BS EN 10025:1993 Hot rolled products of non-alloy structural steels. Technical delivery conditions
Withdrawn
Printed version of this is available at library. To request, please e-mail to referencepk@usm.my and include a copy of this record in your e-mail.
This European Standard specifies requirements for long products and flat products of hot rolled non-alloy, base and quality steels in the grades and qualities given in tables 2 and 3 (chemical composition) and 5 and 6 (mechanical properties) in the usual delivery condition as given in 7.2.
The steels specified in this European Standard are intended for use in welded, bolted and riveted structures, for service at ambient temperatures (subject to the restrictions described in 7.5.1). They are not intended to be heat treated except products delivered in the delivery condition N. Stress relief annealing is permitted. Products delivered in N condition may be normalized and hot formed after delivery (see clause 3).
NOTE 1. Semi-finished products which are to be converted to rolled finished products conforming to this European Standard should be the subject of special agreement at the time of the enquiry and order. The chemical composition can also be agreed at the time of enquiry and order, however the values should be within the limits of table 2.
NOTE 2. For certain grades and product forms suitability for particular applications may be specified at the time of the enquiry and order (see 7.5.3, 7.5.4 and table 7).
