Keperluan untuk mencari sumber baru alternatif bahan binaan yang mampu
digunakan oleh pengguna di negara membangun dan keperluan untuk menggunakan bahan
buangan dalam keadaan yang lebih selamat, telah menarik minat jurutera dan masyarakat
untuk mengkaji kemungkinan penggunaan tempurung kelapa sawit dalam pembinaan.
Kajian yang dijalankan adalah menyelidik tentang kekuatan dan kesesuaian tempurung
kelapa sawit apabila digantikan dengan aggregate kasar. Bahan yang digunakan untuk
menggantikan aggregate kasar adalah tempurung kelapa sawit. Peratusan gantian
tempurung kelapa sawit adalah sebanyak 10%,20% dan 30% dan kekuatan konkrit dengan
gantian tempurung kelapa sawit ini akan dibandingkan dengan konkrit kawalan. Ujian
yang dijalankan adalah seperti ujian kemerosotan, ujian ketumpatan pukal, kekuatan
mampatan, kekuatan lenturan, kekuatan tegangan, ujian pendedahan kepada suhu tinggi
dan ujian denyutan ultrasonik. Sampel konkrit yang digunakan adalah prisma bersaiz
100x100x500 mm and kiub100x100x100 mm. Kesemua spesimen konkrit direndamkan di
dalam air selama 28 hari sebelum ujian dijalankan. Keputusan ujikaji menunjukkan
kekuatan mampatan konkrit 10% gentian tempurung kelapa sawit dipilih untuk digunakan
bagi ujian pendedahan kepada suhu tinggi dan ujian denyutan ultrasonik. Keputusan purata
ujian kekuatan mampatan bagi 28 hari yang diperolehi bagi 10% gantian tempurung
kelapa sawit adalah 33.13 N/mm2 . Peningkatan peratusan 10% gantian tempurung kelapa
sawit bagi 3 hari ke 28 hari adalah 44%. Keputusan ujikaji menunjukkan penggunaan 10%
gentian tempurung kelapa sawit memberikan keputusan yang memuaskan dan
menghampiri keputusan ujian kekuatan mampatan konkrit kawalan. Kesimpulan yang
boleh dibuat ialah 10% gentian tempurung kelapa sawit boleh digunakan sebagai aggregate
kasar dalam penghasilan normal konkrit.
_______________________________________________________________________________________________________
The need of new source for alternative and affordable building materials that can be
afforded by consumers in developing countries and the need to utilize industrial waste in a
more safer way, has attracted the attention of engineers and public to study the possibility
of utilizing oil palm kernel shell (OPKS) as one of the construction materials. This study
investigated the strength and suitability replacement of oil palm kernel shell with coarse
aggregate. The material used to replace coarse aggregate is oil palm kernel shell. Oil palm
kernel shell replacement percentage is 10%, 20% and 30% and the strength of concrete
with oil palm kernel shell replacement will be compared with the concrete control. There
are few tests that are carried out such as slump test, bulk density test, compressive strength,
flexural strength, tensile spliting strength, exposure to elevated temperatures test and
ultrasonic pulse velocity test. The concrete samples used in this study include
100x100x500 mm prism and 100x100x100 mm cube. The concrete specimens were cured
in water for 28 days before testing. The experimental results show the compressive
strength of concrete for 10% of oil palm kernel shell replacement is selected to be used for
burning test and ultrasonic pulse velocity test. The average results of the compressive
strength test for 28 days obtained for 10% replacement of oil palm kernel shell is 33.13
N/mm². The percentage increase of 10% oil palm kernel shell replacement for 3 days to 28
days is 44%. The experimental results show that 10% replacement of oil palm kernel shell
gives satisfactory results and approaching the compressive strength test results of the
control concrete. It can be concluded that 10% replacement of oil palm kernel shell can be
used as coarse aggregate for normal concrete.