(For USM Staff/Student Only)
|
The Researcher page ofProfessor Dr. Zaidi Mohd Ripin |
Professor Dr. Zaidi Mohd Ripin
Researcher Information
Title:
Professor Dr. Zaidi Mohd Ripin
Department(s):
School of Mechanical Engineering
Location:
Engineering Campus Universiti Sains Malaysia
Phone:
604599 6359/6346
Email:
mezaidi@usm.my
Fax:
604599 6359/6346
Links
USM Experts
Scopus ID
Google Scholar ID
ResearchGate ID
Researcher ID
Qualifications:
B.Eng., Mechanical (UTM),
M.Sc., Mechanical Engineering,
Ph.D. Mechanical Engineering (Leeds, UK).
Expertise:
Stress Analysis,
Noise & Vibration, Finite Element Analysis,
Design for Modularity,
Rubber Seal Technologies,
Thermal Stress Analysis & Reliability,
Analysis for Electronic Packaging.
Current position: Lecturer of Universiti Sains Malaysia, School of Mechanical Engineering
Research
- Google Scholar
- Article
632. Transient analysis of drum brake squeal with binary flutter and negative friction-velocity instability mechanisms - (2011) Journal of Vibroengineering: Vibroengineering, 13 (2), pp. 275-287
- A COMPARATIVE STUDY OF QUALITATIVE AND QUANTITATIVE MODULE IDENTIFICATION METHOD: A CASE STUDY - (2003) Jurnal Mekanikal
- A friction model for dry contacts during metal-forming processes - (2010) The International Journal of Advanced Manufacturing Technology: Springer-Verlag, 51, pp. 93-102
- A methodology to evaluate design efficiency based on assembly criteria in support of design for modularity - (2005) Journal of the Institution of Engineers, 66, pp. 34-40
- A METHODOLOGY TO EVALUATE DESIGN EFFICIENCY BASED ON ASSEMBLY CRITERIA IN SUPPORT OF DESIGN FOR MODULARITY. - (2005) Joumal - The Institution of Engineers, Malaysia, 66 (1), 34-40
- A process capture method for patient transfer processes - (2023) AIP Conference Proceedings: AIP Publishing, 2959 (1)
- A static friction model for tube bulge forming using a solid bulging medium - (2009) The International Journal of Advanced Manufacturing Technology: Springer-Verlag, 43, pp. 238-247
- A study on high ratio cup drawing by Maslennikov’s process - (2012) The International Journal of Advanced Manufacturing Technology: Springer-Verlag, 58, pp. 503-520
- A technique to measure surface asperities plastic deformation and wear in rolling contact - (2016) Wear: Elsevier, 368, pp. 496-504
- Acoustic attenuation performance analysis and optimisation of expansion chamber coupled micro-perforated cylindrical panel using response surface method - (2021) Archives of Acoustics: Polska Akademia Nauk. Czasopisma i Monografie PAN, 46 (3), pp. 507-517
- Acoustical simulation analysis of muffler with micro-perforated panel and experimental verification - (2011) The 1st International Malaysia-Ireland Joint Symposium on Engineering, Science and Business (IMiEJS 2011), pp. 1-6
- Active vibration control to attenuate hand-arm vibration from orbital sander: a mathematical model approach - (2015) Indian Journal of Science and Technology, 8 (30), pp. 1-8
- Active vibration control using PID-AFC controller of the piezo stack actuator with consideration to hysteresis and saturation effects - (2017) Proceedings of the 24th International Congress on Sound and Vibration, London, United Kingdom, 24
- Aerodynamic Performance of Swallow Bird - (2006) Technical Report, Universiti Sains Malaysia, Penang
- Aerodynamic, Materials and Vibration Characterization for New Eagle Aircraft: Computer Modeling and Simulation - End of Project Report - IRPA Long Term Project (7th Malaysian Plan), pp. 1-54
- AN APPROACH TO MODULAR MACHINE REDESIGN WITH CONSIDERATION OF FLUID FLOW - (2001) Jurnal Mekanikal
- AN APPROACH TO PLATFORM DESIGN USING DESIGN AND PERFORMANCE PARAMETERS INTERACTIONS - pp. 1-5
- An extended module identification approach for product platform architecture - (2005)
- An in–laboratory validity and reliability tested system for quantifying hand–arm tremor in motions - (2017) IEEE Transactions on Neural Systems and Rehabilitation Engineering: IEEE, 26 (2), pp. 460-467
- Analysis Of Brake Shoe Vibration Using Multi Body Dynamics Approach - (2005) pp. 115-124
- Analysis of deep drawing of sheet metal using the Marform process - (2012) The International Journal of Advanced Manufacturing Technology: Springer-Verlag, 59, pp. 491-505
- ANALYSIS OF DESIGN PARAMETER EFFECTS ON VIBRATION MODES OF A MOTORCYCLE DRUM BRAKE AND BRAKE SHOE USING THE FINITE ELEMENT METHOD - (2005) Journal - The Institution of Engineers, Malaysia , 66 (1), pp. 1-10
- Analysis of dynamic vibration absorber to attenuation hand arm vibration - (2009) INTER-NOISE and NOISE-CON Congress and Conference Proceedings: Institute of Noise Control Engineering, 2009 (8), pp. 131-139
- Analysis of exhaust muffler with micro-perforated panel - (2013) Journal of Vibroengineering: Vibroengineering, 15 (2), pp. 558-573
- Analysis of friction excited vibration of drum brake squeal - (2013) International Journal of Mechanical Sciences: Pergamon, 67, pp. 59-69
- Analysis of Impact Attenuation in 3D Printed Hip Protectors: A Support Vector Regression Approach - (2024) Nigerian Journal of Technological Development, 21 (3), pp. 98-105
- Analysis of piston secondary motion - (2013) Journal of Sound and Vibration: Academic Press, 332 (20), pp. 5162-5176
- Analysis of surface parameters and vibration of roller bearing - (2014) Tribology Transactions: Taylor & Francis, 57 (4), pp. 715-729
- Anti-friction and Wear Resistance Performance of Palm Olein Grease with Molybdenum Disulfide Additive. - (2024) Pertanika Journal of Science & Technology, 33 (3)
- Application Design for Modularity Approach to Enhance Platform Architecture - (2006) Journal of Applied Sciences, 5 (7), pp. 1513-1519
- APPLICATION OF SUPPORT VECTOR REGRESSION MODELLING FOR THE PREDICTION OF IMPACT ATTENUATION OF 3D PRINTED HIP PROTECTORS - (2023) Faculty of Engineering and Technology, University of Ilorin
- Assessment of task load demand and technology acceptance of a hoist and walking belt for patient transfer among nurses - (2023) AIP Conference Proceedings: AIP Publishing, 2959 (1)
- Assessment of the force attenuation capability of 3D printed hip protector in simulated sideways fall - (2020) Materials Research Express: IOP Publishing, 8 (1), pp. 015401
- Attenuation of motorcycle handle vibration using dynamic vibration absorber - (2018) MATEC Web of Conferences: EDP Sciences, 217, pp. 01006
- Attenution of Motorcycle Handle Vibration using Suspended Handlebar - (2020) IOP Conference Series: Materials Science and Engineering: IOP Publishing, 815 (1), pp. 012013
- Attenution of Motorcycle Handle Vibration using Suspended Handlebar. - (2020) Materials Science and Engineering Conference Series, 815 (1), pp. 012013
- Biomechanical system versus observational rating scale for Parkinson’s disease tremor assessment - (2019) Scientific Reports: Nature Publishing Group UK, 9 (1), pp. 8117
- Choosing the right patient transfer assistive device: Application of confidence ellipse quadrant analysis for decision-making - (2024) International Journal of Industrial Ergonomics: Elsevier, 103, pp. 103628
- Combined experimental and numerical analysis of bulge test at high strain rates using split Hopkinson pressure bar apparatus - (2010) Journal of Materials Processing Technology: Elsevier, 210 (8), pp. 1061-1069
- Comparison of trunk parameters and its application in an automated REBA system: A pilot study - (2023) AIP Conference Proceedings: AIP Publishing, 2959 (1)
- Compressive properties of carbon fibre reinforced plastic (CFRP) at low strain rate - (2001) Pertanika J. Sci. & Technol. Supplement, 9 (2), pp. 219-227
