Prestasi pemisahan membran seramik komersial telah dikaji dalam pemisahan air daripada campuran aseton-air dengan menggunakan proses membrane secara pervaporasi. Membran seramik komersial yang diperolehi daripada PERVATECH BV, The Netherland telah digunakan untuk mengkaji interaksi antara pembolehubah proses dengan prestasi pemisahan yang tersendiri yang ditunjukkan oleh membran seramik. Pengaruh suhu suapan, komposisi suapan dan tekanan vakum terhadap prestasi membran yang merangkumi fluks penelapan dan kememilihan telah dikaji dengan menggunakan rekabentuk eksperimen (DOE) yang digabungkan dengan metodologi permukaan sambutan (RSM). Rekabentuk komposit tengah (CCD) juga telah digunakan untuk mendapatkan keadaan process operasi yang optimum. Keputusan kajian telah menunjukkan bahawa fluks penelapan optimum setinggi 0.628 kg/m2.j dan kememilihan optimum sebanyak 3308.05 boleh didapati pada suhu suapan 60 °C, komposisi suapan aseton 98 wt% dan tekanan vakum 11 torr.
_______________________________________________________________________________________________________
The separation performance of the commercial ceramic membrane was studied for the removal of water from acetone-water mixture using pervaporation membrane process. The commercial ceramic membrane supplied by PERVATECH BV, The Netherland was used to investigate the interaction between process variables with the characteristic performance of ceramic membrane. The effects of feed temperature, feed composition and vacuum pressure on the membrane separation performance, which were the permeation flux and selectivity were studied by means of Design of Experiments (DOE) coupled with Response Surface Methodology (RSM). The Center Composite Design (CCD) was used to obtain the optimum process conditions. The results showed that an optimum permeation flux of 0.628 kg/m2.h and optimum selectivity of 3308.05 can be obtained at feed temperature of 60 °C, vacuum pressure of 11 torr and acetone feed concentration of 98 wt%.