), pp. 1907–1919
  - Numerical investigations on the effects of different cooling periods in reflow-soldering process - (2015) Heat and Mass Transfer/Waerme- und Stoffuebertragung: Springer Verlag, 51(10), pp. 1413–1423
  - Numerical modeling and analysis of microbump pitch effect in 3D ic package with tsv during molded underfill (MUF) - (2013) Engineering Applications of Computational Fluid Mechanics, 7(2), pp. 210–222
  - Numerical simulation of self-alignment of chip resistor components for different silver content during reflow soldering - (2017) Microelectronics Reliability: Elsevier Ltd, 79, pp. 69–78
  - Numerical Study of Heat Transfer Characteristics of Laminar Nanofluids Flow in Oblique Finned Microchannel Heat Sink: Effects of Different Base Fluids and Volume Fraction of Nanoparticles - (2020) Journal of Advanced Research in Fluid Mechanics and Thermal Sciences: Penerbit Akademia Baru, 76(3), pp. 25–37
  - Numerical Study of Heat Transfer Enhancement Using Al2O3–Graphene/Water Hybrid Nanofluid Flow in Mini Tubes - (2019) Iranian Journal of Science and Technology, Transaction A: Science; Springer International Publishing, 43(4), pp. 1989–2000
  - Numerical study of inspiratory and expiratory flow in a human nasal cavity - (2011) Journal of Medical and Biological Engineering, 31(3), pp. 201–206
  - Numerical study on hydrodynamic performance of shallow underwater glider platform - (2012) Indian Journal of Marine Sciences, 41(2), pp. 124–133
  - NUMERICAL STUDY ON THE EFFECT OF DIFFERENT VISCOMETER TEST ON STENCIL PRINTING PROCESS - (2022) Jurnal Teknologi: Penerbit UTM Press, 84(6-2), pp. 135–143
  - Numerical study on the influence of nozzle spray shape on spray characteristics using diesel and biofuel blends - (2021) Biofuels: Taylor and Francis Ltd., 12(9), pp. 1109–1121
  - Optimization modeling of the cooling stage of reflow soldering process for ball grid array package using the gray-based Taguchi method - (2012) Microelectronics Reliability, 52(6), pp. 1143–1152
  - Optimization of 3D IC stacking chip on molded encapsulation process: a response surface methodology approach - (2019) International Journal of Advanced Manufacturing Technology: Springer London, 103(1-4), pp. 1139–1153
  - Optimization of aerodynamic efficiency for twist morphing MAV wing - (2014) Chinese Journal of Aeronautics: Chinese Journal of Aeronautics, 27(3), pp. 475–487
  - Optimization of flexible printed circuit board electronics in the flow environment using response surface methodology - (2013) Microelectronics Reliability, 53(12), pp. 1996–2004
  - Optimization of flexible printed circuit board’s cooling with air flow and thermal effects using response surface methodology - (2021) Microelectronics International: Emerald Group Holdings Ltd., 38(4), pp. 182–205
  - Optimization of IC encapsulation considering fluid/structure interaction using response surface methodology - (2012) Simulation Modelling Practice and Theory, 29, pp. 109–122
  - Optimization of pin through hole connector in thermal fluid-structure interaction analysis of wave soldering process using response surface methodology - (2015) Simulation Modelling Practice and Theory: Elsevier B.V., 57, pp. 45–57
  - Optimization of SiO2 nanoparticle mass concentration and heat input on a loop heat pipe - (2015) Case Studies in Thermal Engineering: Elsevier Ltd, 6, pp. 238–250
  - Optimization of the Assessment Method for Photovoltaic Module Enhancers: A Cost-Efficient Economic Approach Developed through Modified Area and Cost Factor - (2024) Processes: Multidisciplinary Digital Publishing Institute (MDPI), 12(5), 988
  - Optimization of the reflow soldering process with multiple quality characteristics in ball grid array packaging by using the grey-based Taguchi method - (2013) Microelectronics International, 30(3), pp. 151–168
  - Optimum tip gap and orientation of multi-piezofan for heat transfer enhancement of finned heat sink in microelectronic cooling - (2012) International Journal of Heat and Mass Transfer, 55(21-22), pp. 5514–5525
  - PACKAGE-ON-PACKAGE (POP) UNDERFILL PROCESS USING A MATERIAL DAM METHOD - (2022) ASEAN Engineering Journal: Penerbit UTM Press, 12(2), pp. 205–210
