Biji getah dianggap sebagai bahan buangan yang diperolehi daripada
penanaman pokok getah berpotensi digunakan sebagai bahan pembuatan biodiesel.
Analisis hampiran biji getah menunjukkan bahawa kadar kelembapan adalah
sebanyak 6.5%, kadar protein, lemak dan abu adalah masing-masing sebanyak
0.20g/g, 0.62g/g dan 0.03g/g. Dalam kajian ini, minyak biji getah diekstrak daripada
biji tersebut dengan menggunakan kaedah ultrasonik. Kesan beberapa parameter
pengekstrakan seperti nisbah pelarut kepada biji, suhu pengekstrakan dan masa
pengekstrakan telah dikaji. Keputusan menunjukkan bahawa hasil maksimum
pengekstrakan adalah sebanyak 22% apabila nisbah pelarut kepada biji ialah 10:1,
suhu pengekstrakan pada 45°C dan masa pengekstrakan selama 50 min. Minyak
yang diekstrak dijadikan biodiesel melalui proses esterifikasi dengan menggunakan
metanol sebagai alkohol dan sulfurik asid sebagai agen pemangkin asid. Parameter
yang diambil kira dalam eksperimen ini adalah nisbah metanol kepada minyak biji
getah, beban pemangkin asid, dan suhu tindak balas. Keputusan menunujukkan
bahawa hasil maksimum biodiesel adalah sebanyak 12% apabila nisbah metanol
kepada minyak biji getah ialah 10:1 dengan kehadiran sulfurik asid sebanyak 0.5%
(v/v) pada 50°C suhu tindak balas.
_______________________________________________________________________________________________________
Rubber seed which was considered as waste products from the rubber
plantations can be used as a potential source for biodiesel production. Proximate
analysis of the seeds showed that the moisture content was 6.5 %, protein, fat and ash
yield at 0.20g/g, 0.62g/g and 0.03g/g, respectively. In this study, the rubber seed oil
was extracted from the seeds using an ultrasonic method. The effect of various
extraction parameters such as solvent to seed ratio, extraction temperature and
extraction time were looked at. Results showed that the maximum extraction yield of
rubber seed oil was 22% when the extraction variables were ratio of solvent to seed
at 10:1, extraction temperature 45°C and extraction period 50 min. The extracted oil
was converted into biodiesel via an esterification process using methanol as the
alcohol in the presence of sulfuric acid as an acid catalyst. The reaction parameters
that have been considered in this experiment were methanol to rubber seed oil molar
ratio, acid catalyst loading and reaction temperature. The results showed that the
highest yield of biodiesel was 12% when the ratio of methanol to rubber seed oil was
4:1 in presence 0.50 % (v/v) of sulfuric acid at a reaction temperature of 50°C.