(For USM Staff/Student Only)
Browse/Search: EngLib USM
Viewing: 1 - 25 of 13114
| Thumbnail | Name | Publication Date
 | First Public Date | Contributors |
| BS EN 1679-1:1998 Reciprocating internal combustion engines. Safety - Compression ignition engines This standard specifies the safety requirements for compression ignition engines and their essential auxiliaries used in all applications on land, underground and water, except engines used to propel road vehicles and aircraft. The special requirements needed to cover operation in potentially explosive atmospheres are not covered in this standard.
... | 5/28/2024 | 6/15/1998 | NI | |
| BS EN 1678:1998 Food processing machinery. Vegetable cutting machines. Safety and hygiene requirements This European Standard specifies the safety and hygiene requirements for the design and manufacture of vegetable cutting machines which are transportable and have a maximum rated power less than 3 kW.
This European Standard deals with machines intended for cutting, shredding, dicing, chipping and grating of food products in which the product pas... | 5/28/2024 | 8/15/1998 | NI | |
| BS EN 1667:1998 Prevailing torque type all-metal hexagon nuts with flange with metric fine pitch thread Defines the characteristics of prevailing torque type all metal hexagon nuts with flange and metric fine pitch thread with nominal thread diameters d from 8 mm up to and including 20 mm, in product grade A for sizes d up to and including 16 mm and product grade B for sizes d > 16 mm and with property classes 6, 8 and 10. | 5/28/2024 | 4/15/1998 | NI | |
| BS EN 1666:1998 Prevailing torque type hexagon nuts with flange (with non-metallic insert) with metric fine pitch thread Defines the characteristics of prevailing torque type hexagon nuts with flange, with non-metallic annular insert and metric fine pitch thread with nominal thread diameters d from 8 mm up to and including 20 mm, in product grade A for d <= 16 mm and product grade B for d > 16 mm and with property classes 6, 8 and 10.
| 5/28/2024 | 4/15/1998 | NI | |
| BS EN 1664:1998 Prevailing torque type all-metal hexagon nuts with flange Defines the characteristics of prevailing torque type all-metal hexagon nuts with flange and threads from M5 up to M20 inclusive, in product grade A for threads up to and including M16 and product grade B for threads above M16 and with property classes 8, 10 and 12. | 5/28/2024 | 4/15/1998 | NI | |
| BS EN 1663:1998 Prevailing torque type hexagon nuts with flange (with non-metallic insert) Defines the characteristics of prevailing torque type hexagon nuts with flange, with non-metallic annular insert and coarse threads from M5 to M20 inclusive, in product grade A for threads up to and including M16 and product grade B for threads above M16 and with property classes 8 and 10. | 5/28/2024 | 4/15/1998 | NI | |
| BS EN 1662:1998 Hexagon bolts with flange. Small series Defines the characteristics of hexagon flange bolts, small series, with threads from M5 up to and including M16 and with property classes 8.8, 10.9 and A2-70. | 5/28/2024 | 4/15/1998 | NI | |
| BS EN 1661:1998 Hexagon Nuts With Flange (ISO/DIS 4161 : 1996, modified) his European Standard specifies the characteristics of hexagon nuts with flange, with threads from M5 to M20 inclusive, of product grade A for threads up to and including M16 and product grade B for threads above M16 and with property classes 8, 10, 12 and A2-70. | 5/28/2024 | 4/15/1998 | NI | |
| BS 7723-6:1998 Methods for calibration of vertical cylindrical tanks for petroleum and liquid petroleum products - Recommendations for monitoring, checking and verification of tank calibration and capacity table Provides guidelines for monitoring the calibration accuracy and tank capacity table of a vertical cylindrical tank. | 5/28/2024 | 2/15/1998 | NI | |
| BS 7698-12:1998 Reciprocating Internal Combustion Engine Driven Alternating Current Generating Sets. Emergency Power Supply To Safety Devices This part of ISO 8528 applies to generating sets driven by reciprocating internal-combustion (RIC) engines for emergency power supply to safety services.
It applies, for example, to safety equipments in hospitals, high-rise buildings, public gathering places etc. This part of ISO 8528 establishes the special requirements for the performance, des... | 5/28/2024 | 2/15/1998 | NI | |
| BS EN 1654:1998 Copper and copper alloys. Strip for springs and connectors This European Standard specifies the composition, property requirements and tolerances on dimensions and form for copper alloy strip intended for the fabrication of springs and connectors, with thicknesses from 0,1 mm up to and including 1,0 mm and with widths up to and including 350 mm.
