Logam boleh disingkirkan daripada air hujan melalui proses penjerapan, terutamanya apabila kepekatan logam adalah tinggi. Kajian ini memberi tumpuan kepada optimum proses penjerapan untuk menyingkirkan logam daripada air hujan sintetik. Keupayaan batu kapur untuk menyingkirkan logam telah disiasat dalam kajian ini. Kesan daripada dos, pH, masa sentuhan dan kelajuan aruhan dikaji untuk mencari prestasi yang terbaik dalam menyingkirkan parameter yang telah ditentukan. Isoterma penjerapan dan kinetik ditentukan. Batu kapur yang digunakan dalam kajian ini dicirikan dengan menggunakan pelbagai teknik analisis seperti pembelauan sinar-X dan pengimbasan elektron mikroskop. Berdasarkan keputusan yang diperolehi, penyingkiran mangan, besi dan plumbum adalah paling tinggi masing-masing pada dos 10g (93%), 5g (91%) dan 20g (77%). Bentuk linear diperolehi untuk Langmuir dan Freundlich pada semua parameter menunjukkan bahawa parameter telah menepati Isoterma Langmuir Model berikutan nilai R2 yang diperolehi daripada analisis adalah lebih besar daripada Isoterma Freundlich Model. Dalam kajian ini, model kinetik untuk penjerapan logam berat oleh batu kapur telah dianalisis. Keputusan yang diperolehi menunjukkan bahawa proses penjerapan dalam kajian ini telah dipasang Kedua-Pseudo Order. Oleh itu, batu kapur yang mempunyai pencapaian yang baik dalam usaha untuk mengurangkan kepekatan logam berat yang rendah daripada air hujan sintetik.
_______________________________________________________________________________________________________
Heavy metals, could be removed from rainwater by an adsorption process, especially when the concentration are high. This study focused on the optimum of adsorption process to remove heavy metals from synthetic rainwater. The capability of limestone to remove heavy metals was investigated in this research. The effect of dosage, pH, contact time and shaking speed was studied to find the best performance in removing the concern parameter. The adsorption isotherm and kinetics were determined. The limestone used in this research is characterized using various analytical techniques such as X-ray Diffraction and Scanning Electron Microscopes. Based on the obtained results, the removals of manganese, iron and lead were highest at dosage 10g (93%), 5g (91%) and 20g (77%) respectively. The linear form obtained for Langmuir and Freundlich for all the parameters shows that the parameters were fitted Langmuir Isotherm Model as the obtained R2 from the analysis is greater than Freundlich Isotherm Model. In this study, kinetic model for the adsorption of heavy metals by limestone were are analysed. The obtained results show that the adsorption of process in this study were fitted Second-Pseudo Order. Therefore, the limestone has a good performance in order to remove low concentration of heavy metals from synthetic rainwater.