Implimentasi awal yang terperinci dan sistematik bagi papan litar bercetak (PCB) FR4 untuk
pencirian pembezaan pencampur telah dinyatakan dalam tesis ini. Pembezaan pencampur telah
dimplimentasikan untuk beroperasi dalam frekuensi RF pada 70 MHz dan frekuensi LO pada 970
MHz. Rangkaian keserasian keluaran dioptimumkan untuk keluaran frekuensi pada 900 MHz.
Kemudian, simulasi litar pembezaan pencampur dijalankan bagi mentakrifkan titik persilangan
ketiga, kehilangan kuasa pemampat 1 dB dan angka hingar tepian jalur tunggal. Kesan surih
pada PCB adalah 2.6 mm dimana ia ditentukan dalam pengiraan pada pencirian impedans, Z0
bagi 50 W. Simulasi pembezaan pencampur memberi keputusan OIP3 pada 8.72 dBm, IIP3
pada 5.78 dBm dan P1dB pada 2.45 dBm. Pencirian simulasi dibandingkan dengan pencirian
cip pembezaan pencampur, MAX2673.
_________________________________________________________________________________________
A detailed and systematic preliminary work for FR4 printed circuit board (PCB) implementation
of differential mixer characterization is presented in this thesis. The differential mixer is
implemented for operation with an RF frequency of 70 MHz and LO frequency of 970 MHz. The
output matching network is optimized for an output frequency of 900 MHz. Next, the differential
mixer circuit simulation is carried out to define the third order intercept point, 1 dB compression
power dissipation and the single sideband noise figure. The trace width of PCB is 2.6 mm, which
is determined by calculation at characteristic impedance, Z0 of 50 W. The differential mixer simulation
resulting in OIP3 of 8.72 dBm, IIP3 of 5.78 dBm and P1dB of 2.45 dBm. The simulation
characteristics are compared to the characteristic of the differential mixer chip, MAX2673.