Projek ini adalah untuk mereka satu dc-dc litar penukar menggunakan topologi Cuk dengan keluaran 5V, 20A. Topologi Cuk pada asasnya adalah satu kombinasi penukar ‘Buck’ dan ‘Boost’. Topologi ini mempunyai kecekapan tinggi, input rendah dan riak arus keluaran yang rendah dan bersaiz kecil. Penukar Cuk menghasilkan voltan keluaran yang rendah dan juga boleh menghasilkan voltan keluaran yang tinggi tetapi kekutuban voltan keluaran adalah bertentangan dengan kekutuban voltan masukan. Analisis telah dilaksanakan menggunakan PSIM 6.0 perisian. Ia menunjukkan penukar Cuk ini itu mampu mencapai 90% kecekapan dengan 0.25 Ω sebagai bebannya. Litar pensuisan pula direka bentuk untuk menjanabentuk gelombang PWM dengan penggunaan kitar tugas dari 0.02 sehingga 0.9.
________________________________________________________________________________________
This project is to design a dc-dc converter circuit using Cuk topology with outputs of 5V, 20A. The Cuk topology is basically a combination of the buck-boost converter. It includes higher efficiency, low input and output current ripple, small size and weight. This topology can be either step down or step up the output voltage but the output voltage polarity is opposite to input voltage. Analysis has been carried out using PSIM 6.0 software. It shows that the simulation of Cuk converter can achieved 90% of efficiency with 0.25 Ω as its load. Switching circuit which is designed is able to produce PWM waveform with duty cycles from 0.02 until 0.9.