Kajian ini telah dijalankan untuk mencirikan akuifer serta menilai potensi air
bawah tanah di formasi batuan sedimen. Kaedah Keberintangan Elektik dan kaedah
penggerudian telah digunakan untuk membangunkan sub-permukaan profil tanah bagi
menentukan lokasi yang sesuai untuk pembinaan telaga tiub. Keputusan kerintangan
menunjukkan hidrogeologi dan taburan ciri-ciri perbezaan antara kawasan kajian.
Objektif utama kajian ini adalah untuk menghubung kait keputusan yang dihasilkan
dengan menggunakan kaedah keberintangan elektrik bersama-sama dengan kaedah
penggerudian bagi menentukan potensi ciri akuifer di kawasan kajian menggunakan hasil
daripada ujian pengepaman. Kaedah keberintangan elektrik telah digunakan untuk
membangunkan lapisan bawah permukaan tanah menggunakan pelbagai jenis
tatasusunan iaitu Pole-Dipole, Wenner dan Schlumberger. Kajian ini telah dijalankan
dengan menggunakan Sistem ABEM Terrameter LS 2 dan keputusannya dianalisis
dengan perisian program penyongsangan kerintangan 2D (RES2DINV). Untuk kajian
kerintangan pelbagai elektrod, kaji selidik ini dijalankan dengan sebaran elektrod
maksimum 400m dan 800m dengan menggunakan dua jalur kajian keberintangan yang
berbeza di zon yang disasarkan. Imej-imej yang telah dibentangkan dalam bentuk profil
dua dimensi (2D) kerintangan memberikan pandangan yang jelas tentang pengagihan
batuan pasir, kelodak dan syal serta potensi zon air bawah tanah. Penilaian potensi zon
air bawah tanah yang dikenal pasti daripada hasil kerintangan telah disahkan dengan
menggunakan ujian pam, ujian penyusutan dan ujian pemulihan. Gabungan antara
ketiga-tiga tatasusunan dan korelasi antara log penggerudian dan ujian pengepaman
boleh dipercayai dan berjaya dalam mengenal pasti zon berpotensi untuk mendapatkan
air bawah tanah di kawasan kajian.
_______________________________________________________________________________________________________
The study was carried out to characterize the aquifer and to evaluate ground water
potential in the sedimentary rock formation. Electrical Resistivity method and drilling
method was used to develop subsurface soil profile for the determination of suitable
location for tube well construction. The resistivity results show hydro-geological and the
distribution of inter distinctions features of the study area. The main objective of this
study is to correlate the results obtain using the electrical resistivity method together with
drilling method to determine the aquifer potential characteristic in the study area using
the pumping test results. The electrical resistivity method was used to infer the subsurface
soil layer using different types of arrays namely Pole-Dipole, Wenner and Schlumberger
array. These surveys were conducted by using ABEM Terrameter LS System and the
results were analysed using 2D resistivity inversion programme (RES2DINV) software.
The survey alignments were conducted with maximum electrode spread of 400 m and
800 m by employing two different resistivity survey lines at the targeted zone. The
images were presented in the form of two-dimensional (2D) resistivity profiles providing
a clear view of the distribution of interbedded sandstone, siltstone and shale as well as
potential groundwater zones. The evaluation of potential groundwater zones identified
from resistivity results were confirmed by using pumping test, step drawdown test and
recovery test. The combination between these three arrays and the correlation between
the well log and pumping test is reliable and successful in identifying potentially
favorable zones for obtaining groundwater in the study area.