Sistem pengukuran garis pusat tiang menggunakan pemprosesan imeg adalah satu sistem pengukuran yang akan menangkap imej dua dimensi tentang tiang yang diukur. Dengan berdasarkan imej yang ditangkap tersebut, garis pusat tiang akan dapat dicari. Teknik yang diguna dalam sistem ini adalah teknik triangulasi. Dengan menggunakan sistem pengukuran ini, ia boleh menyenangkan kerja pengukuran, apabila mengukur tiang- tiang yang susah diukur dengan menggunakan teknik mekanik,seperti ukur dengan menggunakan pita pengukur. Sistem ini terpasang di atas satu bekas plastik dan bekas tersebut ditetapkan dengan pendirian tripod. Sistem ini terdiri daripada sensor ultrasonik and ultrasonik ini digunakan untuk mencari jarak antara pengukuran sistem dan tiang diukur. Jarak antara pengukuran sistem dan tiang yang masih dapat mengukur garis pusat tiang tersebut ialah 4 meter dan garis pusat tiang tersebut tidak melebihi daripada 3.5meter. Tetapi untuk bagi sistem ini untuk berfungsi optimum jarak optimum ia dan garis pusat tiang diukur adalah 1.5meter antara pengukuran sistem dan tiang tersebut, selain itu, tiang diukur tidak melebihi daripada 1.2 meter garis pusat. Pengukuran sistem ini telah direka untuk diguna di atas tanah dan tempat yang bergelap tanpa cahaya. Apabila di tempat bergelap, sistem ini mengandungi empat LED berwarna putih berfungsi sebagai pemberi cahaya untuk pengukuran. Beberapa kajian telah dijalankan untuk mencubakan prestasi terhadap sistem tersebut dengan mengukur beberapa tiang yang mengandungi garis pusat yang berbeza dan purata kesalahan antara garis pusat sebenar dan garis pusat diukur ialah kurang daripada 5%.
______________________________________________________________________________________
The pole diameter measurement system is a measurement system that will capture the two dimension image of the pole and based on the image the pole diameter can be found. The measurement system is developed using the triangulation method. With this system, the pole diameter of the pole which is not easily reachable can easily being determined with the aids of this system. The measurement system is implemented on a square plastic box container and the container is then fixed on the tripod stand. In the system, it consists an ultrasonic sensor to detect the range between the system and the pole position. The range for the pole diameter measurement can go up to 4 meter away from the system and the pole diameter of the pole being measured must less than 3.5 meter. But the optimum of the measurement is measured at the 0.3meter to 1.5meter range and the pole diameter of the pole is less than 1.2 meter. The system is designed used on the land system and it also designed to use in an absence of the light intensity environment with the aided of the 4 white colour LEDs light. Several experiments is carry out with measured a few of different diameters of poles with the measurement system and the results gathered is satisfied due the errors between the actual diameter and the measured diameter by the system is less than 5%.