Projek ini adalah untuk merekabentuk pengubah digit-kepada-analog (DAC) yang berkelajuan tinggi untuk sistem tanpa wayar pada masa kini. Elemen sistem tanpa wayar adalah penerima dan penghantar. DAC yang mempunyai resolusi tinggi dan pengubah analog-kepada-digit (ADC) diperlukan dalam sistem tanpa wayar ini untuk memenuhi keperluan nisbah isyarat-kepada-hingar (SNR), kadar dinamik tulen (SFDR), dan spesifikasi herotan. DAC yang terdapat di bahagian penghantar adalah peranti yang mengubah kod digit kepada isyarat analog. Manakala ADC yang terdapat di bahagian penerima adalah peranti yang melaksanakan operasi sebaliknya. Dalam projek ini, pemacu arus DAC telah dipilih memandangkan ianya sesuai untuk aplikasi sistem yang berkelajuan dan resolusi tinggi. 14 bit DAC berkelajuan tinggi dengan kadar 400Msps akan direkabentuk dalam projek ini. Bentangan DAC akan direkabentuk dengan menggunakan perisian OrCAD 9.2 dan kemudian akan difabrikasi di atas papan litar bercetak (PCB). Semua komonen-komponen yang bersaiz kecil akan dipateri di atas papan PCB. Selepas itu, ujian dan pengukuran akan dilakukan bersama-sama ADC untuk memastikan DAC berfungsi dengan baik. Rekabentuk pengubah digit-kepada-analog ini dijangkakan akan mengembangkan aplikasi-aplikasi sistem tanpa wayar pada masa hadapan.
_________________________________________________________________________________________
This project is about to design a high speed digital-to-analog converter (DAC) for wireless system nowadays. A wireless device consists of a receiver and a transmitter. High resolution DAC and analog-to-digital converter (ADC) are required in this wireless communication to meet challenging signal-to-noise ratio (SNR), spurious-free dynamic range (SFDR), and distortion specification. DAC consists in a transmitter part is a device for converting a digital code to an analog signal. Meanwhile ADC consists in receiver part is a device that performs the reverse operation. In this project, current-steering DAC was chose since it is suitable for high-speed high-resolution applications. A 14-bit resolution high speed digital-to-analog converter with 400Msps update rate is designed in this project. The layout of the DAC is designed by using Orcad9.2 software and then fabricated on the Printed Circuit Board (PCB). All the surface mount devices will be soldered onto the PCB. After that, a test and measurement will be done together with ADC to make sure that the DAC is function properly. The design of high speed digital-to-analog converter is expected to improve the application of wireless system for future usage.