Dalam projek ini, pendipleks antena yang menggunakan kaedah elemen kuasi-tergumpal
yang diimplementasi pada talian penghantaran mikrostrip dibentangkan. Pendipleks antena di
reka untuk penggunaan teknologi TETRA. Frekuensi penerima untuk stesen pangkalan bagi
teknolog iTETRA adalah 0.8060 GHz hingga 0.8210 GHz manakala untuk pemancaran adalah
0.8510 GHz hingga 0.8660 GHz. Frekuensi tengah 0.8135 GHz dan 0.8585 GHz dipilih sebagai
frekuensi operasi pendipleks antena. Pendipleks terdiri daripada dua penapis laluan lulus
yang dinamakan sebagai penapis Tx (Pemancaran) dan Rx (Penerimaan). Kedua-dua penapis
laluan lulus mempunyai lebar jalur 15 MHz setiap satu dengan pemisahan frekuensi 45 MHz.
Penggunaan mikrostrip yang mempunyai Q rendah adalah satu cabaran untuk mencapai pengasingan
yang mencukupi antara kedua-dua penapis. Dua jenis pendipleks direka dan diuji;
satu dibina oleh penapis yang terdiri daripada dua penyalun dan satu lagi dibentuk oleh penapis
terdiri daripada empat penyalun. Reka bentuk dan simulasi dilakukan dengan menggunakan
CST STUDIO SUITE manakala Anritsu Network Analyzer diimplementasikan untuk
melakukan ujian dan pengukuran. Dengan membandingkan prestasi kedua-dua pendipleks,
pendipleks reka bentuk 2 yang terdiri daripada penapis laluan lulus yang dibina daripada empat
penyalun mempunyai lebar jalur yang lebih kecil dan pengasingan antara dua penapis laluan
lulus yang lebih baik. Akibat daripada kekurangan lebar jalur, kehilangan sisipan dan dimensi
litar bertambah.
_______________________________________________________________________________________________________
In this project, an antenna diplexer using quasi-lumped element method implemented on
microstrip transmission line is presented. The antenna diplexer is designed to work in TETRA
technology. The base station receiving frequency for TETRA technology is 0.8060 GHz to
0.8210 GHz while for transmitting is 0.8510 GHz to 0.8660 GHz. The center frequencies of
0.8135 GHz and 0.8585 GHz are taken as the operating frequencies of the antenna diplexer.
Diplexer is composed of two band pass filter, which are termed as Tx (Transmitting) and Rx
(Receiving) filters. The two band pass filters possess a bandwidth of 15 MHz each with fre
quency separation of 45 MHz. Implementation of low Q microstrip transmission line is a
challenge for achieving sufficient isolation between the two filters. Two types of diplexer are
designed and tested; one formed by filters with two resonators and the other formed by filters
comprise of four resonators. Designs and simulations are done by using CST STUDIO SUITE
while Anritsu Network Analyzer is implemented to do the testing and measurement. By com
paring the performance of the two designs, diplexer design 2 which formed by filters comprise
of four resonators possesses narrower bandwidth and better isolation between two filters. As
consequences of achieving narrower bandwidth, the insertion loss and circuit dimension in
crease