  - Peltier cooling device (PCD): Assembly and configuration of the device for reducing temperature of building spaces - (2015) Advances in Environmental Biology: American-Eurasian Network for Scientific Information, 9(3), pp. 104–107
  - Performance assessment of a photovoltaic module enhancer: insight into a new lifespan and cost effectiveness factor - (2024) International Journal of Low-Carbon Technologies: Oxford University Press, 19, pp. 257–267
  - Performance of Functionalized MWCNT–Water Nanofluids for Heat Transfer Applications - (2020) Arabian Journal for Science and Engineering: Springer, 45(7), pp. 5603–5614
  - Performance, combustion characteristics and economics analysis of a combined thermoelectric and thermophotovoltaic power system - (2021) Applied Thermal Engineering: Elsevier Ltd, 193, 117051
  - Physical, mechanical, and thermal properties improvement of porous alumina substrate through dip-coating and re-sintering procedures - (2016) Ceramics International: Elsevier Ltd, 42(6), pp. 7717–7729
  - Piezoresistive effects in controllable defective HFTCVD graphene-based flexible pressure sensor - (2015) Scientific Reports: Nature Publishing Group, 5, 14751
  - Plant based energy potential and biomass utilization in Malaysia - (2000) International Energy Journal: Regional Energy Resources Information Center (RERIC), Asian Institute of Technology, 1(2), pp. 77–88
  - Plastic ball grid array encapsulation process simulation on rheology effect - (2011) Telkomnika: Universitas Ahmad Dahlan, 9(1), pp. 27–36
  - Prediction of the void formation in no-flow underfill process using machine learning-based algorithm - (2022) Microelectronics Reliability: Elsevier Ltd, 135, 114586
  - QUAD FLAT NO-LEAD PACKAGE WITH DIFFERENT THERMAL PROFILES AND SOLDER PAD FINISHING FOR VOID MINIMIZATION - (2022) Jurnal Teknologi: Penerbit UTM Press, 84(6-2), pp. 65–75
  - Reflow Optimization Process: Thermal Stress Using Numerical Analysis and Intermetallic Spallation in Backwards Compatibility Solder Joints - (2015) Arabian Journal for Science and Engineering: Springer Verlag, 40(6), pp. 1669–1679
  - Regional segregation with spatial considerations-based analytical filling time model for non-newtonian power-law underfill fluid in flip-chip encapsulation - (2019) Journal of Electronic Packaging: American Society of Mechanical Engineers (ASME), 141(4), 041009
  - Revolutionizing photovoltaic excellence: Unveiling a cutting-edge approach to assessing module enhancers for optimal area and cost efficiency - (2024) Case Studies in Thermal Engineering: Elsevier Ltd, 55, 104139
  - SAC105 Stencil printing process using cross viscosity model - (2019) Journal of Advanced Research in Fluid Mechanics and Thermal Sciences: Penerbit Akademia Baru, 54(1), pp. 70–77
  - Sago starch as binder and pore-forming agent for the fabrication of porcelain foam - (2014) Ceramics International, 40(3), pp. 4777–4784
  - Selected water thermal properties from molecular dynamics for engineering purposes - (2021) Journal of Molecular Liquids: Elsevier B.V., 324, 114703
  - Soldering characteristics and thermomechanical properties of Pb-free solder paste for reflow soldering - (2019) Journal of Advanced Manufacturing Technology: Penerbit Universiti Teknikal Malaysia Melaka, 13(2), pp. 45–56
  - Stability, thermal conductivity and rheological properties of graphene and MWCNT in nanolubricant using additive surfactants - (2021) Case Studies in Thermal Engineering: Elsevier Ltd, 28, 101607
  - Standardization of Malaysian adult female nasal cavity - (2013) Computational and Mathematical Methods in Medicine: Hindawi Limited, 2013, 519071
  - Stencil printing process performance on various aperture size and optimization for lead-free solder paste - (2019) International Journal of Advanced Manufacturing Technology: Springer London, 102(9-12), pp. 3369–3379
  - Study of Different Dispensing Patterns of No-Flow Underfill Using Numerical and Experimental Methods - (2021) Journal of Electronic Packaging: American Society of Mechanical Engineers (ASME), 143(3), 031005
  - Study of flow visualization in stacked-Chip Scale Packages (S-CSP) - (2007) International Communications in Heat and Mass Transfer, 34(7), pp. 820–828
  - Study of velocity profiles of orbal biological system (OBS) using computational fluid dynamics (CFD) - (2019) Journal of Computational Methods in Sciences and Engineering: IOS Press, 19(2), pp. 447–454