- Computer aided modelling of friction in rubber-pad forming process - (2009) Journal of Materials Processing Technology: Elsevier, 209 (10), pp. 4925-4934
- Correction of the Dynamic Effect in Weight Measurement using the Load Cell - (2017) Proceedings of the International Conference on Vibration, Sound and System Dynamics, pp. 81-86
- Design and analysis of thermomechanical cautery system - (2023) AIP Conference Proceedings: AIP Publishing, 2959 (1)
- Design and optimization of piezoelectric fans for cooling of microelectronic devices - (2007) Journal of microelectronics and electronic packaging: International Microelectronics Assembly and Packaging Society Collection, 4 (3), pp. 121-129
- Design of Multi–family Product Platform by Using Modularity Approach - (2005) Jurnal Teknologi, pp. 75–90-75–90
- Design of the mounting system of a grass trimmer engine for minimum handle vibration response based on frequency-dependent stiffness and loss factor properties - (2015) Journal of Vibroengineering: JVE International Ltd., 17 (5), pp. 2155-2166
- Determination of maintainability index based on assembly criteria - (2008) Journal of applied sciences, 6 (12), pp. 2586-2592
- Development of a lower limb stroke rehabilitation machine - (2018) MATEC Web of Conferences: EDP Sciences, 217, pp. 02004
- Development of Active Vibration Control Cancellation Pad for Orbital Sander - (2011) Proceedings of the 4th International Product Design & Development Yogyakarta, 9, pp. 10
- Development of Add-On Active Vibration Control (AVC) for Power Tools - (2009) Innovate Malaysia Design Competition, 2015, pp. 1
- Development of an ultrasonic scalpel - (2020) IOP Conference Series: Materials Science and Engineering: IOP Publishing, 815 (1), pp. 012014
- Development of custom-made serious game for trunk post-stroke rehabilitation - (2023) AIP Conference Proceedings: AIP Publishing, 2959 (1)
- DEVELOPMENT OF LOW FREQUENCY ELECTROMAGNETIC VIBRATION ENERGY HARVESTER - (2016) Universiti Sains Malaysia
- Dynamic characterization of engine mount at different orientation using sine swept frequency test - (2010) Regional Conference on Mechanical and Aerospace Technology, Bali
- Dynamic stiffness and loss factor measurement of engine rubber mount by impact test - (2011) Materials & Design: Elsevier, 32 (4), pp. 1880-1887
- Effect of drum radius variation on the brake torque variation and brake factor - (2013) International journal of vehicle design: Inderscience Publishers Ltd, 63 (4), pp. 404-422
- Effect of Femur Geometry on Hip Protectors Testing System - (2020) IOP Conference Series: Materials Science and Engineering: IOP Publishing, 815 (1), pp. 012017
- Effect of friction models on stress distribution of sheet materials during V-bending process - (2009) World Academy of Science, Engineering and Technology, 32, pp. 654-659
- Effect of Heat Treatment on Ni-P-Cg(Graphite)-SiC Composite Coated Cast AlSi Alloy - (2013) Advanced Materials Research: Trans Tech Publications Ltd, 795, pp. 545-549
- Effects of tip gap and amplitude of piezoelectric fans on the performance of heat sinks in microelectronic cooling - (2012) Heat and Mass Transfer: Springer-Verlag, 48, pp. 893-901
- Electrical-thermal interaction study of electrical busway using finite element analysis - (2017) AIP Conference Proceedings: AIP Publishing, 1865 (1)
- Electroless Ni-P-Cg(graphite)-SiC composite coating and its application onto piston rings of a small two stroke utility engine - (2010) NISCAIR-CSIR, India, pp. 830-834
- Electroless Ni-P-Cg(Graphite)-SiC Composite Coating on Cast AlSi Alloy - (2013) Advanced Materials Research: Trans Tech Publications Ltd, 795, pp. 540-544
- Enhancing Design for Aesthetics Based on Product Platform Architecture - (2005) P ertanika J ourna, pp. 113
- Environmentally friendly cure for railway wear and curve squeal? Proposal for palm oil-based grease as a friction modifier - (2023) AIP Conference Proceedings: AIP Publishing, 2959 (1)
- Evaluation of a motorised patient transfer device based on perceived workload, technology acceptance, and emotional states - (2024) Disability and Rehabilitation: Assistive Technology: Taylor & Francis, 19 (3), pp. 938-950
- Evaluation of acoustic performance of cascaded cylindrical micro-perforated panel - (2023) Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications: SAGE Publications, 237 (5), pp. 1146-1158
- Evaluation of composite made from palm oil fibres as sound absorber - (2023) AIP Conference Proceedings: AIP Publishing, 2959 (1)
- Experimental study of surface asperity deformation in the running-In of rolling contacts - (2022) Tribology Transactions: Taylor & Francis, 65 (6), pp. 1099-1109
- Factors associated with vascular and neurological complications of hand-arm vibration syndrome among tire shop workers in Kelantan, Malaysia - (2021) journal of Occupational Health: Oxford University Press, 63 (1), pp. e12220
- Fatigue behaviour of aluminum alloy at elevated temperature - (2009) Modern applied science: Canadian Center of Science and Education, 3 (4), pp. 52-61
- Field measurement of hand forces of palm oil harvesters and evaluating the risk of work-related musculoskeletal disorders (WMSDs) through biomechanical analysis - (2023) International Journal of Industrial Ergonomics: Elsevier, 96, pp. 103468
- Friction and wear characteristics of tic surface coatings in a small two-stroke utility engine - (2008) 2008-32-0006, SAE Technical Paper
- Frictional analysis of a small two-stroke utility engine via tear-down testing - (2007) SAE Technical Paper
- Frictional behavior of piston rings of small utility two-stroke engine under secondary motion of piston - (2011) Tribology International: Elsevier, 44 (5), pp. 592-602
- GRANT SPONSORED BY YAYASAN FELDA - COMPREHENSIVE REPORT, pp. 1-49
- Hand arm vibration and noise exposure measurement on the user of grass trimmer with petrol engine - (2005) pp. 259-266
- HEAT TRANSFER ENHANCEMENT USING PIEZOELECTRIC FAN IN ELECTRONIC COOLING-EXPERIMENTAL AND NUMERICAL OBSERVATIONS. - (2012) Journal of Thermal Science & Technology/Isı Bilimi ve Tekniği Dergisi, 32 (1)
- High strain-rate bulge forming of sheet metals using a solid bulging medium - (2010) Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture: Sage Publications, 224 (2), pp. 257-270
- Impact technique for measuring global dynamic stiffness of engine mounts - (2014) International Journal of Automotive Technology: The Korean Society of Automotive Engineers, 15, pp. 1015-1026
- In-situ surface wear assessment using a bearing area curve technique - (2022) Tribology-Materials, Surfaces & Interfaces: SAGE Publications, 16 (3), pp. 235-244
- Integration of design for modularity and design for assembly to enhance product maintainability - (2006) International Conference on Manufacturing and Material Processing, pp. 263-267
- Introduction to sheet metal forming processes - (2012) Rubber-pad forming processes, pp. 1-22
- Investigation of motorcycle handle vibration attenuation using a suspended handlebar with different rubber mount characteristics - (2022) Int J Acoust Vibr, 27 (3), pp. 276-284
- Investigation of trunk muscle activation across different neurological disease recovery outcome assessments: A preliminary study using healthy subjects - (2023) AIP Conference Proceedings: AIP Publishing, 2959 (1)
- Investigation of Wear and Friction Behavior of Cobalt-Chromium-Molybdenum Alloy Produced by Laser Powder Bed Fusion - (2023) Applied Sciences: MDPI, 13 (19), pp. 10582
- Kaedah Pengukuran Indek Kebolehsenggaraan Produk atau Sistem Berdasarkan Kriteria Pemasangan - (2005) Jurnal Teknologi (Sciences & Engineering), 42(1), pp. 91–106.
