Kajian terhadap kesan silica fume dan metakaolin pada sifat-sifat campuran
konkrit kekuatan tinggi yang mengandungi 0%, 10% dan 15% silica fume serta
metakaolin sebagai sebahagian penggantian terhadap simen Portland biasa. Penyelidikan
secara eksperimen telah dijalankan untuk menentukan pengaruhan kedua-dua mineral
tambahan terhadap kebolehkerjaan, perkembangan kekuatan, kekerasan permukaan,
keliangan dan kebolehtelapan konkrit kekuatan tinggi. Ujian-ujian penurunan, faktor
pemadatan, ketumpatan plastik, kekuatan mampatan, nombor Rebound, halaju dedenyut
ultrasonik, keliangan dan kebolehtelapan telah dijalankan. Spesimen-spesimen telah
diawet dalam air pada masa yang terdiri daripada 1, 3, 7, 28 sehingga 56 hari sebelum
diuji. Diperhatikan bahawa spesimen yang mengandungi 15% silica fume sebagai
penggantian sebahagian simen Portland biasa mempunyai peningkatan tertinggi dalam
kekuatan mampatan, halaju dedenyut ultrasonik, nombor Rebound, penurunan keliangan
dan kebolehtelapan pada umur konkrit 56 hari. Manakala, spesimen-spesimen yang
mengandungi metakaolin mempunyai kekuatan mampatan, halaju dedenyut ultrasonik
dan nombor Rebound yang lebih rendah daripada konkrit yang mengandungi silica fume
serta keliangan dan kebolehtelapan yang lebih tinggi berbanding dengan konkrit yang
mengandungi silica fume. Selain itu, pencampuran mineral tambahan telah menurunkan
kebolehkerjaan campuran konkrit. Walau bagaimanapun, secara umumnya, boleh
disimpulkan penambahan mineral tambahan dapat meningkatkan kekuatan mampatan,
halaju dedenyut ultrasonik, kekerasan permukaan dan ketahanlasakan konkrit kekuatan
tinggi.
_______________________________________________________________________________________________________
The effect of silica fume (SF) and metakaolin (MK) on properties of high strength
concrete mixes containing 0%, 10% and 15% silica fume and metakaolin as partial
replacement of cement has been investigated. Experimental studies have been conducted
to determine the influence of both mineral admixtures on the workability, strength
development, surface hardness, porosity and permeability of high strength concrete. The
slump, compacting factor, plastic density, compressive strength, Rebound number,
ultrasonic pulse velocity, porosity and permeability tests were performed. The specimens
were cured in water for periods varying from 1, 3, 7, 28 to 56 days before testing. It was
observed that the specimens with 15% silica fume had the highest compressive strength,
ultrasonic pulse velocity, Rebound number, lowest porosity and permeability at the age of
56 days. Whereas, the specimens with metakaolin had the compressive strength,
ultrasonic pulse velocity, Rebound number lower than the specimens with silica fume but
porosity and permeability higher than specimens with silica fume. The inclusion of
mineral admixtures reduced the workability of concrete mixes. Nevertheless, it can be
concluded that the mineral admixtures generally improved the compressive strength,
ultrasonic pulse velocity, surface hardness and durability of high strength concrete.