  - Study on convective heat transfer and pressure drop of MWCNTs/water nanofluid in mini-tube - (2019) Journal of Thermal Analysis and Calorimetry: Springer Netherlands, 135(1), pp. 123–132
  - Study on the addition of nanoparticles in the lead-free solder during reflow soldering via numerical simulation-A review - (2020) CFD Letters: Penerbit Akademia Baru, 12(5), pp. 111–119
  - Study on the effect of number of film cooling rows on the thermal performance of gas turbine blade - (2012) Isi Bilimi Ve Teknigi Dergisi/ Journal of Thermal Science and Technology, 32(2), pp. 89–98
  - Study on the effect of stack thickness during encapsulation of stacked-chip scale packages (S-CSP) - (2008) Journal of Microelectronics and Electronic Packaging: IMAPS-International Microelectronics and Packaging Society, 5(2), pp. 62–67
  - Study on the fluid-structure interaction of flexible printed circuit board electronics in the flow environment - (2012) IEEE Transactions on Components, Packaging and Manufacturing Technology, 2(8), pp. 1335–1345, 6236103
  - Study on the fluid-structure interaction of flexible printed circuit board motherboard in personal computer casings - (2013) Microelectronics International, 30(3), pp. 138–150
  - Study on the fluid/structure interaction at different inlet pressures in molded packaging - (2011) Microelectronic Engineering, 88(10), pp. 3182–3194
  - Study on the Fluid–Structure Interaction at Different Layout of Stacked Chip in Molded Packaging - (2017) Arabian Journal for Science and Engineering: Springer Verlag, 42(11), pp. 4743–4757
  - Symmetrical unit-cell numerical approach for flip-chip underfill flow simulation - (2020) CFD Letters: Penerbit Akademia Baru, 12(8), pp. 55–63
  - The developing plane channel flow over water-repellent surface containing transverse grooves and ribs - (2018) Journal of Advanced Research in Fluid Mechanics and Thermal Sciences: Penerbit Akademia Baru, 45(1), pp. 141–148
  - The development and performance analysis of partially premixed LPG porous medium combustor - (2011) Energy Sources, Part A: Recovery, Utilization and Environmental Effects, 33(13), pp. 1260–1270
  - The Effect of Freestream Flow Velocities on the Flexible Printed Circuit Board with Different BGA Package Arrangements - (2017) Arabian Journal for Science and Engineering: Springer Verlag, 42(5), pp. 2075–2086
  - The effect of sago as binder in the fabrication of alumina foam through the polymeric sponge replication technique - (2015) Journal of the European Ceramic Society: Elsevier Ltd, 35(6), pp. 1905–1914
  - The effect of sintering conditions on the microstructure and electrical properties of Pb(Zr0.52Ti0.48)O3 ceramic - (2014) Journal of Mechanical Engineering and Sciences: Universiti Malaysia Pahang, 6, pp. 901–906
  - The heat transfer performance of gold/water nanofluid flows in minitube using thermal lattice boltzmann method - (2016) Pertanika Journal of Science and Technology: Universiti Putra Malaysia Press, 24(2), pp. 423–438
  - Thermal analysis of dual piezoelectric fans for cooling multi-LED packages - (2014) Microelectronics Reliability: Elsevier Ltd, 54(8), pp. 1534–1543
  - Thermal analysis of micro-channel heat exchangers with two-phase flow using FEM - (2005) International Journal of Numerical Methods for Heat and Fluid Flow, 15(1), pp. 43–60
  - Thermal fluid-structure interaction in the effects of pin-through-hole diameter during wave soldering - (2014) Advances in Mechanical Engineering: Hindawi Publishing Corporation, 2014, 275735
  - Thermal fluid-structure interaction of PCB configurations during the wave soldering process - (2015) Soldering and Surface Mount Technology: Emerald Group Holdings Ltd., 27(1), pp. 31–44
  - Thermal impact of heat spreader co-planarity to electronic packaging - (2020) Journal of Advanced Research in Fluid Mechanics and Thermal Sciences: Penerbit Akademia Baru, 71(1), pp. 1–9
  - Thermophysical properties of Al2O3-CuO hybrid nanofluid at different nanoparticle mixture ratio: An experimental approach - (2020) Journal of Molecular Liquids: Elsevier B.V., 313, 113458
  - Thermophysical Properties of Vegetable Oil-Based Hybrid Nanofluids Containing Al2O3-TiO2 Nanoparticles as Insulation Oil for Power Transformers - (2022) Nanomaterials: MDPI, 12(20), 3621
