Terdapat pelbagai jenis ujian konkrit di-situ yang dilaksanakan kini. Antara ujian
yang lazim dilaksanakan ialah ujian kekuatan mampatan teras yang diperolehi daripada
struktur sedia ada. Di dalam ujian ini struktur konkrit yang dibina digerudi untuk
mendapatkan sampel teras dan kemudian diuji bagi mendapatkan satu nilai kekuatan ciri
konkrit. Namun begitu ujian ini merupakan satu ujian yang berisiko tinggi di mana
terdapat beberapa permasalahan yang berlaku terhadap struktur konkrit tersebut. Berikutan
itu, satu ujian baru cuba dihasilkan dengan menggunakan teori yang sama iaitu dengan
melaksanakan kaedah yang dipanggil ujian kekuatan mampatan teras mikro agar dapat
mengatasi permasalahan terhadap ujian yang sedia ada. Maka dengan ini tujuan
penyelidikan ini dilaksanakan adalah untuk mendapatkan satu hubungan antara kekuatan
mampatan teras mikro dengan kekuatan mampatan kiub piawai, untuk digunakan sebagai
rujukan dalam mentafsirkan kekuatan konkrit di tapak binaan. Sebanyak 150 sampel teras
mikro dan 30 kiub piawai (150mm x 150mm x 150mm) mengikut 5 jenis campuran
konkrit digunakan didalam penyelidikan ini. Sampel konkrit telah diuji pada umur 7 dan
28 hari. Hasil penyelidikan telah menunjukkan satu kolerasi yang baik di antara kekuatan
teras mikro dengan kiub piawai. Akhir sekali, segala perubahan atau maklumat di dalam
penyelidikan sampel konkrit turut diambil perhatian sebagai satu keputusan penyelidikan
yang penting berpandukan kepada beberapa rujukan yang dipercayai.
_______________________________________________________________________________________________________
Nowadays, there is a various type of in-situ concrete test that has been use. The test
that was normally used is compressive core test that obtained from the existing structure.
From this test, concrete structures were drill to get the core sample to be tested to obtain
the value of concrete strength. However, this testing had occur a lot of problem to the
structure itself, so to avoid this problem a new alternative test had been research that will
call the microcore test. Therefore, the purpose of this research is to get the relationship
between microcore and standard cube strength, as a reference to estimate the concrete
strength on site. In order to assess the applicability of the microcores tests to determine the
concrete strength in existing structure, the experimental findings obtained from
compressive test carried out on 150 microcores taken from various types of concrete are
anylized. Then, the experimental findings of microcores are compared to those obtained
on 30 test cubes. This study proves the excellent correlation between microcore and cube
strength. Finally, all changes or information in preparing concrete sample will be stated as
a very important research result according to previous research.