The sampling procedures, the methods of test for verificatio... | 3/21/2024 | 4/15/1998 | NI | |
| BS EN 1653:1998 Copper and copper alloys. Plate, sheet and circles for boilers, pressure vessels and hot water storage units This European Standard specifies the composition, property requirements and tolerances on dimensions and form for copper and copper alloy plate, sheet and circles for boilers, pressure vessels, heat exchangers and hot water storage units.
The sampling procedures, the methods of test for verification of conformity to the requirements of this standa... | 3/21/2024 | 4/15/1998 | NI | |
| BS EN 1652:1998 Copper and copper alloys. Plate, sheet, strip and circles for general purposes This British Standard is the English language version of EN 1652:1997. Together with BS EN 1653:1998 and BS EN 1654:1998 it supersedes BS 2870:1980 and BS 2875:1969 which are withdrawn.
The UK participation in its preparation was entrusted by Technical Committee NFE/34, Copper and copper alloys, to Subcommittee NFE/34/1, Wrought and unwrought copp... | 3/21/2024 | 4/15/1998 | NI | |
| BS EN 1650:1998 Chemical disinfectants and antiseptics. Quantitative suspension test for evaluation of fungicidal activity of chemical disinfectants and antiseptics used in food, industrial, domestic and institutional areas. Test method and requirements (phase 2, step 1) his document specifies a test method and the minimum requirements for fungicidal or yeasticidal activity of chemical disinfectant and antiseptic products that form a homogeneous, physically stable preparation when diluted with hard water or - in the case of ready-to-use-products - with water. Products can only be tested at a concentration of 80 % o... | 3/21/2024 | 5/15/1998 | NI | |
| BS EN 1648-2:1998 Leisure accommodation vehicles. 12 V direct current extra low voltage electrical installations - Motor caravans | 1/29/2024 | 3/15/1998 | NI | |
| BS EN 1648-1:1998 Leisure accommodation vehicles. 12 V direct current extra low voltage electrical installations - Caravans | 1/29/2024 | 3/15/1998 | NI | |
| BS EN 1635:1998 Bar coding. Test specifications. Bar code symbols Defines methodology for testing bar code symbols for conformity with symbology specification, specifies a range of quality grades based on measuring specified attributes of the symbol and provides information on possible causes of deviation from optimum grades to enable users to take appropriate corrective action. | 1/29/2024 | 1/15/1998 | NI | |
| BS EN 1622:1998 Water analysis. Determination of the threshold odour number (TON) and threshold flavour number (TFN) | 1/29/2024 | 3/15/1998 | NI | |
| BS EN 1621-1:1998 Motorcyclists' protective clothing against mechanical impact - Requirements and test methods for impact protectors | 1/29/2024 | 4/15/1998 | NI | |
| BS EN 1610:1998 Construction and testing of drains and sewers | 1/29/2024 | 3/15/1998 | NI | |
| BS EN 1598:1998 Health and safety in welding and allied processes. Transparent welding curtains, strips and screens for arc welding processes | 1/29/2024 | 3/15/1998 | NI | |
| BS EN 1592-4:1998 Aluminium and aluminium alloys. HF seam welded tubes - Tolerances on dimensions and form for square, rectangular and shaped tubes Defines tolerances on dimensions and form of square, rectangular and shaped HF seam welded tubes, made from rolled aluminium alloy strip longitudinally welded in a continuous process by passing of an electric current across the abutting edges without the addition of filler metal. Applicable also to tubes made from aluminium alloy strips, which is p... | 1/29/2024 | 3/15/1998 | NI | |
| BS EN 1592-3:1998 Aluminium and aluminium alloys. HF seam welded tubes - Tolerances on dimensions and form for circular tubes Defines tolerances on dimensions and form of circular HF seam welded tubes having a diameter not exceeding 80 mm and wall thickness not exceeding 2.5 mm, which are made from rolled aluminium alloy strip longitudinally welded in a continuous process by passing an electric current across the abutting edges without adding filler metal. | 1/29/2024 | 3/15/1998 | NI | |
| BS EN 1592-2:1998 Aluminium and aluminium alloys. HF seam welded tubes - Mechanical properties Defines the mechanical properties of wrought aluminium alloy HF seam welded tubes for general engineering applications. Does not apply to irrigation and heat exchanger tubes. | 1/29/2024 | 3/15/1998 | NI | |
| BS 7925-1:1998 Software testing - Vocabulary This standard gives terms and definitions to aid communication in software testing and related disciplines. | 1/18/2024 | 8/15/1998 | NI |
Engineering Library USM @ 2017