- Kajian Kepuasan Pelanggan Terhadap Produk Pengguna Untuk Menyokong Seni Bina Produk Modular - (2004) Jurnal Mekanikal
- Kajian Kes (Maintainability Index Measurement Method Based on Design for Assembly (DFA)-A Case Study) - (2006) JURNAL KEJURUTERAAN: UKM PRESS, 18, pp. 7-20
- Lifetime Vibration Dose (LVD) Correlates with Severity of Neurological Component of HAVS among Tyre Shop Workers in Kelantan, Malaysia - (2019) Int J Occup Saf Ergon, pp. 1-9
- Lifetime vibration dose correlates with severity of the neurological component of hand-arm vibration syndrome among tyre shop workers in Kelantan, Malaysia - (2021) International Journal of Occupational Safety and Ergonomics: Taylor & Francis
- Low Frequency Electromagnetic Structural Vibration Energy Harvester to Power up Wireless Sensor Node - (2017) International Journal of Scientific Research in Knowledge, 5 (1), pp. 042-049
- Low Frequency Electromagnetic Vibration Energy Harvester - pp. 1-5
- MODELING OF BRAKE SHOE IN DRUMBRAKESQUEAL - (2011) Proceedings of Regional Tribology Conference 2011: RTC2011: Malaysian Tribology Society, pp. 105
- MODELING OF CUTTING FORCE FOR PALM OIL FRONDS - (2023) Engenharia Agrícola: Associação Brasileira de Engenharia Agrícola, 43 (4), pp. e20230081
- Modeling of microindentation with consideration of the surface roughness - (2013) Metallurgical and Materials Transactions A: Springer US, 44, pp. 5676-5687
- Modelling of kinetic friction in V-bending of ultra-high-strength steel sheets - (2010) The International Journal of Advanced Manufacturing Technology: Springer-Verlag, 46, pp. 101-110
- Motion Characteristics of Subclinical Tremors in Parkinson’s Disease and Healthy Subjects - (2021) Research Square
- Motion characteristics of subclinical tremors in Parkinson’s disease and normal subjects - (2022) Scientific Reports: Nature Publishing Group UK, 12 (1), pp. 4021
- Musculoskeletal complications of hand–arm vibration syndrome among tyre shop workers in Kelantan, Malaysia - (2022) International Journal of Occupational Safety and Ergonomics: Taylor & Francis, 28 (1), pp. 213-222
- Nodal control of grass trimmer handle vibration - (2013) International Journal of Industrial Ergonomics: Elsevier, 43 (1), pp. 18-30
- Numerical and experimental investigations on effect of fan height on the performance of piezoelectric fan in microelectronic cooling - (2009) International Communications in Heat and Mass Transfer: Pergamon, 36 (1), pp. 51-58
- Numerical simulation of sheet stamping process using flexible punch - (2009) Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture: Sage Publications, 7, pp. 829-840
- Optimization of an engine mounting system with consideration of frequency-dependent stiffness and loss factor - (2016) Journal of Vibration and Control: SAGE Publications, 22 (10), pp. 2406-2419
- Optimization of double-layered micro-perforated panels with vibro-acoustic effect - (2016) Journal of the Brazilian Society of Mechanical Sciences and Engineering: Springer Berlin Heidelberg, 38, pp. 745-760
- Optimization of the Impact Attenuation Capability of Three-Dimensional Printed Hip Protector Produced by Fused Deposition Modeling Using Response Surface Methodology - (2023) 3D Printing and Additive Manufacturing: Mary Ann Liebert, Inc., 10 (5), pp. 971-983
- Optimizing the bearing vertical offset of a marine propeller shaft system - (2024) Proceedings of the Institution of Mechanical Engineers, Part M: Journal of Engineering for the Maritime Environment: SAGE Publications, pp. 14750902241277260
- PATHOLOGICAL TREMOR MEASUREMENT AND REPRODUCTION - (2015) 1 (1)
- Peningkatan Perkongsian Komponen Berdasarkan Kaedah Modular –Satu Kajian Kes - (2004) Jurnal Teknologi, pp. 97–110-97–110
- Plastic bulging of sheet metals at high strain rates - (2010) The International Journal of Advanced Manufacturing Technology: Springer-Verlag, 48, pp. 847-858
- Plastic deformation in running-in of rolling contact - (2015) Proceedings of Malaysian International Tribology Conference, 2015, pp. 64-65
- Prediction of wind induced noise over bodies and small cavity - (2013) The Journal of the Acoustical Society of America: Acoustical Society of America, 134 (5), pp. 4222-4222
- Preliminary evaluation of active tremor cancellation spoon for patients with hand tremor - (2023) IOP Conference Series: Materials Science and Engineering: IOP Publishing, 815 (1), pp. 012002
- Prevalence of Hand-Arm Vibration Syndrome (HAVS) among Tyre Shop Workers in Kota Bharu, Kelantan, Malaysia - (2018) Asia Pacific Environmental and Occupational Health Journal, 4 (2)
- Prevalence of hand-arm vibration syndrome among tyre shop workers in Kelantan, Malaysia - (2019) Journal of Occupational Health: Oxford University Press, 61 (6), pp. 498-507
- Psychoacoustic annoyance analysis for two way radio under wind noise - (2016) ARPN J Eng App Sci, 11 (3), pp. 2120
- Quantifying the surface roughness effect in microindentation using a proportional specimen resistance model - (2013) Journal of Materials Science: Springer US, 48, pp. 6293-6306
- REBA assessment of patient transfer work using sliding board and Motorized Patient Transfer Device - (2022) International Journal of Industrial Ergonomics: Elsevier, 90, pp. 103322
- Resistance end correction factor of microperforated panel made using additive manufacturing - (2021) an International Journal Engineering Science and Technology: Elsevier, 24 (6), pp. 1281-1291
- Rotating machine fault detection using operational defection shape (ODS) - (2007) pp. 90-97
- Sheet metal forming with the aid of flexible punch, numerical approach and experimental validation - (2010) CIRP Journal of Manufacturing Science and Technology: Elsevier, 3 (3), pp. 196-203
- Static analysis of railway curve squeal using the finite element method - (2023) AIP Conference Proceedings: AIP Publishing, 2959 (1)
- Structural dynamic modification of an active suspended handle with a parallel coupled piezo stack actuator - (2016) Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering: SAGE Publications, 230 (2), pp. 130-144
- Superlubricity of materials: progress, potential, and challenges - (2023) Materials: MDPI, 16 (14), pp. 5145
- Surface and vibration analysis of spur gear lubricated with palm olein-based grease - (2023) AIP Conference Proceedings: AIP Publishing, 2959 (1)
- Surface degradation analysis of roller bearing lubricated with palm oil-based grease - (2023) AIP Conference Proceedings: AIP Publishing, 2959 (1)
- Technique of measuring piston secondary motion using laser displacement sensors - (2012) Experimental mechanics: Springer US, 52, pp. 1447-1459
- Technique to determine instantaneous piston skirt friction during piston slap - (2014) Tribology International: Elsevier, 74, pp. 145-153
- TECHNIQUE TO OVERCOME PIEZO STACK ACTUATOR SATURATION USING PARALLEL STIFFNESS COMBINATION FOR AN ACTIVE SUSPENDED HANDLE - (2015) International Conference on Engineering Vibration Ljubljana, Slovenia, pp. 592
- Test Condition Optimization for Testing of Hip Protectors - (2020) IOP Conference Series: Materials Science and Engineering: IOP Publishing, 920 (1), pp. 012029
- The design and development of suspended handles for reducing hand-arm vibration in petrol driven grass trimmer - (2011) International Journal of Industrial Ergonomics: Elsevier, 41 (5), pp. 459-470
- The effect of lubrication on the vibration of roller bearings - (2018) MATEC Web of Conferences: EDP Sciences, 217, pp. 01004
- The effect of turbulence intensity on the aerodynamic performance of airfoils - (2001) 4th International Conference on Mechanical Engineering, pp. 31-36
- The effective frequency range of an active suspended handle based on the saturation effects of a piezo stack actuator - (2017) Journal of Vibration and Control: SAGE Publications, 23 (5), pp. 752-769
- The operational deflection shapes and transient analysis of the brake shoes in drum brake squeal - (2013) Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering: Sage Publications, 227 (6), pp. 866-884
- The tribological performance analysis of palm olein-based grease lubricants containing copper nanoparticle additive - (2023) Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology: SAGE Publications, 237 (12), pp. 2162-2177
- The Use of Virtual Reality in Stable Sitting Trunk Rehabilitation for Stroke Patients: A Pilot Study - (2024) IIUM Medical Journal Malaysia, 23 (3)
- Thermodynamic, Economic and Regulation Strategies Analysis of a Phosphoric Acid Fuel Cell Combined Heating and Cooling - (2024) Results in Engineering: Elsevier, pp. 103331
- Transient analysis of drum brake squeal with binary flutter and negative friction-velocity instability mechanisms - (2011) Journal of Vibroengineering: Vibroengineering, 13 (2), pp. 275-287
- Transmission loss analysis of muffler with micro-perforated panel - "(2010) Proceedings of the 2010 International Conference on Advances in Mechanical Engineering
ICAME2010, pp. 127-131"
- Transmission loss analysis of simple expansion tube with micro–perforated cylindrical panel - (2020) IOP Conference Series: Materials Science and Engineering: IOP Publishing, 815 (1), pp. 012008
- Tuned vibration absorber for suppression of hand-arm vibration in electric grass trimmer - (2011) International journal of industrial ergonomics: Elsevier, 41 (5), pp. 494-508