  - Three-dimensional CFD simulation of the stencil printing performance of solder paste - (2020) International Journal of Advanced Manufacturing Technology: Springer, 108(9-10), pp. 3351–3359
  - Three-dimensional modeling of mold filling in microchip encapsulation process with a matrix-array arrangement - (2010) Journal of Electronic Packaging: American Society of Mechanical Engineers(ASME), 132(1), pp. 0145021–0145026
  - Three-dimensional modelling to study the effect of die-stacking shape on mould filling during encapsulation of microelectronic chips - (2010) IEEE Transactions on Advanced Packaging, 33(2), pp. 438–446, 5447801
  - Three-dimensional numerical and experimental investigations on polymer rheology in meso-scale injection molding - (2010) International Communications in Heat and Mass Transfer, 37(2), pp. 131–139
  - Three-dimensional thermal investigations at board level in a reflow oven using thermal-coupling method - (2012) Soldering and Surface Mount Technology, 24(3), pp. 167–182
  - Two-dimensional analysis of tandem/staggered airfoils using computational fluid dynamics - (2005) International Journal of Mechanical Engineering Education, 33(3), pp. 195–207
  - Two-phase stacked microchannel heat sinks for microelectronics cooling - (2005) Journal of Microelectronics and Electronic Packaging: IMAPS-International Microelectronics and Packaging Society, 2(2), pp. 122–131
  - Underfill process for two parallel plates and flip chip packaging - (2012) International Communications in Heat and Mass Transfer, 39(8), pp. 1205–1212
  - Unsteady pressure distribution of a flapping wing undergoing root flapping motion with elbow joint at different reduced frequencies - (2017) International Review of Aerospace Engineering: Praise Worthy Prize S.r.l, 10(3), pp. 105–113
  - Validation of three dimensional film cooling modeling on convex surface for gas turbine blade - (2012) International Communications in Heat and Mass Transfer, 39(6), pp. 830–837
  - Viability of biomass fueled steam turbine cogeneration with power export for an Asian plywood industry - (2009) Energy Exploration and Exploitation, 27(3), pp. 213–224
  - Viscosity and rheological behavior of Al2O3-Fe2O3/water-EG based hybrid nanofluid: A new correlation based on mixture ratio - (2023) Journal of Molecular Liquids: Elsevier B.V., 375, 121365
  - Visualization of fluid/structure interaction in IC encapsulation - (2012) IEEE Transactions on Components, Packaging and Manufacturing Technology, 2(8), pp. 1239–1246, 6217396
- Book
  - Advances in aerospace science and technology - (2017) Advances in Aerospace Science and Technology: Nova Science Publishers, Inc., pp. 1–276
  - ADVANCES IN AEROSPACE SCIENCE AND TECHNOLOGY: PART II - (2019) Advances in Aerospace Science and Technology: Part II; Nova Science Publishers, Inc., pp. 1–226
- Book Chapter
  - A Key Comparative Study Between a Self-Aspirated and an Air-Induced Porous Medium Burner - (2022) Advanced Structured Materials: Springer Science and Business Media Deutschland GmbH, 169, pp. 273–281
  - APPLICATION OF HIGH-PERFORMANCE INTERCONNECTION IN AEROSPACE TECHNOLOGY - (2019) Advances in Aerospace Science and Technology: Part II; Nova Science Publishers, Inc., pp. 1–34
  - Applications of Porous Media Combustion Technology - (2014) The Role of Colloidal Systems in Environmental Protection: Elsevier Inc., pp. 615–633
  - Combustion in porous inert media - (2010) Combustion Synthesis: Novel Routes to Novel Materials; Bentham Science Publishers Ltd., pp. 195–205
  - Computer simulation of membrane airfoil with fluid/structure interaction - (2017) Advances in Aerospace Science and Technology: Nova Science Publishers, Inc., pp. 235–257
  - Effect of Needle Size and Needle Height to Substrate in Encapsulation Process of LED Packaging - (2022) Advanced Structured Materials: Springer Science and Business Media Deutschland GmbH, 162, pp. 149–156
  - Flow analysis inside coated porous media - (2019) Advanced Structured Materials: Springer Verlag, 102, pp. 153–160
  - Heat Transfer Coefficient for Synthetic Jet Cooling at Various Distance - (2023) Advanced Structured Materials: Springer Science and Business Media Deutschland GmbH, 183, pp. 129–135
