Memastikan lif di bangunan menyediakan pengalaman yang menyenangkan memerlukan penyelenggaraan lif, perkhidmatan dan sokongan yang kerap oleh profesional. Pelaksanaan algoritma yang betul dalam sistem kawalan lif adalah penting
untuk memastikan sistem berja lan lancar. Tujuan utama projek ini adalah untuk mencadangkan satu algoritma untuk mengawal pergerakan lif menggunakan Raspberry Pi. Daripada menggunakan pengawal logik boleh diprogram, Raspberry Pi dipilih untuk bertindak sebagai pengawal induk untuk melaksanakan algoritma logik yang mengawal pergerakan lif. Pilihan ini membolehkan pengguna akhir interaksi mesin-manusia lebih mudah, akses log data mudah, dan pelbagai peluang pengembangan masa hadapan. Raspberry Pi GPIO telah digunakan untuk meniru kelakuan butang tekan. Sistem ini
berfungsi dengan menerima isyarat daripada butang input dan kemudian mengawal putaran motor untuk memindahkan kabin ke destinasi yang dikehendaki.
_______________________________________________________________________________________________________
Making sure the elevators in the building provide a pleasant experience requires regular elevator maintenance, service and support by professionals. Implementation of the proper algorithm in the elevator control system are vital to make sure system to run smoothly. The main purpose of this project is to propose an algorithm to control the movement of the elevator using Raspberry Pi. Instead of using programmable logic controller, a Raspberry Pi was chosen to act as the master controller to perform the logic algorithm that control the movement of the elevator. This choice enabled easier end-user human-machine-interface, convenient data log accessibility, and a wide variety of future expansion opportunities. Raspberry Pi GPIO's have been used for emulating push button behaviour. The system works by receiving the signal from the input button and then
control the motor rotation to move the cabin to the desired destination.