- Understanding the interaction between stroke patients and a trunk rehabilitation device: Insight from the technology acceptance model - (2023) AIP Conference Proceedings: AIP Publishing, 2959 (1)
- Universal Suspended Handle Adaptor for Petrol Engine Grass Trimmer - School of Mechanical Engineering, Engineering Campus, Universiti Sains Malaysia, Penang, Malaysia
- Utilization of design for assembly guideline to enhance product maintainability - (2007) Journal of Applied Sciences, 7 (21), pp. 3234-3241
- Utilization of design for modularity approach to identify product platform - (2008) Modern Applied Science: Canadian Center of Science and Education, 2 (2), pp. 1-10
- Validation of Electronic Weighing Device for Vertical Ground Reaction Force and Centre of Pressure Measurement; and Clinical Metrics Derivation - (2024) Malaysian Journal of Fundamental and Applied Sciences, 20 (4), pp. 888-901
- Book
- Geseran dan Getaran yang Menggusarkan (Penerbit USM) - Penerbit USM
- Rubber-pad forming processes: Technology and applications - (2010) Elsevier: Woodhead Publishing
- Book Chapter
- Bulge test of sheet metals using rubber as pressure carrying medium - (2010) Proceedings of the 6th Australasian Congress on Applied Mechanics: Engineers Australia, pp. 1361-1370
- Conference Paper
- Correlation between PWM modulation of an induction motor inverter and radiated electromagnetic acoustic noise - (2014) 2014 IEEE International Conference on Control System, Computing and Engineering (ICCSCE 2014): IEEE, pp. 267-272
- Development of a low-cost modular pole climbing robot - (2000) 2000 TENCON Proceedings. Intelligent Systems and Technologies for the New Millennium (Cat. No. 00CH37119): IEEE, 1, pp. 196-200
- Development of wearable inertial sensors for measurement of hand arm tremors - (2013) 2013 IEEE International Conference on Smart Instrumentation, Measurement and Applications (ICSIMA: IEEE, pp. 1-6
- Dynamic analysis of engine mounts at different orientations - (2010) Fourth International Conference on Experimental Mechanics: SPIE, 7522, pp. 924-933
- Effect of piezoelectric fan height on flow and heat transfer for electronics cooling applications - (2008) 2008 International Conference on Electronic Materials and Packaging: IEEE, pp. 165-170
- Integration of low frequency electromagnetic generator with low threshold voltage diode multiplier circuitry - (2015) 2015 International Symposium on Technology Management and Emerging Technologies (ISTMET): IEEE, pp. 44-48
- Piezo stack actuator saturation control of the coupled active suspended handle-die grinder using various PID-anti-windup control schemes - (2016) 2016 6th IEEE International Conference on Control System, Computing and Engineering (ICCSCE): IEEE, pp. 22-27
- Predicting combined-cycle natural gas power plant emissions by using artificial neural networks - (2000) 2000 TENCON Proceedings. Intelligent Systems and Technologies for the New Millennium (Cat. No. 00CH37119): IEEE, 3, pp. 512-517
- Simulation of Flow Distribution Inside Small Cavity at Two Way Radio by CFD (Ansys Fluent) - (2020) Advancement in Emerging Technologies and Engineering Applications: Springer Singapore, pp. 393-398
- Some design issues of piezoelectric resonating structure for cooling of microelectronic components - (2004) Proceedings of 6th Electronics Packaging Technology Conference (EPTC 2004)(IEEE Cat. No. 04EX971): IEEE, pp. 264-269
- Sound quality analysis for two-way radio under wind noise - (2013) 2013 IEEE International Conference on Smart Instrumentation, Measurement and Applications (ICSIMA): IEEE, pp. 1-5
- Synthetic Jet Study on Resonance Driving Frequency for Electronic Cooling - (2018) Regional Conference on Science, Technology and Social Sciences (RCSTSS 2016) Theoretical and Applied Sciences: Springer Singapore, pp. 435-443
- Wind noise analysis of a two-way radio - (2013) 2013 IEEE International Conference on Smart Instrumentation, Measurement and Applications (ICSIMA): IEEE, pp. 1-5
- Review
- An overview of enhancing the performance of medical implants with nanocomposites - (2023) Journal of Composites Science: MDPI, 7 (5), pp. 199
- Effects of patient transfer devices on the risk of work-related musculoskeletal disorders: a systematic review - (2023) International Journal of Occupational Safety and Ergonomics: Taylor & Francis, 29 (2), pp. 494-514
- Efficacy of interventions in reducing the risks of work-related musculoskeletal disorders among healthcare workers: a systematic review and meta-analysis - (2023) Workplace health & safety: SAGE Publications, 71 (12), pp. 557-576
- Ergonomic Assessment of Patient Transfer and Handling: A Review - (2023) Hum. Factors Ergon. J.(HFEJ), 8, pp. 14-31
- Occupant safety and injuries in coach frontal collision: a literature review - (2024) Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering: SAGE Publications, pp. 09544070241257988
- Pathological hand tremor measurement—challenges and advances - (2018) 2nd International Conference for Innovation in Biomedical Engineering and Life Sciences: ICIBEL 2017 (in conjunction with APCMBE 2017): Springer Singapore, pp. 3-8
- Test systems for the biomechanical evaluation of hip protectors: a systematic review - (2020) Osteoporosis International: Springer London, 31, pp. 43-58
- Article
- Research Gate
- Article
- A biomechanical analysis on work-related musculoskeletal disorders using a mechanised chainsaw for oil palm harvesting - (2024) Journal of Oil Palm Research
- A preliminary biomechanical assessment and user perceptions of a motorized lifter for patient transfer - (2024) Assistive technology: the official journal of RESNA
- A technique to measure surface asperities plastic deformation and wear in rolling contact - (2016) Wear, 368
- An approach to mechanization and automation of manual construction activity - (2011) International Review of Mechanical Engineering (IREME), 5(7), 1266-1271
- An In–Laboratory Validity and Reliability Tested System for Quantifying Hand–Arm Tremor in Motions - (2017) IEEE transactions on neural systems and rehabilitation engineering: a publication of the IEEE Engineering in Medicine and Biology Society, PP(99), 1-1
- Analysis of exhaust muffler with micro-perforated panel - (2013) Journal of Vibroengineering, 15(2), pp. 558-573
- Analysis of friction excited vibration of drum brake squeal - (2013) International Journal of Mechanical Sciences, 67, pp. 59-69
- Analysis of piston secondary motion - (2013) Journal of Sound and Vibration, 332(20), pp. 5162-5176
- Analysis of Surface Parameters and Vibration of Roller Bearing - (2014) Tribology Transactions, 57(4)
- Anti-friction and Wear Resistance Performance of Palm Olein Grease with Molybdenum Disulfide Additive - (2024) Pertanika Journal of Science and Technology, 32(3), pp. 1023-1042
- Application of IDEF3 process description capture to mechanize manual tile installation - (2011) International Review of Mechanical Engineering (I.RE.M.E.), 5(7)
- Assessment of the force attenuation capability of 3D printed hip protector in simulated sideways fall - (2021) Materials Research Express, 8(1)
- Attenuation of Motorcycle Handle Vibration Using Dynamic Vibration Absorber - (2018) MATEC Web of Conferences, 217(3), 01006
- Biomechanical System Versus Observational Rating Scale for Parkinson’s Disease Tremor Assessment - (2019) Scientific Reports, 9(1)
- Choosing the right patient transfer assistive device: Application of confidence ellipse quadrant analysis for decision-making - (2024) International Journal of Industrial Ergonomics, 103, 103628
- Compressive properties of carbon fibre reinforced plastic (cfrp) at low strain rate? - (2001)
- Design of the mounting system of a grass trimmer engine for minimum handle vibration response based on frequency-dependent stiffness and loss factor properties - (2016) Journal of Vibroengineering, 17(5), pp. 2155‑2166
- Development of a Lower Limb Stroke Rehabilitation Machine - (2018) MATEC Web of Conferences, 217(11), 02004
- Effect of drum radius variation on the brake torque variation and brake factor - (2013) International Journal of Vehicle Design, 63(4)
- Effect of Femur Geometry on Hip Protectors Testing System - (2020) IOP Conference Series Materials Science and Engineering, 815(1), 012017
- Effect of Heat Treatment on Ni-P-Cg(Graphite)-SiC Composite Coated Cast AlSi Alloy - (2013) Advanced Materials Research, 795, pp. 545-549
- Effectiveness of Focal Vibration on Muscle Tone, Kinematic Parameters, and Motor Function in Individuals with Stroke, Parkinson’ Disease and Multiple Sclerosis: A Systematic Review, Meta-Analysis and Meta-Regression - (2024) Med & Health, 19(1), pp. 40-67
- Effectiveness of Rehabilitative Interventions Beginning within the First Month of Stroke Onset in Improving Lower Extremity-related Outcomes: A Systematic Review and Network Meta-Analysis - (2023) Medicine & Health, 18(2), pp. 328-372
- Effects of Stable-Sitting Trunk Exercises on Trunk Muscle Activation and Postural Control in Stroke Survivors: A Pilot Study - (2024) Med & Health, 19(2), pp. 513-525
- Efficacy of Interventions in Reducing the Risks of Work-Related Musculoskeletal Disorders Among Healthcare Workers: A Systematic Review and Meta-Analysis - (2023) Workplace Health & Safety
- Efficacy of lifting devices for wheelchair transfers: a systematic review and meta-analysis - (2024) Ergonomics
- Electroless Ni-P-Cg(graphite)-SiC composite coating and its application onto piston rings of a small two stroke utility engine - (2010) Journal of Scientific & Industrial Research, 69(11), pp. 830-834