  - Performance Analysis of a Coated Porous Medium Burner for Cogeneration - (2022) Advanced Structured Materials: Springer Science and Business Media Deutschland GmbH, 169, pp. 91–98
  - Solder Paste’s Rheology Data for Stencil Printing Numerical Investigations - (2022) Topics in Mining, Metallurgy and Materials Engineering: Springer Science and Business Media Deutschland GmbH, pp. 299–310
  - Thermal analysis of a cylindrical sintered wick heat pipe - (2019) Advanced Structured Materials: Springer Verlag, 102, pp. 307–319
  - Three dimensional simulation of filling process for stacked-chip scale packages - (2019) Advanced Structured Materials: Springer Verlag, 102, pp. 1–11
- Conference Paper
  - A Comparison of ANFIS and MLR Models in Predicting the Efficiencies of Hybrid Photovoltaic Thermal System (PV/T) System - (2023) AIP Conference Proceedings: American Institute of Physics Inc., 2959(1), 070001
  - A practical approach in porous medium combustion for domestic application: A review - (2018) IOP Conference Series: Materials Science and Engineering: Institute of Physics Publishing, 370(1), 012004
  - A study on thermoforming process of stretchable circuit and its performance in manufacturing of automotive lighting - (2017) AIP Conference Proceedings: American Institute of Physics Inc., 1901, 110006
  - Analysis of LED wire bonding during encapsulation process - (2020) IOP Conference Series: Materials Science and Engineering: IOP Publishing Ltd, 1007(1), 012173
  - Assessment of porous media burner for surface/submerged flame during porous media combustion - (2017) AIP Conference Proceedings: American Institute of Physics Inc., 1818, 020020
  - Assessment of porous media combustion with foam porous media for surface/submerged flame - (2018) Materials Today: Proceedings; Elsevier Ltd, 5(10), pp. 20865–20873
  - Cad-based 3d grain burnback analysis for solid rocket motors - (2020) Lecture Notes in Mechanical Engineering: Springer Science and Business Media Deutschland GmbH, pp. 341–348
  - Comparative Study of the Scaling Effect on Pressure Profiles in Capillary Underfill Process - (2017) IOP Conference Series: Materials Science and Engineering; Institute of Physics Publishing, 203(1), 012012
  - Comparative study on porous media combustion characteristics using different discrete materials - (2018) MATEC Web of Conferences: EDP Sciences, 153, 01007
  - Computational fluid dynamics study of middle turbinectomy - (2012) 2012 International Conference on Biomedical Engineering, ICoBE 2012, pp. 338–341, 6179034
  - Design of chainless bicycle transmission system using four linkages mechanism - (2020) IOP Conference Series: Materials Science and Engineering; IOP Publishing Ltd, 1007(1), 012167
  - Development of foam porous media to undergo surface and submerged flame during premixed combustion - (2019) IOP Conference Series: Materials Science and Engineering; Institute of Physics Publishing, 505(1), 012123
  - Development of Wind Turbine Blade Using Bamboo Fiber Composite Material - (2023) AIP Conference Proceedings: American Institute of Physics Inc., 2680(1), 020044
  - Discrete Phase Model (DPM) study of nano-reinforced Lead Free Solder Sn-3.0Ag-0.5Cu (SAC305) - (2018) IOP Conference Series: Materials Science and Engineering; Institute of Physics Publishing, 370(1), 012067
  - Effect of gold concentration through a single dynamic wave soldering process - (2012) 14th International Conference on Electronic Materials and Packaging, EMAP 2012, 6507859
  - Effect of inclined angle of pin arrays on flow and heat transfer characteristics in flow channel - (2018) International Heat Transfer Conference: Begell House Inc., 2018-August, pp. 5601–5610
  - Effect of piezoelectric fan height on flow and heat transfer for electronics cooling applications - (2008) 2008 10th International Conference on Electronic Materials and Packaging, EMAP 2008, pp. 165–170, 4784255
  - Effect of stacking chips and fluid/structure interaction simulation in 3D stacked flip-chip encapsulation process - (2012) Proceedings of Technical Papers - International Microsystems, Packaging, Assembly, and Circuits Technology Conference, IMPACT, pp. 127–132, 6420218
  - Effect Of Temperature On Flexible Printed Circuit Board Layout During Reflow Soldering Process - (2023) AIP Conference Proceedings: American Institute of Physics Inc., 2680(1), 020209
