Kapasiti penjerapan rendah mineral tanah liat semula jadi adalah isu teknikal dan
ekonomi yang menghadkan permohonan perindustrian mereka sebagai bahan penyerap
kos rendah untuk penyingkiran logam berat daripada air sisa. Dalam kajian ini, telah
memberi tumpuan kepada proses penjerapan melalui kaedah lapisan yang nipis lapisan
adsorben bersalut. Kajian ini telah menyumbang kepada pengeluaran salutan adsorben
menggunakan 'Paintosorp'. Paintosorp sebagai cat mesra alam sekitar terdiri daripada
adsorben yang bentonit, pengikat berasaskan air dan air suling sebagai penyelesaian
untuk teknik penyingkiran logam berat. Kelakuan penjerapan Paintosorp berkenaan
dengan Cu2+ dan Zn2+ telah dikaji untuk menimbangkan permohonan untuk pembersihan
air sisa. Kaedah kumpulan telah bekerja, dengan menggunakan kepekatan logam dalam
larutan yang terdiri daripada 10 mg / L hingga 50 mg / L. Penyingkiran peratusan dan
tahap pengambilan ion logam telah ditentukan bagi penjerapan. Eksperimen telah
dijalankan sebagai fungsi kepekatan logam, penyelesaian pH, kelajuan pencampuran dan
suhu. Penyingkiran peratusan ion logam meningkat dengan penurunan dalam kepekatan
ion logam awal. Pengaruh pH penyelesaian ion logam pada tahap pengambilan ion
logam telah dijalankan antara pH 3 dan pH 11. pH optimum untuk tembaga dan zink
penyingkiran adalah pH 5. Paintosorp dicirikan menggunakan teknik SEM. The
Langmuir dan Freundlich model penjerapan telah digunakan untuk menggambarkan
garisan sesuhu keseimbangan.
_______________________________________________________________________________________________________
Low adsorption capacity of natural clay minerals is a technical and economic
issue which limits their industrial application as low cost absorbents for removal of
heavy metals from wastewater. In this study, has been focused on adsorption process
through coating method which is thin coated adsorbent layer. This research has
contributed to the production of adsorbent coating using ‘Paintosorp’. Paintosorp as an
environmental friendly paint was made up from adsorbent which is bentonite, waterbased
binder and distilled water as a solution for heavy metal removal techniques. The
adsorption behaviour of Paintosorp with respect to Cu2+ and Zn2+ has been studied in
order to consider its application to the purification of wastewater. The batch method has
been employed, using metal concentrations in solution ranging from 10 mg/L to 50
mg/L. The percentage removal and uptake level of metal ions were determined for the
adsorption. Experiments were carried out as a function of concentration of metals,
solution pH, mixing speed and temperature. The percentage removal of metal ions
increases with a decrease in the initial metal ion concentration. The influence of the pH
of the metal ion solutions on the uptake levels of the metal ions were carried out
between pH 3 and pH 11. The optimum pH for copper and zinc removal was pH 5. The
Paintosorp is characterized using SEM techniques. The Langmuir and Freundlich
adsorption models were applied to describe the equilibrium isotherms.