(For USM Staff/Student Only)
Browse/Search: EngLib USM
Viewing: 1 - 25 of 13018
| Thumbnail | Name | Publication Date
 | First Public Date | Contributors |
| BS EN 1654:1998 Copper and copper alloys. Strip for springs and connectors This European Standard specifies the composition, property requirements and tolerances on dimensions and form for copper alloy strip intended for the fabrication of springs and connectors, with thicknesses from 0,1 mm up to and including 1,0 mm and with widths up to and including 350 mm.
The sampling procedures, the methods of test for verificatio... | 3/21/2024 | 4/15/1998 | NI | |
| BS EN 1653:1998 Copper and copper alloys. Plate, sheet and circles for boilers, pressure vessels and hot water storage units This European Standard specifies the composition, property requirements and tolerances on dimensions and form for copper and copper alloy plate, sheet and circles for boilers, pressure vessels, heat exchangers and hot water storage units.
The sampling procedures, the methods of test for verification of conformity to the requirements of this standa... | 3/21/2024 | 4/15/1998 | NI | |
| BS EN 1652:1998 Copper and copper alloys. Plate, sheet, strip and circles for general purposes This British Standard is the English language version of EN 1652:1997. Together with BS EN 1653:1998 and BS EN 1654:1998 it supersedes BS 2870:1980 and BS 2875:1969 which are withdrawn.
The UK participation in its preparation was entrusted by Technical Committee NFE/34, Copper and copper alloys, to Subcommittee NFE/34/1, Wrought and unwrought copp... | 3/21/2024 | 4/15/1998 | NI | |
| BS EN 1650:1998 Chemical disinfectants and antiseptics. Quantitative suspension test for evaluation of fungicidal activity of chemical disinfectants and antiseptics used in food, industrial, domestic and institutional areas. Test method and requirements (phase 2, step 1) his document specifies a test method and the minimum requirements for fungicidal or yeasticidal activity of chemical disinfectant and antiseptic products that form a homogeneous, physically stable preparation when diluted with hard water or - in the case of ready-to-use-products - with water. Products can only be tested at a concentration of 80 % o... | 3/21/2024 | 5/15/1998 | NI | |
| BS EN 1648-2:1998 Leisure accommodation vehicles. 12 V direct current extra low voltage electrical installations - Motor caravans | 1/29/2024 | 3/15/1998 | NI | |
| BS EN 1648-1:1998 Leisure accommodation vehicles. 12 V direct current extra low voltage electrical installations - Caravans | 1/29/2024 | 3/15/1998 | NI | |
| BS EN 1635:1998 Bar coding. Test specifications. Bar code symbols Defines methodology for testing bar code symbols for conformity with symbology specification, specifies a range of quality grades based on measuring specified attributes of the symbol and provides information on possible causes of deviation from optimum grades to enable users to take appropriate corrective action. | 1/29/2024 | 1/15/1998 | NI | |
| BS EN 1622:1998 Water analysis. Determination of the threshold odour number (TON) and threshold flavour number (TFN) | 1/29/2024 | 3/15/1998 | NI | |
| BS EN 1621-1:1998 Motorcyclists' protective clothing against mechanical impact - Requirements and test methods for impact protectors | 1/29/2024 | 4/15/1998 | NI | |
| BS EN 1610:1998 Construction and testing of drains and sewers | 1/29/2024 | 3/15/1998 | NI | |
| BS EN 1598:1998 Health and safety in welding and allied processes. Transparent welding curtains, strips and screens for arc welding processes | 1/29/2024 | 3/15/1998 | NI | |
| BS EN 1592-4:1998 Aluminium and aluminium alloys. HF seam welded tubes - Tolerances on dimensions and form for square, rectangular and shaped tubes Defines tolerances on dimensions and form of square, rectangular and shaped HF seam welded tubes, made from rolled aluminium alloy strip longitudinally welded in a continuous process by passing of an electric current across the abutting edges without the addition of filler metal. Applicable also to tubes made from aluminium alloy strips, which is p... | 1/29/2024 | 3/15/1998 | NI | |
