Tesis ini membentangkan reka bentuk algoritma protokol pintar untuk merangsang dan mengawal lampu jalan dalam kawasan perumahan. Sistem lampu jalan ini telah membawa keadaan yang jelas dan selamat kepada kawasan perumahan. Berdasarkan penyelidikan dan kerja sebelum ini, sistem lampu jalan secara automatik ini hanya melibatkan penggunaan perintang depandat cahaya untuk mengaktifkan sistem tersebut. Sistem sebelumnya hanya mempertimbangkan waktu untuk mengaktifkan sistem lampu jalan dan kurang memberi tumpuan kepada bagaimana untuk mengawal lampu jalan bagi setiap jalan dan persimpangan di kawasan perumahan. Pada masa yang sama, sistem sebelum ini juga tiada struktur algoritma yang telah ditetapkan untuk kawalan lampu jalan. Oleh itu, algoritma protokol pintar dibangunkan untuk menggantikan sistem sebelumnya. Reka bentuk baru sistem lampu jalan ini akan dirangsang untuk mengawal lampu jalan bagi lebih banyak persimpangan dan jalan berdasarkan kehadiran penduduk dan kenderaan dengan menggunakan sensor inframerah. Prototaip terakhir ini telah dibangunkan dengan menggunakan algoritma protokol kawalan untuk mengaktifkan sistem dan mengawal semua lampu jalan secara serentak berdasarkan kehadiran objek. Prototaip sistem lampu jalan diuji untuk dibangunkan dengan baik dan berfungsi dengan baik dengan menggunakan beberapa jenis keadaan dan kes.
_______________________________________________________________________________________________________
This thesis presents the design of the smart protocol algorithms for simulating and controlling the residential street light. The automatic street lighting system will provide a clear and safe environment to the residential area. Based on the previous research and previous works, the automatic street lighting system is only considered by using Light Dependent Resistor (LDR) to activate the system. The previous system only considers the time to activate the street light system and less focus on how to control the street light for each street and junction in the residential area. At the same time, there is no stated or predefined algorithm structure used for the street light control. Thus, smart protocol algorithm is developed to replace the previous system. The new design of the street light system will be stimulated to control the street lights more junctions and streets based on the presence of the residents and vehicles by using infrared sensors. The final prototype is developed by using the control protocol algorithm to activate the system and control all the street lights simultaneously based on the presence of objects. The street light system prototype is tested to be well-developed and well-functioned by applying a few type of conditions and cases.