impelementation of ISO 5659-1 : 1996 - Plastics- smoke generation- Guidance on optical- density testing
Printed version of this is available at library. To request, please e-mail to referencepk@usm.my and include a copy of this record in your e-mail.
The implementation of ISO 5659-1:1996, titled "Plastics - Smoke Generation - Part 1: Guidance on Optical Density Testing," involves following the procedures and guidelines outlined in this international standard for assessing the smoke generation properties of plastics materials. Below are the general steps for implementing ISO 5659-1:1996:
Acquire the Standard: Obtain a copy of ISO 5659-1:1996 from the International Organization for Standardization (ISO) or a recognized standards organization.
Select Appropriate Test Specimen: Identify the specific plastic material or product for which you want to assess smoke generation. Ensure that your test specimen meets the requirements specified in the standard.
Preparation of Specimen: Prepare the test specimen according to the standard's guidelines, which may include specifying the shape, size, and conditioning of the specimen.
Set Up Test Apparatus: Assemble the required test apparatus, including the smoke density chamber and the optical equipment needed for measuring optical density. Ensure that the equipment is calibrated and functioning correctly.
Test Conditions: Follow the standard's instructions for the test conditions, including the temperature, pressure, and other environmental parameters that are relevant to your specific application.
Ignition: Ignite the test specimen in the smoke density chamber according to the procedures specified in the standard.
Measure Optical Density: Use the optical equipment to measure the optical density of the smoke generated during the test. Follow the standard's guidelines for making these measurements.
Record and Report Results: Record the optical density measurements, and report the results in the required format as outlined in the standard.
Data Analysis: Analyze the data obtained from the optical density testing to assess the smoke generation characteristics of the plastic material. This may involve comparing the results with specified limits or standards.
Quality Control: Ensure that the test is conducted with proper quality control measures, including the use of reference materials and adherence to test repeatability and reproducibility standards.
Documentation: Maintain detailed records of the test procedure, including the test conditions, test results, and any deviations from the standard.
Compliance: Verify whether the test results meet the relevant regulatory requirements, industry standards, or specific project specifications.