| BS EN 1592-3:1998 Aluminium and aluminium alloys. HF seam welded tubes - Tolerances on dimensions and form for circular tubes Defines tolerances on dimensions and form of circular HF seam welded tubes having a diameter not exceeding 80 mm and wall thickness not exceeding 2.5 mm, which are made from rolled aluminium alloy strip longitudinally welded in a continuous process by passing an electric current across the abutting edges without adding filler metal. | 1/29/2024 | 3/15/1998 | NI | |
| BS EN 1592-2:1998 Aluminium and aluminium alloys. HF seam welded tubes - Mechanical properties Defines the mechanical properties of wrought aluminium alloy HF seam welded tubes for general engineering applications. Does not apply to irrigation and heat exchanger tubes. | 1/29/2024 | 3/15/1998 | NI | |
| BS 7925-1:1998 Software testing - Vocabulary This standard gives terms and definitions to aid communication in software testing and related disciplines. | 1/18/2024 | 8/15/1998 | NI | |
| BS 7921:1998 Cone top cans of nominal volumes 125 ml to 1000 ml for liquid products. Specification Defines capacities, dimensions and constructional requirements for a range of round cone top cans having integral screw necks, made from tinplate, with nominal filling volumes between 125 ml and 1 litre, for containing liquid products. | 1/18/2024 | 4/15/1998 | NI | |
| BS 7920:1998 Specification for luminance meters Specifies requirements for the measurement of photopic luminance for laboratory and field type instruments. | 1/18/2024 | 8/15/1998 | NI | |
| BS 7916:1998 Code of practice for the selection and application of particleboard, oriented strand board (OSB), cement bonded particleboard and wood fibreboards for specific purposes Gives recommendations for storage, handling, selection and application of boards for use as flooring, sheathing, flat and pitched roofing and built-in fitments and furniture. | 1/18/2024 | 5/15/1998 | NI | |
| BS 7913:1998 Guide to the principles of the conservation of historic buildings Presents information, advice and guidance on the principles of the conserving of historic buildings, applying to buildings, civil engineering and other standing structures either included in the statutory list of buildings of special architectural or historic interest or scheduled ancient monuments. Provides information on the settings of such buil... | 1/18/2024 | 7/15/1998 | NI | |
| BS 7911:1998 Specification for organizations conducting market research Defines requirements for conducting market research, especially specifying minimum service levels for quality assurance executive responsibilities, data collection and data processing for application in market research projects. | 1/18/2024 | 1/15/1998 | NI | |
| BS 7900:1998 Specification for examination of the surface texture of precision steel castings | 1/18/2024 | 5/15/1998 | NI | |
| BS 7825-3.9:1998 Calibration of rubber and plastics test equipment. Calibration schedules - Flammability characteristics Supplies schedules for calibrating a range of equipment and apparatus for investigating the flammability characteristics of plastics and rubber materials. | 1/18/2024 | 2/15/1998 | NI | |
| BS 7825-3.8:1998 Calibration of rubber and plastics test equipment. Calibration schedules - Degradation and environmental properties Determination of environmental stress cracking resistance of plastics by a constant prestrain test. | 1/18/2024 | 6/15/1998 | NI | |
| BS 7825-3.7:1998 Calibration of rubber and plastics test equipment. Calibration schedules - Rheological properties Provides schedules for the calibration of equipment and apparatus used for the measurement of the rheological properties of plastics and rubber materials. | 1/17/2024 | 5/15/1998 | NI | |
| BS 7825-3.4:1998 Calibration of rubber and plastics test equipment. Calibration schedules - Mechanical properties of rubber Provides schedules for the calibration of a range of methods of test for the evaluation of the mechanical properties of rubber. | 1/17/2024 | 6/15/1998 | NI |
Engineering Library USM @ 2017