- Electroless Ni-P-Cg(Graphite)-SiC Composite Coating on Cast AlSi Alloy - (2013) Advanced Materials Research, 795, pp. 540-544
- Ergonomic Assessment of Patient Transfer and Handling: A Review - (2024) Human Factors and Ergonomics Journal (HFEJ) 2023, 8 (2), pp. 14 – 31
- Evaluation of a motorised patient transfer device based on perceived workload, technology acceptance, and emotional states - (2022) Disability and rehabilitation. Assistive technology, 19(4), pp. 1-13
- Evaluation of acoustic performance of cascaded cylindrical micro-perforated panel - (2022) Proceedings of the Institution of Mechanical Engineers Part L Journal of Materials Design and Applications, 237(5), 146442072211384
- Experimental and finite element analysis of surface asperity geometry during the running-in phase of rolling contact - (2024) ARCHIVE Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science 1989-1996, 238(19), pp. 203-210
- Experimental Study of Surface Asperity Deformation in The Running-in of Rolling Contact - (2022) Tribology Transactions, 65(1), pp. 1-14
- Factors associated with vascular and neurological complications of hand‐arm vibration syndrome among tire shop workers in Kelantan, Malaysia - (2021) Journal of Occupational Health, 63(1)
- Fatigue Behaviour of Aluminum Alloy at Elevated Temperature - (2019) Modern Applied Science, 3, pp. 52-61
- Fatigue Behaviour of Aluminum Alloy at Elevated Temperature. - (2009) Modern Applied Science, 3(4)
- Field measurement of hand forces of palm oil harvesters and evaluating the risk of work-related musculoskeletal disorders (WMSDs) through biomechanical analysis - (2023) International Journal of Industrial Ergonomics, 96(14), 103468
- Friction and Wear Characteristics of TiC Surface Coatings in a Small Two-Stroke Utility Engine - (2008) SAE Technical Papers 1, 2008-32
- Frictional Analysis of a Small Two-Stroke Utility Engine via Tear-Down Testing
- Frictional behavior of piston rings of small utility two-stroke engine under secondary motion of piston - (2011) Tribology International, 44(5), pp. 592-602
- Impact technique for measuring global dynamic stiffness of engine mounts - (2014) International Journal of Automotive Technology, 15(6), pp. 1015-1026
- In-situ surface wear assessment using a bearing area curve technique - (2022) Tribology - Materials Surfaces & Interfaces, 16(3), pp. 1-10
- Investigation of Motorcycle Handle Vibration Attenuation using a Suspended Handlebar with Different Rubber Mount Characteristics - (2022) The International Journal of Acoustics and Vibration, 27(3), pp. 276-284
- Kaedah Pengukuran Indek Keboleh-Selenggaraan Berdasarkan Reka Bentuk Untuk Pemasangan (DFA) -Satu Kajian Kes - Jurnal Kejuruteraan, 18, 2006, pp. 7-20
- Kaedah Pengukuran Indek Kebolehsenggaraan Produk atau Sistem Berdasarkan Kriteria Pemasangan - (2012) Jurnal Teknologi, 42(1)
- Lifetime Vibration Dose (LVD) Correlates with Severity of Neurological Component of HAVS among Tyre Shop Workers in Kelantan, Malaysia - (2019) International journal of occupational safety and ergonomics: JOSE, 27(1), pp. 1-9
- Low Frequency Electromagnetic Structural Vibration Energy Harvester to Power up Wireless Sensor Node - (2017) International Journal of Scientific Research in Knowledge, 5(1), pp. 42-49
- Motion characteristics of subclinical tremors in Parkinson’s disease and normal subjects - (2022) Scientific Reports, 12(1)
- Musculoskeletal complications of hand–arm vibration syndrome among tyre shop workers in Kelantan, Malaysia - (2020) International journal of occupational safety and ergonomics: JOSE, 28(3), pp. 1-10
- Near-1: the evaluation of usability and task load demand of a motorized lifter for patient transfer - (2023) Disability and rehabilitation. Assistive technology, 19(1), pp. 1-8
- Occupant safety and injuries in coach frontal collision: a literature review - (2024) Proceedings of the Institution of Mechanical Engineers Part D Journal of Automobile Engineering
- Optimization of an engine mounting system with consideration of frequency-dependent stiffness and loss factor - (2014) Journal of Vibration and Control, 22(10)
- Optimization of double-layered micro-perforated panels with vibro-acoustic effect - (2014) Journal of the Brazilian Society of Mechanical Sciences and Engineering
- Optimization of the Impact Attenuation Capability of Three-Dimensional Printed Hip Protector Produced by Fused Deposition Modeling Using Response Surface Methodology - (2021) 3D Printing and Additive Manufacturing, 10(5)
- Optimization of tile laying process parameters using taguchi's method - (2011) International Review of Mechanical Engineering (IREME), 5(7), 1258-1265
- Optimizing the bearing vertical offset of a marine propeller shaft system - (2024) Proceedings of the Institution of Mechanical Engineers Part M Journal of Engineering for the Maritime Environment
- Prediction of wind induced noise over bodies and small cavity - (2013) The Journal of the Acoustical Society of America, 134(5), 4222
- Prevalence of Hand-Arm Vibration Syndrome (HAVS) among Tyre Shop Workers in Kota Bharu, Kelantan, Malaysia. - (2018) Asia Pacific Environmental and Occupational Health Journal : Environmental and Occupational Health Society, 4(2), pp. 29-34
- Prevalence of hand‐arm vibration syndrome among tyre shop workers in Kelantan, Malaysia - (2019) Journal of Occupational Health, 61(1)
- REBA assessment of patient transfer work using sliding board and Motorized Patient Transfer Device - (2022) International Journal of Industrial Ergonomics, 90(1)
- Resistance end correction factor of microperforated panel made using additive manufacturing - (2021) Engineering Science and Technology an International Journal
- Technique of Measuring Piston Secondary Motion Using Laser Displacement Sensors - (2012) Experimental Mechanics, 52(9)
- Technique to determine instantaneous piston skirt friction during piston slap - (2014) Tribology International, 74, pp. 145–153
- Test Condition Optimization for Testing of Hip Protectors - (2020) IOP Conference Series Materials Science and Engineering, 920(1), 012029
- Test systems for the biomechanical evaluation of hip protectors: a systematic review - (2019) Osteoporosis International, 31(1)
- The effects of patient transfer devices on the risk of work-related musculoskeletal disorders (WMSDs): a systematic review - (2022) International journal of occupational safety and ergonomics: JOSE, 29(1), pp. 1-49
- The Efficacy of Trunk Training Treatment Intensities on Trunk Control of Stroke Patients: A Systematic Review, Meta-Analysis and Meta-Regression - (2023) Medicine & Health, 18(2), pp. 300-327
- The operational deflection shapes and transient analysis of the brake shoes in drum brake squeal - (2013) Proceedings of the Institution of Mechanical Engineers Part D Journal of Automobile Engineering, 227(6), pp. 866-884
- The size effect of molybdenum disulphide additives on friction and wear performance of lithium-thickened palm olein grease - (2023) Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology, 238(6), pp. 641-652
- The tribological performance analysis of palm olein-based grease lubricants containing copper nanoparticle additive - (2023) Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology, 237(12)
- The Use of Virtual Reality in Stable Sitting Trunk Rehabilitation for Stroke Patients: A Pilot Study - (2024) IIUM Medical Journal Malaysia, 23(03)
- Transient analysis of drum brake squeal with binary flutter and negative friction-velocity instability mechanisms - (2011) Journal of Vibroengineering, 13(2), pp. 275-287
- Transmission Loss Analysis of Simple Expansion Tube with Micro – perforated Cylindrical Panel - (2020) IOP Conference Series Materials Science and Engineering, 815(1), 012008
- Tuned vibration absorber for suppression of hand-arm vibration in electric grass trimmer - (2011) International Journal of Industrial Ergonomics, 41(5), 494-508
- Validation of Electronic Weighing Device for Vertical Ground Reaction Force and Centre of Pressure Measurement; and Clinical Metrics Derivation - (2024) Malaysian Journal of Fundamental and Applied Sciences, 20(4), pp. 888-901
- Book Chapter
- Pathological Hand Tremor Measurement—Challenges and Advances - (2018) 2nd International Conference for Innovation in Biomedical Engineering and Life Sciences: IFMBE proceedings, pp.3-8
- Simulation of Flow Distribution Inside Small Cavity at Two Way Radio by CFD (Ansys Fluent) - (2020) Advancement in Emerging Technologies and Engineering Applications, pp.393-398
- Conference Paper
- A process capture method for patient transfer processes - (2023) PROCEEDINGS OF THE 4TH INTERNATIONAL CONFERENCE ON VIBRATION, SOUND AND SYSTEM DYNAMICS (ICVSSD 2022): AIP Conference Proceedings
- Acoustical simulation analysis of muffler with micro-perforated panel and experimental verification - (2011) The 1st International Malaysia-Ireland Joint Symposium on Engineering, Science and Business (IMiEJS 2011)
- Analysis of Dynamic Vibration Absorber to Attenuate Hand Arm Vibration - (2009) NOVEM 2009: Noise and Vibration: Emerging Methods
- APPLICATION OF SUPPORT VECTOR REGRESSION MODELLING FOR THE PREDICTION OF IMPACT ATTENUATION OF 3D PRINTED HIP PROTECTORS - (2023) 1st Faculty of Engineering and Technology Conference (FETiCON 2023)
