(For USM Staff/Student Only)

EngLib USM > Ω School of Electrical & Electronic Engineering >

Development of 100W, 24V dc to dc boost converter / Farhana Mohamad Yusop

Development of 100W, 24V dc to dc boost converter_Farhana Mohamad Yusop_E3_2010_875002999_00003079900_NI
Penukar at merupakan litar elektronik yang menukar sumber arus terus dari satu aras ke aras yang lain. Penukar ini boleh menaikkan, menurunkan atau membalikkan keluaran. Tujuan utama dalam menjalankan projek ini adalah untuk merekabentuk penukar at dengan menggunakan topologi Boost dengan keluaran 100 W, 24 V. Ujian dan analisa pada rekebentuk ini dilakukan dengan menggunakan perisian PSIM 4.5 dan ia akan dibandingkan dengan keputusan eksperimen. Voltan keluaran untuk penukar at dengan topologi Boost ditentukan oleh kitar tugas yang mana nisbah masa suis terbuka kepada masa keseluruhan suis berfungsi. Kitar tugas ini dihasilkan oleh pemodulatan lebar denyut. Litar pemodulatan lebar denyut tersebut diaplikasikan untuk mengawal MOSFET bagi menjamin keluaran yang tetap teratur. Berdasarkan keputusan ujikaji, litar pensuisan boleh menghasilkan pemodulatan lebar denyut dengan kitar tugas dari 0.1 hingga 0.8 pada frekuensi tetap iaitu 10 kHz. Hingar yang terhasil daripada IC 555 Timer telah dikurangkan dengan menggunakan pemacu MOSFET TC 4427. __________________________________________________________________________________ Dc converter is an electronic circuit which converts a source of direct current (DC) from one voltage level to another. They can step-up, step-down, and invert. In this project the main objective is to develop 100 W, 24 V Dc converter by using Boost topology. The simulation and analysis of the design is done by using PSIM 4.5 software and compare with the experimental result. The output voltage of the boost dc converter is determined by the duty cycle which is the ratio of the switch on-time to the entire switching cycle time. A duty cycle is generated by a pulse-width modulator (PWM). The PWM control circuit drives the MOSFET to ensure a constantly regulated output. Based on the experiment, the switching circuit can generate a PWM with duty cycle from 0.1 to 0.8 at fixed frequency of 10 kHz. The noise from output of the IC 555 Timer is eliminates by using Driver MOSFET TC4427.
Contributor(s):
Farhana Mohamad Yusop - Author
Primary Item Type:
Final Year Project
Identifiers:
Barcode : 00003079900
Accession Number : 875002999
Language:
English
Subject Keywords:
Boost topology; pulse-width modulator (PWM); boost dc converter
First presented to the public:
4/1/2010
Original Publication Date:
3/19/2018
Previously Published By:
Universiti Sains Malaysia
Place Of Publication:
School of Electrical & Electronic Engineering
Citation:
Extents:
Number of Pages - 74
License Grantor / Date Granted:
  / ( View License )
Date Deposited
2018-03-19 16:17:37.075
Date Last Updated
2019-01-07 11:24:32.9118
Submitter:
Nor Hayati Ismail

All Versions

Thumbnail Name Version Created Date
Development of 100W, 24V dc to dc boost converter / Farhana Mohamad Yusop1 2018-03-19 16:17:37.075