Penduduk Malaysia semakin meningkat dengan pesat dari tahun ke tahun. Dengan
pertumbuhan penduduk, penggunaan tanah akan meningkat dengan ketara dan banyak
projek kejuruteraan awam akan dijalankan di kawasan bukit. Kaedah pemasangan
tembok penahan boleh menjadi faktor untuk mengurangkan masa pemasangan untuk
mengawal cerun daripada runtuh. Kajian ini menunjukkan penggunaan Unplastisized
Polyvinyl Chloride (UPVC) tiub untuk menahan cerun daripada runtuh. Dua ujian telah
dijalankan iaitu ujian mampatan dan ujian ricih terus. Untuk ujian mampatan, min
kekuatan mampatan maksimum tiub UPVC dengan ketinggian 200mm, 250mm, dan
300mm adalah 10.33kN, 14.79kN dan 10.10kN masing-masing. UPVC dengan
ketinggian 250mm telah dipilih untuk diuji dengan pasir sebagai bahan yang diisi.
Melalui ujian ini, ia menunjukkan bahawa bahan yang diisi memainkan peranan yang
penting untuk memaksimumkan kekuatan mampatan. Makmal ujian ricih terus
digunakan dengan meluas untuk menentukan sudut geseran dan kejelekitan untuk pasir.
Ujian ini diuji untuk sampel pasir sahaja dan jejalur UPVC dengan pasir. Ujian beban
dengan skala kecil dijalankan untuk mengkaji prestasi tiub UPVC apabila beban
diletakkan di atas tambakan belakang.
_______________________________________________________________________________________________________
Malaysian citizen are increasing rapidly year by year. As the population growth, land
use will increase significantly and there will be more civil engineering project will be
carried out in hilly area. Method of installation retaining wall may be factor a factor of
reducing installation time to control slope from collapse. This study presents the use of
Unplastisized Polyvinyl Chloride (UPVC) tube to protect slope from collapsing. Two
tests were carried out which are Compressive test and Direct Shear test. For
compressive test, mean for maximum compressive strength of UPVC tube with height
of 200mm, 250mm, and 300mm are 10.33kN, 14.79kN and 10.10kN respectively.
UPVC with height 250mm was selected to test with sand as filled material. From the
test, it shows that filled material plays an important role to maximize the compressive
strength. Laboratory direct shear test is extensively used to determine the angle of
friction and cohesion. This test conducted for sand only and stripped UPVC with sand.
Small scale of load test was carried out to study the performance of UPVC tube when
loading is applied on top of backfilled.