- Assessment of task load demand and technology acceptance of a hoist and walking belt for patient transfer among nurses - (2023) PROCEEDINGS OF THE 4TH INTERNATIONAL CONFERENCE ON VIBRATION, SOUND AND SYSTEM DYNAMICS (ICVSSD 2022): AIP Conference Proceedings
- Correlation between PWM Modulation of an Induction Motor Inverter and Radiated Electromagnetic Acoustic Noise - (2014) 2014 IEEE International Conference on Control System, Computing and Engineering (ICCSCE)
- Design and analysis of thermomechanical cautery system - (2023) PROCEEDINGS OF THE 4TH INTERNATIONAL CONFERENCE ON VIBRATION, SOUND AND SYSTEM DYNAMICS (ICVSSD 2022): AIP Conference Proceedings
- Development of Active Vibration Control Cancellation Pad for Orbital Sander - (2011) Proceedings of the 4th International Product Design & Development
- DEVELOPMENT OF LOW FREQUENCY ELECTROMAGNETIC VIBRATION ENERGY HARVESTER - (2016) International Conference on Engineering of Tarumanagara (ICET 2015)
- Development of wearable inertial sensors for measurement of hand arm tremors - (2013) 2013 IEEE International Conference on Smart Instrumentation, Measurement and Applications (ICSIMA)
- Dynamic characterization of engine mount at different orientation using sine swept frequency test - (2010) Regional Conference on Mechanical and Aerospace Technology
- Environmentally friendly cure for railway wear and curve squeal? Proposal for palm oil-based grease as a friction modifier - (2023) PROCEEDINGS OF THE 4TH INTERNATIONAL CONFERENCE ON VIBRATION, SOUND AND SYSTEM DYNAMICS (ICVSSD 2022): AIP Conference Proceedings
- Evaluation of composite made from palm oil fibres as sound absorber - (2023) PROCEEDINGS OF THE 4TH INTERNATIONAL CONFERENCE ON VIBRATION, SOUND AND SYSTEM DYNAMICS (ICVSSD 2022): AIP Conference Proceedings
- Integration of low frequency electromagnetic generator with low threshold voltage diode multiplier circuitry - (2015) 2015 International Symposium on Technology Management and Emerging Technologies (ISTMET)
- Low Frequency Electromagnetic Vibration Energy Harvester - (2016) ICCSCE 2015
- Measurement of dynamic compressive stiffness and dynamic shear stiffness by impact technique - (2013) 15th Asia Pacific Vibration Conference
- Noise and Vibration Characterization of a Variable Speed Induction Motor based on Source Path-Receiver Model Mechanical Engineering Research Colloquium (MERC) 2014 - (2014) Mechanical Engineering Research Colloquium 2014
- Simulation of Flow Distribution inside Small Cavity at Two-Way Radio - (2018)
- Sound quality analysis for two-way radio under wind noise - (2013) 2013 IEEE International Conference on Smart Instrumentation, Measurement and Applications (ICSIMA)
- Static analysis of railway curve squeal using the finite element method - (2023) PROCEEDINGS OF THE 4TH INTERNATIONAL CONFERENCE ON VIBRATION, SOUND AND SYSTEM DYNAMICS (ICVSSD 2022): AIP Conference Proceedings
- Surface and vibration analysis of spur gear lubricated with palm olein-based grease - (2023) PROCEEDINGS OF THE 4TH INTERNATIONAL CONFERENCE ON VIBRATION, SOUND AND SYSTEM DYNAMICS (ICVSSD 2022): AIP Conference Proceedings
- Surface degradation analysis of roller bearing lubricated with palm oil-based grease - (2023) PROCEEDINGS OF THE 4TH INTERNATIONAL CONFERENCE ON VIBRATION, SOUND AND SYSTEM DYNAMICS (ICVSSD 2022): AIP Conference Proceedings
- THE EFFECT OF TURBULENCE INTENSITY ON THE AERODYNAMIC PERFORMANCE OF AIRFOILS - (2001) 4th International Conference on Mechanical Engineering (ICME)
- Transmission loss analysis of muffler with micro-perforated panel - (2010) 2010 International Conference on Advances in Mechanical Engineering (ICAME 2010)
- Wind noise analysis of a two-way radio - (2013) 2013 IEEE International Conference on Smart Instrumentation, Measurement and Applications (ICSIMA)
- Article
- Scopus
- Article
- A friction model for dry contacts during metal-forming processes - (2010) International Journal of Advanced Manufacturing Technology, 51(1-4), pp. 93–102
- A preliminary biomechanical assessment and user perceptions of a motorized lifter for patient transfer - (2024) Assistive Technology: Taylor and Francis Ltd.
- A static friction model for tube bulge forming using a solid bulging medium - (2009) International Journal of Advanced Manufacturing Technology, 43(3-4), pp. 238–247
- A study on high ratio cup drawing by Maslennikov's process - (2012) International Journal of Advanced Manufacturing Technology, 58(5-8), pp. 503–520
- A technique to measure surface asperities plastic deformation and wear in rolling contact - (2016) Wear: Elsevier Ltd, 368-369, pp. 496–504
- Acoustic attenuation performance analysis and optimisation of expansion chamber coupled micro-perforated cylindrical panel using response surface method - (2021) Archives of Acoustics: Polska Akademia Nauk, 46(3), pp. 507–517
- An approach to mechanization and automation of manual construction activity - (2011) International Review of Mechanical Engineering, 5(7), pp. 1266–1271
- An In-Laboratory Validity and Reliability Tested System for Quantifying Hand-Arm Tremor in Motions - (2018) IEEE Transactions on Neural Systems and Rehabilitation Engineering: Institute of Electrical and Electronics Engineers Inc., 26(2), pp. 460–467, 8186225
- Analysis of deep drawing of sheet metal using the Marform process - (2012) International Journal of Advanced Manufacturing Technology, 59(5-8), pp. 491–505
- Analysis of exhaust muffler with micro-perforated panel - (2013) Journal of Vibroengineering, 15(2), pp. 558–573
- Analysis of friction excited vibration of drum brake squeal - (2013) International Journal of Mechanical Sciences, 67, pp. 59–69
- Analysis of Impact Attenuation in 3D Printed Hip Protectors: A Support Vector Regression Approach - (2024) Nigerian Journal of Technological Development: University of Ilorin, Faculty of Engineering and Technology, 21(3), pp. 98–105
- Analysis of piston secondary motion - (2013) Journal of Sound and Vibration, 332(20), pp. 5162–5176
- Analysis of Surface Parameters and Vibration of Roller Bearing - (2014) Tribology Transactions: Taylor and Francis Inc., 57(4), pp. 715–729
- Anti-friction and Wear Resistance Performance of Palm Olein Grease with Molybdenum Disulfide Additive - (2024) Pertanika Journal of Science and Technology: Universiti Putra Malaysia Press, 32(3), pp. 1023–1042
- Application design for modularity approach to enhance platform architecture - (2006) Journal of Applied Sciences, 6(7), pp. 1513–1519
- Application of IDEF3 process description capture to mechanize manual tile installation - (2011) International Review of Mechanical Engineering, 5(7), pp. 1287–1294
- Assessment of the force attenuation capability of 3D printed hip protector in simulated sideways fall - (2021) Materials Research Express: IOP Publishing Ltd, 8(1), 015401
- Biomechanical System Versus Observational Rating Scale for Parkinson’s Disease Tremor Assessment - (2019) Scientific Reports: Nature Publishing Group, 9(1), 8117
- Choosing the right patient transfer assistive device: Application of confidence ellipse quadrant analysis for decision-making - (2024) International Journal of Industrial Ergonomics: Elsevier B.V., 103, 103628
- Combined experimental and numerical analysis of bulge test at high strain rates using split Hopkinson pressure bar apparatus - (2010) Journal of Materials Processing Technology, 210(8), pp. 1061–1069
- Computer aided modelling of friction in rubber-pad forming process - (2009) Journal of Materials Processing Technology, 209(10), pp. 4925–4934
- Design and optimization of piezoelectric fans for cooling of microelectronic devices - (2007) Journal of Microelectronics and Electronic Packaging: IMAPS-International Microelectronics and Packaging Society, 4(3), pp. 121–128
- Design of the mounting system of a grass trimmer engine for minimum handle vibration response based on frequency-dependent stiffness and loss factor properties - (2015) Journal of Vibroengineering: Vibromechanika, 17(5), pp. 2155–2166
- Determination of maintainability index based on assembly criteria - (2006) Journal of Applied Sciences, 6(12), pp. 2586–2592
- Dynamic stiffness and loss factor measurement of engine rubber mount by impact test - (2011) Materials and Design, 32(4), pp. 1880–1887
- Effect of drum radius variation on the brake torque variation and brake factor - (2013) International Journal of Vehicle Design: Inderscience Publishers, 63(4), pp. 404–422
- Effect of friction models on stress distribution of sheet materials during V-bending process - (2009) World Academy of Science, Engineering and Technology, 56, pp. 654–659
- Effects of patient transfer devices on the risk of work-related musculoskeletal disorders: a systematic review - (2023) International Journal of Occupational Safety and Ergonomics: Taylor and Francis Ltd., 29(2), pp. 494–514
- Effects of tip gap and amplitude of piezoelectric fans on the performance of heat sinks in microelectronic cooling - (2012) Heat and Mass Transfer/Waerme- und Stoffuebertragung, 48(6), pp. 893–901
- Electroless Ni-P-Cg(graphite)-SiC composite coating and its application onto piston rings of a small two stroke utility engine - (2010) Journal of Scientific and Industrial Research, 69(11), pp. 830–834
- Evaluation of a motorised patient transfer device based on perceived workload, technology acceptance, and emotional states - (2024) Disability and Rehabilitation: Assistive Technology: Taylor and Francis Ltd., 19(3), pp. 938–950
