(For USM Staff/Student Only)
Browse/Search: EngLib USM
Viewing: 13051 - 13075 of 13120
| Thumbnail | Name | Publication Date
 | First Public Date | Contributors |
| BS 7012-4.1:1998 Light microscopes. Specification for microscope objective and nosepiece screw threads - Screw thread type RMS (4/5 in x 1/36 in) | 1/15/2024 | 3/15/1998 | NI | |
| BS 7012-6:1998 Light Microscopes. Specification For Spectral Filters his International Standard specifies recommended diameters to allow the interchangeability of spectral filters used in microscopes, as well as permissible filter material defects and processing faults.
This International Standard differentiates between two forms of spectral filters:
Form A: Filters to be used both in the observation light pat... | 1/15/2024 | 4/15/1998 | NI | |
| BS 7079-B9:1998 Preparation of steel substrates before application of paints and related products. Tests for the assessment of surface cleanliness. Field method for the conductometric determination of water-soluble salts Covers a field procedure for assessing the total surface density of various water-soluble salts (chiefly chlorides and sulfates) on steel surfaces before and/or after surface preparation. Does not determine the individual surface densities of chlorides, sulfates etc. | 1/15/2024 | 1/1/1998 | NI | |
| BS 7121-11:1998 Code of practice for safe use of cranes - Offshore cranes BS 7121-11 is the 11th part of the BS 7121 multi-series that discusses the code of practice for the safe use of cranes.
BS 7121-11 gives recommendations for the safe use of offshore cranes (including supporting structures affixed to offshore installations), primarily operating in an open sea environment.
Note: The following activities are n... | 1/15/2024 | 8/15/1998 | NI | |
| BS 7164-32.1:1998 Chemical tests for raw and vulcanized rubber. Methods for determination of accelerators. - Gas and thin layer chromatography Defines procedures using gas chromatography (GC) and thin layer chromatography (TLC) for separating and identifying the following classes of accelerators in vulcanized and unvulcanized compounds: thiazoles sulfenamides thiurams and dithiocarbamates guanidines dithiodimorpholine | 1/15/2024 | 10/15/1998 | NI | |
| BS 7211:1998 Electric cables. Thermosetting insulated, non-armoured cables for voltages up to and including 450/750 V, for electric power, lighting and internal wiring, and having low emission of smoke and corrosive gases when affected by fire Requirements for non-armoured cables with thermosetting insulation of rated voltage up to and including 450/750 V, which produce lower levels of smoke and corrosive gases under exposure to fire, compared with corresponding PVC-insulated cables specified in BS 6004. | 1/15/2024 | 10/15/1998 | NI | |
| BS EN 1:1998 Flued oil stoves with vaporizing burners Pertains to flued oil stoves with one or more vaporizing burners (hereafter referred to as 'stoves') as used for individual heating in the domestic field. | 1/16/2024 | 9/15/1998 | NI | |
| BS EN 484:1998 Specification for dedicated liquefied petroleum gas appliances. Independent hotplates, including those incorporating a grill for outdoor use Defines constructional and performance characteristics, safety definitions and rational use of energy, relevant test methods and marking of independent hotplates, including those fitted with a grill, burning liquefied petroleum gas, known as appliances. | 1/16/2024 | 1/15/1998 | NI | |
| BS EN 497:1998 Specification for dedicated liquefied petroleum gas appliances. Multi-purpose boiling burners for outdoor use Defines constructional and performance characteristics, safety specifications and rational use of energy, relevant test methods and marking of boiling burners burning liquefied petroleum gas and designed to heat vessels containing liquid or food, or a heating plate. | 1/16/2024 | 2/15/1998 | NI | |
| BS EN 498:1998 Specification for dedicated liquefied petroleum gas appliances. Barbecues for outdoor use This standard specifies the constructional and performance characteristics, safety specifications, relevant test methods and marking of barbecues burning liquefied petroleum gas, referred to in the body of the text as "appliances". This standard covers barbecues as defined in 3.6, used outdoors and operating with the gases indicated in 4.1 accordi... | 1/16/2024 | 2/15/1998 | NI | |
| BS EN 521:1998 Specification for dedicated liquefied petroleum gas appliances. Portable vapour pressure liquefied petroleum gas appliances This standard specifies the construction and performance characteristics related to safety and the rational use of energy of portable appliances burning liquefied petroleum gases at the vapour pressure within the gas container. It also defines test methods and the requirements for marking and the information to be given in the instructions.
