Masalah utama system Pengenal Frekuensi Radio atau lebih dikenali sebagai Radio Frequency Identification (RFID) adalah kos pelaksanaan. ZigBee dengan teknologi perkongsian data menyediakan kunci atau penyelesaian kepada masalah ini.Matlamat utama projek ini adalah untuk mengkaji ciri-ciri ZigBee dan teknologi RFID serta meneroka potensi penggabungkan kedua-dua teknologi bersama. Untuk mencapai matlamat ini, kajian yang menyeluruh telah dijalankan untuk memahami dengan lebih lanjut mengenai operasi teknologi ZigBee dan RFID. Projek ini boleh dibahagikan kepada 3 fasa utama. Fasa pertama adalah fasa ZigBee di mana eksperimen yang dijalankan untuk belajar dan mengawal operasi ZigBee. Fasa kedua projek ini adalah proses RFID. Dalam fasa ini, Mantis II telah digunakan untuk belajar dan mengawal operasi RFID. Mantis II merupakan suatu alat pegesan aktif RFID. Fasa ketiga ialah proses integrasi di mana maklumat dan pengetahuan yang diperolehi daripada dua fasa pertama akan digunakan untuk menyatukan kedua-dua peranti ini bersama. Merumuskan secara ringkas, peranti ZigBee digunakan dalam projek ini untuk menghantar dan menerima data dari peranti ZigBee lain yang disambung bersama Komputer Persendirian (PC). Peranti ini kemudiannya akan disambungkan kepada Mantis II aktif oleh pembaca dengan menggunakan penyambung RS232. Komputer akan menghantar isyarat pengaktifan mengunnakan ZigBee kepada Mantis II untuk memulakan proses membaca. Setiap data yang dikumpulakan dipaparkan melalui PC melalui HyperTerminal. Pada akhir projek ini, kesimpulanya adalah bahawa peranti ZigBee dan peranti RFID boleh disepadukan bersama-sama.
_______________________________________________________________________________________________________
Radio Frequency Identification (RFID) main problem is the cost of implementation. ZigBee with its data transferring technology provides the key or solution to the problem. The main goal of this project is to study the characteristics of ZigBee and RFID technology and explore the potential of combining both technologies together. To achieve this aim, extensive studies was conducted to understand and learn more about the operation of ZigBee and RFID technology. This project process flow can be divided into 3 main phases. The first phase is the ZigBee phase where experiments are carried out to learn and control the ZigBee operation. The second phase of the project is the RFID process. In this phase, an active reader named Mantis II was used to learn about the RFID operation. The third phase is the integration process whereby the information and knowledge gathered from the first two phase will be used to integrate the two devices together. To briefly summarize the application, ZigBee device is used in this project to transmit and receive data from another Zigbee device that is connected to a Personal Computer (PC). This device will then be connected to a Mantis II active reader by using an RS232 connector. The PC will remotely send activation signal to enable the reader and starts the reading process. Every data collected will then be displayed through the PC via HyperTerminal. At the end of this project, it is concluded that the ZigBee device and the RFID device can be integrated together.