- Evaluation of acoustic performance of cascaded cylindrical micro-perforated panel - (2023) Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications: SAGE Publications Ltd, 237(5), pp. 1146–1158
- Experimental and finite element analysis of surface asperity geometry during the running-in phase of rolling contact - (2024) Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science; SAGE Publications Ltd, 238(19), pp. 9698–9710
- Experimental Study of Surface Asperity Deformation in the Running-In of Rolling Contacts - (2022) Tribology Transactions: Taylor and Francis Ltd., 65(6), pp. 1099–1109
- Factors associated with vascular and neurological complications of hand-arm vibration syndrome among tire shop workers in Kelantan, Malaysia - (2021) Journal of Occupational Health: John Wiley and Sons Inc, 63(1), e12220
- Field measurement of hand forces of palm oil harvesters and evaluating the risk of work-related musculoskeletal disorders (WMSDs) through biomechanical analysis - (2023) International Journal of Industrial Ergonomics: Elsevier B.V., 96, 103468
- Frictional behavior of piston rings of small utility two-stroke engine under secondary motion of piston - (2011) Tribology International, 44(5), pp. 592–602
- Frictional behavior of piston rings of small utility two-stroke engine under secondary motion of piston. - (2011) Tribology International, 44(5), pp. 592–602
- Heat transfer enhancement using piezoelectric fan in electronic cooling - Experimental and numerical observations - (2012) Isi Bilimi Ve Teknigi Dergisi/ Journal of Thermal Science and Technology, 32(1), pp. 41–50
- High strain-rate bulge forming of sheet metals using a solid bulging medium - (2010) Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 224(2), pp. 257–270
- High-temperature tribological properties of Co-29Cr-6Mo alloy fabricated by selective laser melting process - (2023) Frontiers in Mechanical Engineering: Frontiers Media SA, 9, 1289450
- Impact technique for measuring global dynamic stiffness of engine mounts - (2014) International Journal of Automotive Technology: Korean Society of Automotive Engineers, 15(6), pp. 1015–1026
- In-situ surface wear assessment using a bearing area curve technique - (2022) Tribology - Materials, Surfaces and Interfaces: Taylor and Francis Ltd., 16(3), pp. 235–244
- Investigation of Motorcycle Handle Vibration Attenuation Using a Suspended Handlebar With Different Rubber Mount Characteristics - (2022) International Journal of Acoustics and Vibrations: International Institute of Acoustics and Vibrations, 27(3), pp. 276–284
- Investigation of Wear and Friction Behavior of Cobalt-Chromium-Molybdenum Alloy Produced by Laser Powder Bed Fusion - (2023) Applied Sciences (Switzerland): Multidisciplinary Digital Publishing Institute (MDPI), 13(19), 10582
- Lifetime vibration dose correlates with severity of the neurological component of hand-arm vibration syndrome among tyre shop workers in Kelantan, Malaysia - (2021) International Journal of Occupational Safety and Ergonomics: Taylor and Francis Ltd., 27(2), pp. 410–415
- MODELING OF CUTTING FORCE FOR PALM OIL FRONDS - (2023) Engenharia Agricola: Sociedade Brasileira de Engenharia Agricola, 43(4), e20230081
- Modeling of microindentation with consideration of the surface roughness - (2013) Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science: Springer Boston, 44(13), pp. 5676–5687
- Modelling of kinetic friction in V-bending of ultra-high-strength steel sheets - (2010) International Journal of Advanced Manufacturing Technology, 46(1-4), pp. 101–110
- Motion characteristics of subclinical tremors in Parkinson’s disease and normal subjects - (2022) Scientific Reports: Nature Research, 12(1), 4021
- Musculoskeletal complications of hand–arm vibration syndrome among tyre shop workers in Kelantan, Malaysia - (2022) International Journal of Occupational Safety and Ergonomics: Taylor and Francis Ltd, 28(1), pp. 213–222
- Near-1: the evaluation of usability and task load demand of a motorized lifter for patient transfer - (2024) Disability and Rehabilitation: Assistive Technology: Taylor and Francis Ltd., 19(4), pp. 1531–1538
- Nodal control of grass trimmer handle vibration - (2013) International Journal of Industrial Ergonomics, 43(1), pp. 18–30
- Numerical and experimental investigations on effect of fan height on the performance of piezoelectric fan in microelectronic cooling - (2009) International Communications in Heat and Mass Transfer, 36(1), pp. 51–58
- Numerical simulation of sheet stamping process using flexible punch - (2009) Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 223(7), pp. 829–840
- Optimization of an engine mounting system with consideration of frequency-dependent stiffness and loss factor - (2016) JVC/Journal of Vibration and Control: SAGE Publications Inc., 22(10), pp. 2406–2419
- Optimization of double-layered micro-perforated panels with vibro-acoustic effect - (2016) Journal of the Brazilian Society of Mechanical Sciences and Engineering: Springer Verlag, 38(3), pp. 745–760
- Optimization of the Impact Attenuation Capability of Three-Dimensional Printed Hip Protector Produced by Fused Deposition Modeling Using Response Surface Methodology - (2023) 3D Printing and Additive Manufacturing: Mary Ann Liebert Inc., 10(5), pp. 971–983
- Optimization of tile laying process parameters using taguchi's method - (2011) International Review of Mechanical Engineering, 5(7), pp. 1258–1265
- Optimizing the bearing vertical offset of a marine propeller shaft system - (2024) Proceedings of the Institution of Mechanical Engineers Part M: Journal of Engineering for the Maritime Environment: SAGE Publications Ltd
- Plastic bulging of sheet metals at high strain rates - (2010) International Journal of Advanced Manufacturing Technology, 48(9-12), pp. 847–858
- Prevalence of hand-arm vibration syndrome among tyre shop workers in Kelantan, Malaysia - (2019) Journal of Occupational Health: John Wiley and Sons Inc., 61(6), pp. 498–507
- Psychoacoustics annoyance analysis for two way radio under wind noise - (2016) ARPN Journal of Engineering and Applied Sciences: Asian Research Publishing Network, 11(3), pp. 2120–2124
- Quantifying the surface roughness effect in microindentation using a proportional specimen resistance model - (2013)Journal of Materials Science, 48(18), pp. 6293–6306
- REBA assessment of patient transfer work using sliding board and Motorized Patient Transfer Device - (2022) International Journal of Industrial Ergonomics: Elsevier B.V., 90, 103322
- Resistance end correction factor of microperforated panel made using additive manufacturing - (2021) Engineering Science and Technology, an International Journal: Elsevier B.V., 24(6), pp. 1281–1291
- Sheet metal forming with the aid of flexible punch, numerical approach and experimental validation - (2010) CIRP Journal of Manufacturing Science and Technology, 3(3), pp. 196–203
- Structural dynamic modification of an active suspended handle with a parallel coupled piezo stack actuator - (2016) Proceedings of the Institution of Mechanical Engineers. Part I: Journal of Systems and Control Engineering: SAGE Publications Ltd, 230(2), pp. 130–144
- Technique of Measuring Piston Secondary Motion Using Laser Displacement Sensors - (2012) Experimental Mechanics: Springer Science and Business Media, LLC, 52(9), pp. 1447–1459
- Technique to determine instantaneous piston skirt friction during piston slap - (2014) Tribology International: Elsevier Ltd, 74, pp. 145–153
- The design and development of suspended handles for reducing hand-arm vibration in petrol driven grass trimmer - (2011) International Journal of Industrial Ergonomics, 41(5), pp. 459–470
- The effective frequency range of an active suspended handle based on the saturation effects of a piezo stack actuator - (2017) JVC/Journal of Vibration and Control: SAGE Publications Inc., 23(5), pp. 752–769
- The operational deflection shapes and transient analysis of the brake shoes in drum brake squeal - (2013) Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering: SAGE Publications Ltd, 227(6), pp. 866–884
- The size effect of molybdenum disulphide additives on friction and wear performance of lithium-thickened palm olein grease - (2024) Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology: SAGE Publications Ltd, 238(6), pp. 641–652
- The tribological performance analysis of palm olein-based grease lubricants containing copper nanoparticle additive - (2023) Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology: SAGE Publications Ltd, 237(12), pp. 2162–2177
- Thermodynamic and Economic Analysis of a Phosphoric Acid Fuel Cell Combined Heating Cooling and Power System - (2024) Energies: Multidisciplinary Digital Publishing Institute (MDPI), 17(16), 4038
- Thermodynamic, economic and regulation strategies analysis of a phosphoric acid fuel cell combined heating and cooling - (2024) Results in Engineering: Elsevier B.V., 24, 103331
- Tuned vibration absorber for suppression of hand-arm vibration in electric grass trimmer - (2011) International Journal of Industrial Ergonomics, 41(5), pp. 494–508
- Utilization of design for assembly guideline to enhance product maintainability - (2007) Journal of Applied Sciences: Asian Network for Scientific Information, 7(21), pp. 3234–3241
