Konkrit adalah bahan binaan yang sensitif dan kerap mendatangkan masalah kepada
pengguna. Konkrit mampu memberi perkhidmatan dalam tempoh yang panjang dengan
penyenggaraan yang minimum. Walau bagaimanapun, penggunaan konkrit tidak terlepas dari
masalah, seperti cacat dipermukaan, pecah di sudut-sudut, pengkaratan tetulang yang jelas
kelihatan yang akan menyebabkan konkrit pecah dan retak. Untuk mendapatkan konkrit yang
tahanlasak semasa dalam perkhidmatan, perlu difahami faktor yang mempengaruhi
ketahanlasakan konkrit itu sendiri. Salah satu faktor yang mempengaruhi konkrit itu ialah
nisbah air simen. Jika nisbah air simen digunakan lebih daripada had yang sepatutnya maka
kekuatan dan ketumpatan konkrit akan berkurang. Sebaliknya jika nisbah air simen kurang
maka kebolehkerjaannya rendah dan proses penghidratan adalah tidak sempurna. Ujian tanpa
musnah adalah kaedah pengujian ke atas konkrit tanpa meninggalkan kesan kecacatan atau
kerosakan yang ketara pada konkrit. Pengujian ke atas spesimen yang sama dilakukan tanpa
memusnahkannya. Antara kaedah-kaedah pengujian tanpa musnah adalah ujian tukul
menganjal dan ujian denyutan ultrasonik. Ujian denyutan ultrasonik adalah untuk mengawal
kualiti konkrit yang sama, sebarang pemadatan dan perubahan nisbah air simen boleh
dikesan. Ujian tukul menganjal merupakan satu ujian untuk menentukan keseragaman konkrit
dan penganggaran kekuatan konkrit pada sesuatu struktur. Ujian musnah ialah ujian
mampatan kiub konkrit adalah untuk menentukan kekuatan sebenar. Didapati hubungan
antara keputusan ujian tanpa musnah, ujian denyutan ultrasonik memberikan keputusan yang
paling tepat.
_______________________________________________________________________________________________________
Concrete includes complicated materials that bring a lot of complications for the user.
Concrete can provides a long term service with a maintenance minimisation. However, the
usage of concrete could also create problems such as imperfect surface, split in the corner and
stainless that is obviously seen and this can cause concrete spoilt and cracks. There are few
factors to ensure everlasting concretes. The first factor is the water cement ration. If the water
cement ration is higher, it could reduce the strength and density of the concrete. Opposite of,
if the water cement ration is lower the workability and process of hydration will be not be
perfect. The non destructive test without spoiling the concrete is to reduce the imperfection
there are also some test to be done without affecting the concrete. The non destructive test
which are rebound hammer test (ujian tukul menganjal) and ultrasonic pulse velocity test
(ujian denyutan ultrasonik). Ultrasonic pulse velocity test is to control the quality of the same
concrete, any compaction and also to notice the changes of the water cement ration. Rebound
hammer test is determined the unification concrete and assessment strenghtness concrete for
the structure. Destructive test is one compressive concrete cubes determine of original
streghtness. Interaction between the result non destructive tests, the ultrasonic pulse velocity
test result most accurate.