  - Effect of the gap height of radial gate on the volumetric flow rate in dam - (2018) IOP Conference Series: Materials Science and Engineering; Institute of Physics Publishing, 370(1), 012062
  - Effect of volume concentration and nanofluid temperature on whe thermal conductivity of mono and hybrid Al2O3-TiO2 nanofluid - (2021) AIP Conference Proceedings: American Institute of Physics Inc., 2339, 020079
  - Evaluation of Stability and Enhancement of Nano Fluid Methods - (2024) Journal of Physics: Conference Series: Institute of Physics, 2688(1), 012016
  - Experiential study on temperature and emission performance of micro burner during porous media combustion - (2018) IOP Conference Series: Materials Science and Engineering; Institute of Physics Publishing, 370(1), 012057
  - Experimental analysis and FEM simulation of loop heat pipe charged with diamond nanofluid for desktop PC cooling - (2015) IOP Conference Series: Materials Science and Engineering; Institute of Physics Publishing, 88(1), 012038
  - Experimental analysis and FEM simulation of novel finned loop heat pipe - (2014) Advanced Materials Research: Trans Tech Publications, 925, pp. 481–485
  - Experimental analysis on combustion eharaeteristies of single layer porous media for various burner sizes - (2020) IOP Conference Series: Materials Science and Engineering; Institute of Physics Publishing, 852(1), 012085
  - Experimental and numerical investigations of two inline PLCC packages horizontal mounted - (2007) EMAP 2007 - International Conference on Electronic Materials and Packaging 2007, 4510321
  - Experimental model to optimize the design of cylindrical heat pipes for solar collector application - (2013) Applied Mechanics and Materials, 393, pp. 735–740
  - Experimental study on luminous intensity of white LEDs of different configurations - (2020) IOP Conference Series: Materials Science and Engineering; IOP Publishing Ltd, 1007(1), 012145
  - Experimental study on the cooling performance of high power LED arrays under natural convection - (2013) IOP Conference Series: Materials Science and Engineering, 50(1), 012030
  - Experimental study on the effect of skin flexibility on aerodynamic performance of flapping wings for micro air vehicles - (2014) Applied Mechanics and Materials: Trans Tech Publications Ltd, 629, pp. 18–23
  - Finite Volume Method Study on Contact Line Jump Phenomena and Dynamic Contact Angle of Underfill Flow in Flip-Chip of Various Bump Pitches - (2019) IOP Conference Series: Materials Science and Engineering; Institute of Physics Publishing, 530(1), 012012
  - Flow Behavior Analysis of Emc in Molded Underfill (Muf) Encapsulation for Multi Flip-Chip Package - (2018) Journal of Physics: Conference Series; Institute of Physics Publishing, 1082(1), 012015
  - Fluid/structure interaction study on the variation of radial gate's gap height in dam - (2018) IOP Conference Series: Materials Science and Engineering; Institute of Physics Publishing, 370(1), 012063
  - FVM based simulation on multi-stack ball grid array (BGA) - (2016) AIP Conference Proceedings: American Institute of Physics Inc., 1775, 030094
  - Heat Transfer in a Loop Heat Pipe Using Fe2NiO4-H2O Nanofluid - (2017) MATEC Web of Conferences: EDP Sciences, 109, 05001
  - High Temperature Hygroscopic Swelling of Polymers in Electronic Packaging - (2024) 2024 International Conference on Electronics Packaging, ICEP 2024: Institute of Electrical and Electronics Engineers Inc., pp. 59–60
  - Improvement of porous porcelain through glaze coating - (2016) Materials Science Forum: Trans Tech Publications Ltd, 840, pp. 19–23
  - Influence of Material Properties on the Fluid-Structure Interaction aspects during Molded Underfill Process - (2017) MATEC Web of Conferences: EDP Sciences, 97, 01059
  - Influence of reaction layer thickness on surface/submerged flame during porous media combustion of micro burner - (2019) IOP Conference Series: Materials Science and Engineering; Institute of Physics Publishing, 508(1), 012072
  - Investigation of micro burner performance during porous media combustion for surface and submerged flames - (2018) IOP Conference Series: Materials Science and Engineering; Institute of Physics Publishing, 370(1), 012049