| 1/16/2024 | 6/15/1998 | NI | |
| BS EN 522:1998 Adhesives for leather and footwear materials. Bond strength. Minimum requirements and adhesive classification Defines a procedure for evaluating solvent based and dispersion adhesives intended for use for sole attachment. Defines minimum requirements for some strength properties of bonds made with these adhesives and defines an adhesive classification based on the results obtained with reference test materials representing types of leather, rubber or plast... | 1/16/2024 | 7/15/1998 | NI | |
| BS EN 525:1998 Non-domestic direct gas-fired forced convection air heaters for space heating not exceeding a net heat input of 300 kW This European Standard specifies the requirements and test methods for the safety of non-domestic direct gas-fired forced convection air heaters having fully automatic control systems, hereafter referred to as "appliances". This European Standard applies to appliances of Type A2 and Type A3 with heat input based on the net calorific value of 300 kW... | 1/16/2024 | 4/15/1998 | NI | |
| BS EN 539-2:1998 Clay roofing tiles for discontinuous laying. Determination of physical characteristics - Test for frost resistance This part of this European Standard specifies four test methods for the determination of frost resistance of clay roofing tiles and fittings to apply according to the geographic zone of use of the product under the conditions described in prEN1304. | 1/16/2024 | 9/15/1998 | NI | |
| BS EN 675:1998 Glass in building. Determination of thermal transmittance (U value). Heat flow meter method | 1/16/2024 | 6/15/1998 | NI | |
| BS EN 710-1998 Safety requirements for casting, molding and core-making machinery, apparatus and related equipment Defines safety requirements to be met by the manufacturer for machines and plant used in foundries for the production of castings in disposable models. | 1/16/2024 | 1/1/1998 | NI | |
| BS EN 737-1:1998 Medical gas pipeline systems Terminal units for compressed medical gases and vacuum Defines requirements for terminal units for use in medical gas pipeline systems defined in prEN 737-3 to be used with oxygen, nitrous oxide, air for breathing, carbon dioxide, oxygen/nitrous oxide mixture [50%/50% (V/V)], air for driving surgical tools, nitrogen for driving surgical tools and vacuum. It is intended to ensure the gas specific assemb... | 1/16/2024 | 6/15/1998 | NI | |
| BS EN 737-2:1998 Medical gas pipeline systems Anaesthetic gas scavenging disposal systems. Basic requirements Defines basic requirements for anaesthetic gas scavenging (AGS) disposal systems. Intends to ensure the safe operation of anaesthetic gas scavenging systems (AGSS). Comprises three main parts, the disposal system, receiving system and the transfer system. Test procedures and specifications are given to ensure compatibility between the systems compo... | 1/16/2024 | 9/15/1998 | NI | |
| BS EN 737-4:1998 Medical gas pipeline systems - Terminal units for anaesthetic gas scavenging systems Defines requirements and dimensions for terminal units to be used in anaesthetic gas scavenging systems defined in PREN 737-2 for scavenging of medical gases and anaesthetic vapours. | 1/16/2024 | 5/15/1998 | NI | |
| BS EN 739:1998 Low-pressure hose assemblies for use with medical gases Defines requirements for low-pressure hose assemblies for use with oxygen, nitrous oxide, air for breathing, helium, carbon dioxide, xenon, specified mixtures of the gases listed previously, air for driving surgical tools, nitrogen for driving surgical tools and vacuum. Intended to ensure gas-specificity and for prevention of cross-connection betwe... | 1/16/2024 | 6/15/1998 | NI | |
| BS EN 752-4:1998 Drain and sewer systems outside buildings - Hydraulic design and environmental considerations This standard includes national practice for drainage, taken from BS 8005 and BS 8301 which have been declared obsolescent. | 1/16/2024 | 6/15/1998 | NI | |
| BS EN 752-5:1998 Drain and sewer systems outside buildings - Rehabilitation Applies to drain and sewer systems operating essentially under gravity, from the point where the sewage leaves a building or roof drainage system or enters a road gully to its being discharged into a treatment works or receiving water. Includes drains and sewers below buildings, if they are not part of the drainage system of the building. Defines p... | 1/16/2024 | 3/15/1998 | NI | |
| BS EN 752-6:1998 Drain and sewer systems outside buildings - Pumping installations Establishes the principles of wastewater pumping for gravity drain and sewer systems from entry as wastewater to discharge for treatment. | 1/16/2024 | 9/15/1998 | NI | |
| BS EN 752-7:1998 Drain and sewer systems outside buildings - Maintenance and operations Establishes the principles of maintenance and operation of wastewater drainage. | 1/16/2024 | 9/15/1998 | NI | |
| BS EN 778:1998 Domestic gas-fired forced convection air heaters for space heating not exceeding a net heat input of 70 kW, without a fan to assist transportation of combustion air and/or combustion products This standard specifies the requirements and test methods for the safety and efficiency of domestic gas-fired air heaters with (an) atmospheric burner(s) and without a fan to assist the transportation of combustion air and/or flue gases, hereafter referred to as "appliances". This standard applies to Type B11, B11AS, B11BS, C11, C21, C31 and C41 ap... | 1/16/2024 | 7/15/1998 | NI |
Engineering Library USM @ 2017