- Validation of Electronic Weighing Device for Vertical Ground Reaction Force and Centre of Pressure Measurement; and Clinical Metrics Derivation - (2024) Malaysian Journal of Fundamental and Applied Sciences: Penerbit UTM Press, 20(4), pp. 888–901
- Book
- Rubber-pad forming processes: Technology and applications - (2012) Rubber-Pad Forming Processes: Technology and Applications: Elsevier, pp. 1–285
- Rubber-pad forming processes: Technology and applications. - (2012) Rubber-Pad Forming Processes: Technology and Applications: Woodhead Publishing Limited
- Conference Paper
- A Process Capture Method for Patient Transfer Processes - (2023) AIP Conference Proceedings: American Institute of Physics Inc., 2959(1), 080007
- A Review of Robotics in Trunk Rehabilitation - (2023) AIP Conference Proceedings: American Institute of Physics Inc., 2959(1), 080001
- Active vibration control using PID-AFC controller of the piezo stack actuator with consideration to hysteresis and saturation effects - (2017) 24th International Congress on Sound and Vibration, ICSV 2017: International Institute of Acoustics and Vibration, IIAV
- Assessment of Task Load Demand and Technology Acceptance of a Hoist and Walking Belt for Patient Transfer among Nurses - (2023) AIP Conference Proceedings: American Institute of Physics Inc., 2959(1), 080006
- Attenuation of Motorcycle Handle Vibration Using Dynamic Vibration Absorber - (2018) MATEC Web of Conferences: EDP Sciences, 217, 01006
- Attenution of Motorcycle Handle Vibration using Suspended Handlebar - (2020) IOP Conference Series: Materials Science and Engineering: Institute of Physics Publishing, 815(1), 012013
- Comparison of Trunk Parameters and its Application in an Automated REBA System: A Pilot Study - (2023) AIP Conference Proceedings: American Institute of Physics Inc., 2959(1), 080008
- Correlation between PWM modulation of an induction motor inverter and radiated electromagnetic acoustic noise - (2014) Proceedings - 4th IEEE International Conference on Control System, Computing and Engineering, ICCSCE 2014: Institute of Electrical and Electronics Engineers Inc., pp. 267–272, 7072728
- Design and Analysis of Thermomechanical Cautery System - (2023) AIP Conference Proceedings: American Institute of Physics Inc., 2959(1), 080002
- Development of a low-cost modular pole climbing robot - (2000) IEEE Region 10 Annual International Conference, Proceedings/TENCON, 1
- Development of a Lower Limb Stroke Rehabilitation Machine - (2018) MATEC Web of Conferences: EDP Sciences, 217, 02004
- Development of an Ultrasonic Scalpel - (2020) IOP Conference Series: Materials Science and Engineering: Institute of Physics Publishing, 815(1), 012014
- Development of Custom-Made Serious Game for Trunk Post-Stroke Rehabilitation - (2023) AIP Conference Proceedings: American Institute of Physics Inc., 2959(1), 080003
- Development of wearable inertial sensors for measurement of hand arm tremors - (2013) 2013 IEEE International Conference on Smart Instrumentation, Measurement and Applications, ICSIMA 2013, 6717926
- Dynamic analysis of engine mounts at different orientations - (2010) Proceedings of SPIE - The International Society for Optical Engineering, 7522, 752238
- Effect of Femur Geometry on Hip Protectors Testing System - (2020) IOP Conference Series: Materials Science and Engineering: Institute of Physics Publishing, 815(1), 012017
- Effect of heat treatment on Ni-P-Cg(graphite)-SiC composite coated cast alsi alloy - (2013) Advanced Materials Research, 795, pp. 545–549
- Effect of piezoelectric fan height on flow and heat transfer for electronics cooling applications - (2008) 2008 10th International Conference on Electronic Materials and Packaging, EMAP 2008, pp. 165–170, 4784255
- Electrical-thermal interaction study of electrical busway using finite element analysis - (2017) AIP Conference Proceedings: American Institute of Physics Inc., 1865, 080006
- Electroless Ni-P-Cg(graphite)-SiC composite coating on cast AlSi alloy - (2013) Advanced Materials Research, 795, pp. 540–544
- Environmentally Friendly Cure for Railway Wear and Curve Squeal? Proposal for Palm Oil-Based Grease as a Friction Modifier - (2023) AIP Conference Proceedings: American Institute of Physics Inc., 2959(1), 050001
- Evaluation of Composite Made from Palm Oil Fibres as Sound Absorber - (2023) AIP Conference Proceedings: American Institute of Physics Inc., 2959(1), 030004
- Friction and Wear Characteristics of TiC Surface Coatings in a Small Two-Stroke Utility Engine - (2008) SAE Technical Papers: SAE International, Part F127627(September)
- Integration of low frequency electromagnetic generator with low threshold voltage diode multiplier circuitry - (2015) 2nd International Symposium on Technology Management and Emerging Technologies, ISTMET 2015 - Proceeding: Institute of Electrical and Electronics Engineers Inc., pp. 44–48, 7358998
- Investigation of Trunk Muscle Activation across Different Neurological Disease Recovery Outcome Assessments: A Preliminary Study Using Healthy Subjects - (2023) AIP Conference Proceedings: American Institute of Physics Inc., 2959(1), 080004
- Pathological hand tremor measurement—challenges and advances - (2018) IFMBE Proceedings: Springer Verlag, 67, pp. 3–8
- Piezo stack actuator saturation control of the coupled active suspended handle-die grinder using various PID-anti-windup control schemes - (2017) Proceedings - 6th IEEE International Conference on Control System, Computing and Engineering, ICCSCE 2016: Institute of Electrical and Electronics Engineers Inc., pp. 22–27, 7893539
- Predicting combined-cycle natural gas power plant emissions by using artificial neural networks - (2000) IEEE Region 10 Annual International Conference, Proceedings/TENCON, 3
- Preliminary Evaluation of Active Tremor Cancellation Spoon for Patients with Hand Tremor - (2020) IOP Conference Series: Materials Science and Engineering: Institute of Physics Publishing, 815(1), 012002
- Simulation of Flow Distribution Inside Small Cavity at Two Way Radio by CFD (Ansys Fluent) - (2020) Lecture Notes in Mechanical Engineering: Lecture Notes in Mechanical Engineering, pp. 393–398, 2020, pp. 393–398
- Some design issues of piezoelectric resonating structure for cooling of microelectronic components - (2004) Proceedings of 6th Electronics Packaging Technology Conference, EPTC 2004, pp. 264–269, C2.3
- Sound quality analysis for two-way radio under wind noise - (2013) 2013 IEEE International Conference on Smart Instrumentation, Measurement and Applications, ICSIMA 2013, 6717946
- Static Analysis of Railway Curve Squeal Using the Finite Element Method - (2023) AIP Conference Proceedings: American Institute of Physics Inc., 2959(1), 050003
- Surface And Vibration Analysis of Spur Gear Lubricated with Palm Olein-Based Grease - (2023) AIP Conference Proceedings: American Institute of Physics Inc., 2959(1), 050004
- Surface Degradation Analysis of Roller Bearing Lubricated with Palm Oil-based Grease - (2023) AIP Conference Proceedings: American Institute of Physics Inc., 2959(1), 050005
- Test Condition Optimization for Testing of Hip Protectors - (2020) IOP Conference Series: Materials Science and Engineering: IOP Publishing Ltd, 920(1), 012029
- The Effect of Lubrication on the Vibration of Roller Bearings - (2018) MATEC Web of Conferences: EDP Sciences, 217, 01004
- Transmission Loss Analysis of Simple Expansion Tube with Micro-perforated Cylindrical Panel - (2020) IOP Conference Series: Materials Science and Engineering: Institute of Physics Publishing, 815(1), 012008
- Understanding the Interaction between Stroke Patients and a Trunk Rehabilitation Device: Insight from the Technology Acceptance Model - (2023) AIP Conference Proceedings: American Institute of Physics Inc., 2959(1), 080005
- Wind noise analysis of a two-way radio - (2013) 2013 IEEE International Conference on Smart Instrumentation, Measurement and Applications, ICSIMA 2013, 6717945
- Editorial
- Preface NVC 2023 - (2024) Journal of Physics: Conference Series: Institute of Physics, 2721(1), 011001
- Review
- 4D Printing in Biomedical Engineering: Advancements, Challenges, and Future Directions - (2023) Journal of Functional Biomaterials: Multidisciplinary Digital Publishing Institute (MDPI), 14(7), 347
- An Overview of Enhancing the Performance of Medical Implants with Nanocomposites - (2023) Journal of Composites Science: MDPI, 7(5), 199
- Efficacy of Interventions in Reducing the Risks of Work-Related Musculoskeletal Disorders Among Healthcare Workers: A Systematic Review and Meta-Analysis - (2023) Workplace Health and Safety: SAGE Publications Inc., 71(12), pp. 557–576
- Efficacy of lifting devices for wheelchair transfers: a systematic review and meta-analysis - (2024) Ergonomics: Taylor and Francis Ltd.
- Occupant safety and injuries in coach frontal collision: a literature review - (2024) Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering: SAGE Publications Ltd
- Superlubricity of Materials: Progress, Potential, and Challenges - (2023) Materials: Multidisciplinary Digital Publishing Institute (MDPI), 16(14), 5145
- Surface Engineering of Metals: Techniques, Characterizations and Applications - (2023) Metals: Multidisciplinary Digital Publishing Institute (MDPI), 13(7), 1299
- Test systems for the biomechanical evaluation of hip protectors: a systematic review - (2020) Osteoporosis International: Springer, 31(1), pp. 43–58
- Article
Engineering Library USM @ 2017