(For USM Staff/Student Only)

EngLib USM > Ω School of Chemical Engineering >

Adsorption of methylene blue using chitosan membrane embedded with multi-walled carbon nanotubes

Adsorption of methylene blue using chitosan membrane embedded with multi-walled carbon nanotubes / Jahira Alias
Dalam kajian ini, kitosan (CS) dan CS terangkum tiub nano karbon dinding berlapis (CS/MWCNTs) membran dihasilkan dengan mengunakan kaedah penuangan larutan. Membran tersebut digunakan untuk mengkaji penjerapan metilena biru (MB) dari segi masa sentuhan, kepekatan awal MB dan suhu. Kesan masa sentuhan dilakukan dari 60- 240 minit pada suhu 25 ° C dan kepekatan MB 4 mg/L. Untuk mengkaji kesan kepekatan MB, pewarna MB yang berlainan kepekatan dari 1 mg/L hingga 4 mg/L telah dilakukan pada masa dan suhu yang ditetapkan pada 25 °C dan 240 minit. Kesan suhu dikaji dari 25 °C hingga 40°C pada kepekatan MB iaitu 4mg/L selama 240 minit. Ujian penjerapan menunjukkan membran CS/MWCNTs memberikan kapasiti penjerapan dan kecekapan penyingkiran yang lebih tinggi terhadap MB berbanding membran CS tanpa MWCNTs. Kapasiti penjerapan maksima dan kecekapan penyingkiran ialah 0.0160 mg / g dan 93.8% dan 0.0019 mg /g dan 12.5% masing-masing untuk membran CS/MWCNTs dan CS tanpa MWCNTs pada suhu 40°C, masa sentuhan 240 minit dan kepekatan MB 4 mg/L. Keseimbangan isoterma telah dianalisis menggunakan model Langmuir dan Freundlich. Penjerapan untuk MB sesuai dengan model Freundlich. Analisis kinetik dijalankan menggunakan tertib pseudo-pertama dan pseudo-kedua. Keputusan kajian menunjukkan penjerapan MB sesuai dengan perintah pseudo-kedua. _______________________________________________________________________________________________________ In this study, the chitosan (CS) and CS embedded with multi-walled carbon nanotubes (CS/MWCNTs) membrane were synthesized using solution casting method. The resultant membranes were used to study the adsorption of methylene blue (MB) in terms of contact time, initial MB concentration and temperature. The effect of contact time was conducted from 60-240 minutes at temperature of 25°C and MB concentration 4 mg/L. For study of the effect of MB concentration, different dye concentrations ranging from 1 mg/L to 4 mg/L at were conducted while the temperature and the contact time was maintained at 25 °C and 240 minutes, respectively. The effect of temperature was studied from 25°C to 40°C at MB concentration at 4 mg/L and time 240 minutes. Adsorption test showed that the CS/MWCNTs showed higher adsorption capacity and removal efficiency of MB than CS membrane without MWCNTs. The maximum adsorption capacity and removal efficiency were found to be 0.0160 mg/g and 93.8% and 0.0019 mg/g and 12.5% for CS/MWCNTs and CS membrane without MWCNTs, respectively at conditions temperature 40°C, contact time 240 minutes and MB concentration 4 mg/L. The equilibrium isotherm was analysed using Langmuir and Freundlich model. Adsorption for MB follows Freundlich model. Kinetic analysis was conducted using pseudo-first order and second order. The results showed the adsorption of MB fitted well for pseudo-second order.
Contributor(s):
Jahira Alias - Author
Primary Item Type:
Final Year Project
Identifiers:
Accession Number : 875007524
Language:
English
Subject Keywords:
chitosan (CS); CS embedded; (CS/MWCNTs) membrane
First presented to the public:
6/1/2018
Original Publication Date:
7/18/2018
Previously Published By:
Universiti Sains Malaysia
Place Of Publication:
School of Chemical Engineering
Citation:
Extents:
Number of Pages - 54
License Grantor / Date Granted:
  / ( View License )
Date Deposited
2018-07-18 10:32:59.612
Date Last Updated
2019-01-07 11:24:32.9118
Submitter:
Mohd Jasnizam Mohd Salleh

All Versions

Thumbnail Name Version Created Date
Adsorption of methylene blue using chitosan membrane embedded with multi-walled carbon nanotubes1 2018-07-18 10:32:59.612