BS 2782-3:Method 352E:1996 - Methods of testing plastics. Mechanical properties - Determination of impact resistance by the free-falling dart method (staircase method)
Printed version of this is available at library. To request, please e-mail to referencepk@usm.my and include a copy of this record in your e-mail.
BS 2782-3:Method 352E:1996 is a British Standard that specifies a method for determining the flexural properties of plastics and composites. Specifically, it provides guidelines for measuring the flexural modulus, flexural strength, and other related parameters of these materials.
The method outlined in BS 2782-3:Method 352E:1996 involves subjecting a test specimen to a three-point loading system, where the specimen is supported at two points and a force is applied at the center of the span. The deflection of the specimen under the applied load is measured, and from these measurements, various flexural properties can be calculated.
The standard provides detailed instructions on the test setup, including the dimensions of the test specimen, the loading arrangement, and the required equipment. It also specifies the conditions for conditioning the specimens prior to testing, such as temperature and humidity.
BS 2782-3:Method 352E:1996 is widely used in industries that deal with plastics and composites, such as manufacturing, construction, and automotive sectors. It helps in evaluating the mechanical behavior and performance of these materials under flexural stress, allowing engineers and designers to make informed decisions regarding their applications.
It's worth noting that my knowledge cutoff is in September 2021, so there might have been updates or revisions to the standard since then. I recommend checking the latest version or any amendments that may have been published by the British Standards Institution (BSI) for the most up-to-date information.
