Keinginan kepada produk alternatif berasaskan petroleum dalam kehidupan
seharian dan juga keperluan untuk gaya hidup yang lebih mesra alam, mempunyai
kesan yang besar terhadap penyelidikan menghasilkan Polyhydroxyalkanoat (PHA)
secara microb. PHA ialah sekumpulan biopolimer yang boleh disintesis dalam sel-sel
granul aerobik dengan menukar substrat asid lemak boleh meruap (VFA). Dalam
laporan ini, pengumpulan PHA dalam granul aerobik telah dikaji dan dibandingkan
dengan membekalkan tiga jenis sisa buangan kilang minyak sawit (POME) yang
berbeza. Projek ini bertujuan untuk mengetahui antara jenis POME ini yang dapat
mengumpul PHA tertinggi dalam granul aerobik, sekali gus boleh menyumbang
kepada jumlah yang lebih tinggi daripada pengeluaran polimer boleh terurai jika
dilaksanakan di peringkat industri. Eksperimen kumpulan telah dijalankan
menggunakan granul aerobik tersebut dalam tiga set SBR saiz kecil dan masingmasing
dibekalkan dengan POME dirawat secara anaerobik (SBR-1), POME
diperkaya VFA (SBR-2) dan POME mentah (SBR-3). Semua reaktor ini beroperasi
pada 2,730 mg/L OLR, 2 L/min AR dan nisbah pertukaran isipadu 25% menggunakan
kitaran 8 jam. Jumlah tertinggi PHA terkumpul dalam SBR-1, SBR-2 dan SBR-3
masing-masing adalah 0.59, 0.64 dan 0.16 mg PHA/mg CDW, manakala penyingkiran
COD masing-masing adalah 76.3, 74.3 dan 74.1%, di mana penurunan pesat dalam
COD kepekatan boleh diperhatikan dalam tempoh dua hingga empat jam pertama
(tempoh kebuluran) masa kitaran.
_______________________________________________________________________________________________________
The public desire for alternatives to petroleum-based products in daily life and
also the necessity of a more environmentally friendly lifestyle, has had a major impact
towards research of microbially produced Polyhydroxyalkanoate (PHA). PHAs are a
group of biopolymers which can be synthesized in aerobic granules by consuming and
converting volatile fatty acid (VFA) substrates in their cells. In this report, the
accumulation of PHAs in aerobic granules were investigated and compared by feeding
three different types of palm oil mill effluents (POME). This project aims to find out
which of these POMEs able to accumulate highest PHA in aerobic granules, thus may
be contributing to a higher amount of biodegradable polymer production if being
implemented in industrial level. Batch experiments were carried out using the aerobic
granules in three sets of smaller volume SBR fed with anaerobically-treated POME
(SBR-1), VFA-enriched POME (SBR-2) and raw POME (SBR-3) respectively. All
these reactors were operated at 2,730 mg/L OLR, 2 L/min AR and volume exchange
ratio of 25% using 8-hour cycle. The highest amount of PHA accumulated in SBR-1,
SBR-2 and SBR-3 were 0.59, 0.64 and 0.16 mg PHA/mg CDW respectively, while the
respective COD removal was 76.3, 74.3 and 74.1%, where a rapid decrease in COD
concentration can be observed during the first two to four hours (famine phase) of the
cycle time.