  - Investigation of the fluid/structure interaction phenomenon in IC packaging - (2012) Microelectronics Reliability, 52(1), pp. 241–252
  - LDA measurement on a modified cyclone - (1995) American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FED: ASME, 229, pp. 395–403
  - Lead-free solder SAC 305 volume reduction and cold slump after stencil printing process - (2020) IOP Conference Series: Materials Science and Engineering; Institute of Physics Publishing, 852(1), 012084
  - Molded underfill (MUF) encapsulation for flip-chip package: A numerical investigation - (2017) AIP Conference Proceedings: American Institute of Physics Inc., 1865, 040001
  - Molecular dynamics simulation of the nano- reinforced lead-free solder at different reflow soldering process temperature - (2019) IOP Conference Series: Materials Science and Engineering; IOP Publishing Ltd, 701(1), 012014
  - Nanofluid-filled heat pipes in managing the temperature of EV lithium-ion batteries - (2019) Journal of Physics: Conference Series: Institute of Physics Publishing, 1349(1), 012123
  - Natural convection of discrete heating in a cavity filled by porous media for different aspect ratio - (2007) EMAP 2007 - International Conference on Electronic Materials and Packaging 2007, 4510322
  - Numerical Investigation on the Effect of Squeegee Angle during Stencil Printing Process - (2018) Journal of Physics: Conference Series; Institute of Physics Publishing, 1082(1), 012057
  - Numerical investigations of membrane surface effects on NACA 643-218 airfoil - (2014) Applied Mechanics and Materials: Trans Tech Publications Ltd, 564, pp. 60–65
  - Numerical simulation of fluid-structure interaction on flexible PCB with multiple ball grid array components - (2017) AIP Conference Proceedings: American Institute of Physics Inc., 1818, 020018
  - Numerical simulation of thermal fluid-structure interaction on flexible PCB in reflow soldering atmosphere - (2019) AIP Conference Proceedings: American Institute of Physics Inc., 2129, 020037
  - Optimization of operating conditions of heat pipes BTMS using response surface method - (2018) AIP Conference Proceedings: American Institute of Physics Inc., 2020, 020083
  - Scaling Effect on Velocity Profiles in Capillary Underfill Flow - (2017) IOP Conference Series: Materials Science and Engineering; Institute of Physics Publishing, 203(1), 012013
  - Simulation study on the production of nano-sized materials at mixing stage - (2014) Advanced Materials Research, 832, pp. 118–123
  - Strength analysis for designing a bicycle transmission system without chain - (2020) IOP Conference Series: Materials Science and Engineering; IOP Publishing Ltd, 1007(1), 012168
  - Study of flow visualization in Stacked-Chip Scale packages (S-CSP) - (2006) IEEE International Conference on Semiconductor Electronics, Proceedings, ICSE, pp. 586–590, 4266682
  - Study of The Effect of Variation of Zirconium Content and Ageing Through Precipitation Hardening Process on Mechanical Properties of Aluminum Alloys (Al-Zr) - (2023) AIP Conference Proceedings: American Institute of Physics Inc., 2680(1), 020043
  - Synthetic jet cooling diaphragm equation of motion characteristic and verification for computational fluid dynamic modelling - (2018) AIP Conference Proceedings: American Institute of Physics Inc., 1974, 020103
  - Temperature Prediction on Flexible Printed Circuit Board in Reflow Oven Soldering for Motherboard Application - (2019) IOP Conference Series: Materials Science and Engineering; Institute of Physics Publishing, 530(1), 012019
  - The effect of morphing force on aerodynamic performances of TM wing - (2014) Advanced Materials Research: Trans Tech Publications Ltd, 980, pp. 102–106
  - Thermal analysis of single layer counter flow heat sinks with two phase flow - (2004) Proceedings of 6th Electronics Packaging Technology Conference, EPTC 2004, pp. 559–563, E5.2
  - Thermal performance of a cylindrical heat pipe for different heat inputs and inclination angles - (2014) Applied Mechanics and Materials: Trans Tech Publications Ltd, 661, pp. 148–153
  - Thermophysical properties of water/EG based hybrid nanofluid containing CuO-Al2O3nanoparticles - (2024) AIP Conference Proceedings: American Institute of Physics, 2750(1), 070005
