(For USM Staff/Student Only)

EngLib USM > Ω School of Electrical & Electronic Engineering >

Rekabentuk penyalun dilektrik 10 ghz yang mempunyai ayunan penimbal / Wan Mohd Afindi Bin Wan Abdullah

Rekabentuk penyalun dilektrik 10 ghz yang mempunyai ayunan penimbal_Wan Mohd Afindi Bin Wan Abdullah_E3_2005_NI
Projek ini adalah untuk merekabentuk satu pengayun dielektrik bersalun beroperasi pada frekuensi 10 GHz. Bagi menghasilkan pengayun ini, satu penyalun dielektrik disambungkan kepada satu penguat untuk menghasilkan satu gelung suap-balik positif. Dalam mereka bentuk litar pengayun ini, satu litar pengayun dibangunkan dan telah diuji untyk mengenalpasti samada litar itu berayun atau tidak. Litar penguat telah direkabentuk dan nilai gandaan ( Gain ) telah disetkan melebihi sifar untuk mengenalpasti litar mengeluarkan hasil yang diinginkan. Kedua -dua litar ini digabungkan bagi penghasilan suatu pengayun. Litar ini diuji sekali lagi bagi memastikan nilai gandaan ( Gain ) yang diperolehi memenuhi spesifikasi yang dikehendaki Dalam mereka bentuk bentangan litar , dua papan litar telah dibina untuk menguji ‘puck’ yang digunakan. Papan litar pertama hanya menggunakan fabrikasi satu dan papan litar kedua menggunakan fabrikasi dua jalur . Papan litar ini disambung dengan ‘Network Analyser’ bagi mentafsirkan tindakbalas frekuensi yang dikeluarkan oleh ‘puck’ itu. _________________________________________________________________________________________ This project is to design a dielectric resonator oscillator at frequency of 10 GHz. To make this oscillator, a dielectric oscillator is connected to an amplifier to create a positive loop feedback. In the design of this oscillator, an oscillator circuit was developed and tested to determine whether the citcuit oscillator or not. The amplifier circuit also has been designed and the gain was set to be greater than zero in order to ensure the circuit will have the desired output. Both of these circuits was be combined to create an oscillator. The circuit was tested again to ensure that the value of Gain from the circuit satisfied the specification and need. In designing the circuit layout, two circuit boards have been developed to test the puck that is being used. The first circuit board is using only one line fabrication and the second circuit board is using two lines fabrication. This circuit board was connected to the network analyzer to measure the frequency response of the puck.
Contributor(s):
Wan Mohd Afindi Wan Abdullah - Author
Primary Item Type:
Final Year Project
Language:
English
Subject Keywords:
dielectric; resonator; oscillator;
First presented to the public:
3/1/2005
Original Publication Date:
8/30/2018
Previously Published By:
Universiti Sains Malaysia
Place Of Publication:
School of Electrical & Electronic Engineering
Citation:
Extents:
Number of Pages - 52
License Grantor / Date Granted:
  / ( View License )
Date Deposited
2018-08-30 11:46:54.058
Date Last Updated
2019-01-07 11:24:32.9118
Submitter:
Nor Hayati Ismail

All Versions

Thumbnail Name Version Created Date
Rekabentuk penyalun dilektrik 10 ghz yang mempunyai ayunan penimbal / Wan Mohd Afindi Bin Wan Abdullah1 2018-08-30 11:46:54.058