Longgokan atau lebihan kayu bakau yang selalu dibiarkan sebagai sisa di tapak pembinaan boleh diubahsuaikan sebagai satu inovasi dengan menghasilkan karbon teraktif yang bermutu tinggi. Karbon teraktif yang bermutu tinggi mempunyai beberapa ciri – ciri iaitu mempunyai luas permukaan BET yang tinggi, kandungan karbon yang tinggi, kapasiti penjerapan yang tinggi dan kandungan hasil yang tinggi. Karbon teraktif dapat menyingkirkan pewarna seperti metilena biru melalui proses penjerapan. Diantara objektif kajian ini adalah untuk menyediakan karbon teraktif yang paling optimum daripada kayu bakau melalui langkah pengaktifan fizikal iaitu dengan menggunakan gas CO2 serta menyatakan penciriannya. Pembolehubah dimanipulasi ialah suhu pengaktifan dan masa pengaktifan. Karbon teraktif optimum dipilih melalui proses penjerapan dengan mengukur kapasiti penjerapan yang paling maksimum. Kapasiti penjerapan diperolehi melalui pengiraan dua model isoterma iaitu Langmuir dan Freundlich. Karbon teraktif yang mempunyai kapasiti penjerapan paling tinggi diklasifikasi sebagai karbon teraktif optimum. Karbon teraktif optimum yang disediakan pada suhu pengaktifan pada 850oC dengan kadar aliran gas CO2 150cm3/min selama dua jam manghasilkan 95.33% kapasiti karbon. Ia memberikan hasil sebanyak 17.384%, kapasiti penjerapan biru metilena sebanyak 312.5 mg/g dan luas permukaan BET sebanyak 546.4251 m2/g. Data eksperimen penjerapan penjerapan dikenalpasti berpandanan dengan isoterma Langmuir dengan nilai R2 sebanyak 0.9925. Keputusan yang diperolehi menunjukkan bahawa karbon teraktif yang disediakan daripada kayu bakau sesuai digunakan untuk penjerapan metilena biru.
_______________________________________________________________________________________________________
The mangrove pile leftover which is usually considered as waste from construction site can be customize and utilize as innovation to produce high quality activated carbon. High quality activated carbon have several characteristics which are high BET surface volume, high carbon content, high adsorption capacity and high percentage of yield. Activated carbon can act as removal for methylene blue through adsorption process. The main objective of this research was to prepare optimum activated carbon from mangrove timber via physical activation with the utilization of CO2 gas and also characterization of it. The manipulated variables were activation temperature and also activation of time. Optimal activated carbon was choose by undergo the adsorption on methylene blue and the highest adsorption capacity was categorize as optimal. The optimal activated carbon which was prepared at an activation temperature of 850oC with CO2 flowrate of 150 cm3/min for two hours had produce 95.33% capacity of carbon. Then, yield of char was 17.384%. Then, methylene blue adsorption capacity and BET surface area of 312.5mg/g, 546.4251 m2/g. The experimental data of adsorption compatible with Langmuir isotherm with R2 of 0.9925. The results of adsorption study showed that the activated carbon prepared from mangrove timber is suitable for methylene blue removal.