Rumah adalah tempat yang paling selesa buat kita. Oleh itu, keselamatan rumah
adalah amat penting supaya kita dapat hidup bebas dan bahagia. Kunci pintu pintar ini
dibina bersama RFID dan IoT untuk memberikan keselesaan, utiliti dan keselamatan.
Projek ini direka untuk pelaksanaan rumah pintar kos rendah supaya semua lapisan
masyarakat dapat memanfaatkannya. Sistem ini juga memudahkan penghuni rumah
untuk mengesan jumlah keluar dan masuk dari rumah tersebut. Antara perkara yang
penting dalam projek ini adalah membina sistem kunci pintu yang mesra pengguna dan
juga modul pengawal utama. Kunci pintu pintar ini memerlukan akses Wi-Fi untuk
berhubung dengan emel penghuni.
Sistem ini menggunakan Arduino Uno sebagai mikropengawal. Tag atau kad RFID akan
dikesan oleh pengimbas RFID dan data akan dihantar ke emel pengguna. Jika kad
tersebut telah didaftar, motor servo akan berputar 90° untuk membuka kunci. Jika tidak,
servo motor akan kekal berada dalam keadaan statik.
_______________________________________________________________________________________________________
Home is the most comfort place for us. Therefore, a home security system is very
crucial for us to live freely and happily. This smart door lock with RFID and IoT
implementation is developed to bring convenience, utility and security altogether.
Nowadays, the wireless communication are more towards low cost and low power
consumption. Therefore, this project is designed for low cost smart home
implementation as it is more affordable to the society. This system made easier for
home occupant to track record of check-in and check-out of the house. There are two
important parts in this project that need to be developed which are user friendly smart
door lock system and main controller module. The smart door lock will require Wi-Fi
access to communicate with the home occupant emails’.
The system will be controlled using the Arduino Uno microcontroller board. RFID tag or
card will be sensed by the RFID reader, then the data is transmitted to the home
occupant emails’. If the RFID tag or card bypass the reader, the reader will grant access
and the servo will turn 90° to unlock the door. However, if the detected tag or card is not
being approved by the reader, it will deny the access and stay initially static.