  - Three dimensional numerical prediction of epoxy flow during the underfill process in flip chip packaging - (2012) Proceedings of the IEEE/CPMT International Electronics Manufacturing Technology (IEMT) Symposium, 6521810
  - Three-dimensional mold flow in Stacked-Chip Scale Packages (S-CSP) - (2006) Proceedings of the IEEE/CPMT International Electronics Manufacturing Technology (IEMT) Symposium, pp. 135–142, 4456445
  - Viscosity of mono vs hybrid nanofluids: Measurement and comparison - (2020) IOP Conference Series: Materials Science and Engineering; Institute of Physics Publishing, 852(1), 012086
  - Visualization of Underfill Flow in Ball Grid Array (BGA) using Particle Image Velocimetry (PIV) - (2018) IOP Conference Series: Materials Science and Engineering; Institute of Physics Publishing, 370(1), 012064
- Editorial
  - Message from the Local Chair - (2018) Proceedings - 2018 3rd International Conference on Control, Robotics and Cybernetics, CRC 2018: Institute of Electrical and Electronics Engineers Inc., pp. IX, 8779997
  - PREFACE - (2019) Advances in Aerospace Science and Technology: Part II; Nova Science Publishers, Inc., pp. vii–viii
- Erratum
  - Correction to: A Proposed Temperature-Dependent Photovoltaic Efficiency Difference Factor for Evaluating Photovoltaic Module Cooling Techniques in Natural or Forced Fluid Circulation Mode - (2019) Arabian Journal for Science and Engineering: Springer Science and Business Media Deutschland GmbH, 44, 9, pp. 8123-8128
  - Corrigendum to Combustion in porous media and its applications - A comprehensive survey - (2009) Journal of Environmental Management: Academic Press, 91(2), pp. 550
- Review
  - A review of combustion-driven thermoelectric (TE) and thermophotovoltaic (TPV) power systems - (2017) Renewable and Sustainable Energy Reviews: Elsevier Ltd, 71, pp. 572–584
  - A review of investigations on liquid fuel combustion in porous inert media - (2009) Progress in Energy and Combustion Science, 35(2), pp. 216–230
  - Applications of porous media combustion technology - A review - (2009) Applied Energy: Elsevier Ltd, 86(9), pp. 1365–1375
  - Combustion in porous media and its applications - A comprehensive survey - (2009) Journal of Environmental Management: Academic Press, 90(8), pp. 2287–2312
  - Cutting-edge developments in active and passive photovoltaic cooling for reduced temperature operation - (2024) Results in Engineering: Elsevier B.V., 23, 102662
  - Design Optimization of Solid Rocket Propulsion: A Survey of Recent Advancements - (2020) Journal of Spacecraft and Rockets: American Institute of Aeronautics and Astronautics Inc., 57(1), pp. 3–11
  - Die attachment, wire bonding, and encapsulation process in LED packaging: A review - (2021) Sensors and Actuators, A: Physical; Elsevier B.V., 329, 112817
  - Effects of Blade Number on the Centrifugal Pump Performance: A Review - (2022) Arabian Journal for Science and Engineering: Springer Science and Business Media Deutschland GmbH, 47(7), pp. 7945–7961
  - Metal oxide nanofluids in electronic cooling: a review - (2020) Journal of Materials Science: Materials in Electronics: Springer, 31(6), pp. 4381–4398
  - Overview of the Important Factors Influencing the Performance of Eco-Friendly Brake Pads - (2022) Polymers: MDPI, 14(6), 1180
  - Recent advances on thermally conductive adhesive in electronic packaging: A review - (2021) Polymers: MDPI, 13(19), 3337
  - Recent fluid-structure interaction modeling challenges in IC encapsulation - A review - (2014) Microelectronics Reliability: Elsevier Ltd, 54(8), pp. 1511–1526
  - Review: A critical overview of limitations of cfd modeling in nasal airflow - (2012) Journal of Medical and Biological Engineering, 32(2), pp. 77–84
  - Single-phase heat transfer enhancement in micro/minichannels using nanofluids: Theory and applications - (2016) Applied Energy: Elsevier Ltd, 164, pp. 733–755
  - Thermo-mechanical challenges of reflowed lead-free solder joints in surface mount components: A review - (2016) Soldering and Surface Mount Technology: Emerald Group Publishing Ltd., 28(2), pp. 41–62
  - Trends in modeling of porous media combustion - (2010) Progress in Energy and Combustion Science: Elsevier Ltd, 36(6), pp. 627–650

Engineering Library USM @ 2017