Thumbnail | Name | Publication Date | First Public Date | Contributors |
BS EN 288-3 :1992- Specification and approval of welding procedures for metallic materials - Part 3: Welding procedure tests for the arc welding of steels This standard specifies how a welding procedure specification is approved by welding procedure tests. It defines the conditions for the execution of welding procedure approval tests and the limits of validity of an approved welding procedure for all practical welding operations within the range of variables listed in clause 8. Tests shall be car... | 5/1/1992 | MFAR | ||
BS EN 300:1997- Oriented Strand Boards (OSB) - definitions, classification and specifications This European Standard gives definitions, a classification and specifies the requirements for Oriented Strand Boards (OSB). The values listed in this standard relate to product properties but they are not characteristic values to be used in design calculations. Note: Test methods for the determination of mechanical properties for structural purpose... | 9/15/1997 | MFAR | ||
BS EN 305:1997- Heat exchangers. Definitions of performance of heat exchangers and the general test procedure for establishing performance of all heat exchange This European Standard specifies general terms and calculations used in deter- mining performance of heat exchangers including related theory and general test procedure. This European Standard applies to heat exchangers classified according to the general arrangement of heat transfer specified by heat transfersurface types of 4.1 and 4.2 of prEN 24... | 7/15/1997 | MFAR | ||
BS EN 306:1997- Heat exchangers. Methods of measuring the parameters necessary for establishing the performance This European Standard specifies the methods and accuracy of measurement for temperature, pressure, fluid quality and massflow of different fluids and how to determine the pressure drops across a heat exchanger. Measurements are restricted to those necessary for establishing the performance of heat exchangers classified in prEN 247 using the fluids... | 10/15/1997 | MFAR | ||
BS EN 312-1:1997- Particleboards. Specifications. Part 1. General requirements for all board types Describes requirements for some properties common for all types of uncoated particleboards as in EN 312 Pts 2-7. | 4/15/1997 | MFAR | ||
BS EN 312-2:1997- Particleboards. Specifications. Part 2: Requirements for general purpose boards for use in dry conditions This European Standard specifies the requirements for general purpose boards foruse in dry contitions. Additional information on supplementary properties for certain applications is also given. Particleboards in accordance with this standard may be referred to as P2-boards. This standard does not give requirements for Oriented Strand Boards (OSB); ... | 4/15/1997 | MFAR | ||
BS EN 312-3:1997- Particleboards. Specifications. Part 3. Requirements for boards for interior fitments (including furniture) for use in dry conditions Gives requirements for interior fitments (including furniture for dry conditions. Does not include oriented strand boards (OSB) or extruded particleboards. | 4/15/1997 | MFAR | ||
BS EN 312-4:1997- Particleboards - Specifications - Part 4. Requirements for load-bearing boards for use in dry conditions This European standard specifies the requirements for load-bearing boards for use in dry conditions. NOTE: These boards are intended for use in design and construction of load-bearing or stiffening building elements, e.g. walls, flooring, roofing, and I-beams (see EN V 1995-1-1 and/or performance standards). | 4/15/1997 | MFAR | ||
BS EN 312-5:1997- Particleboards. Specifications - Part 5. Requirements for load-bearing boards for use in humid conditions Specifies the requirements for load-bearing particleboards for use in humid conditions. These boards are intended for use in the design and construction of load-bearing or stiffening building elements; e.g. walls, flooring, roofing and I-beams. The values listed in this standard relate to product properties, but they are not characteristic values t... | 9/15/1997 | MFAR | ||
BS EN 312-6:1997- Particleboards - Specifications - Part 6. Requirements for heavy duty load-bearing boards for use in dry conditions This European Standard specifies the requirements for heavy duty load-bearing boards for use in dry conditions. NOTE: These boards have enhanced properties with those specified in EN 312-4. They may also be used in design and construction of load-bearing or stiffening building elements, e.g. walls, flooring, roofing and I-beams (see EN V 1995-1-1 a... | 4/15/1997 | MFAR | ||
BS EN 312-7:1997- Particleboards - Specifications - Part 7. Requirements for heavy duty load-bearing boards for use in humid conditions This European Standard specifies the requirements for heavy duty load-bearing boards for use in humid conditions. Note: These boards are intended for use in design and construction of load-bearing or stiffening building elements, e.g. walls, flooring, roofing and I-beams (see ENV 1995-1-1 and/or performance standards). The values listed in this sta... | 9/15/1997 | MFAR | ||
BS EN 344-2 1997- Safety, protective and occupational footwear for professional use Part 2. Additional requirements and test methods States requirements and methods of testing regarding properties of footwear for professional use as in EN 344:1992. Relates to water resistance, protection from cutting by hand held chain saws fire fighting hazards, metatarsal protection and cut resistance. For use only with EN 345-2, EN 346-2, or EN 347-2. Covers water resistance, protection again... | 1/15/1997 | MFAR | ||
BS EN 345-2 : 1997- Safety Footwear for Professional Use Part 2: Additional Specifications Gives additional requirements for safety footwear regarding water resistance, protection against cutting by hand held chain saws, fire fighting resistance (for fire fighters) metatarsal protection and cut resistance. | 1/15/1997 | MFAR | ||
BS EN 346-2 : 1997- Protective footwear for professional use Part 2. Additional specifications This European Standard specifies by reference to EN 344 : 1992 and EN 344-2 additonal requirements for protective footwear, relating to water resistances, metatarsal protection and cut resistance. | 1/15/1997 | MFAR | ||
BS EN 347-2:1997- Occupational footwear for professional use - Part 2. Additional specifications This European Standard specifies by reference to EN 344 1992 and EN 344-2 additional requirement for occupational footwear, relating to water resistance. | 1/15/1997 | MFAR | ||
BS EN 352-3:1997- Hearing protectors. Safety requirements and testing - Part 3. Ear-muffs attached to an industrial safety helmet This document specifies requirements for construction, design, performance, marking and user information for earmuffs attached to head protection and/or face protection devices, hereinafter referred to as 'mounted earmuffs. | 6/15/1997 | MFAR | ||
BS EN 381-8:1997- Protective clothing for users of hand-held chain saws. Part 8. Test methods for chain saw protective gaiters This European Standard specifies the test methods to be used to assess the resistance of gaiters to cutting by hand-held chain saws. A test method of assessing the strength of underfoot straps of gaiters is also included. This European Standard is applicable to gaiters used together with safety footwear according to EN 345:1992 and EN 345:1992/A1 ... | 9/15/1997 | MFAR | ||
BS EN 381-9:1997- Protective clothing for users of hand-held chain saws. Part 9. Requirements for chain saw protective gaiters This European Standard specifies requirements to be used to assess the resistance of gaiters to cutting by hand-held chain saws and other properties. A requirement for the strength of underfoot straps of gaiters is also included. This European Standard is applicable to gaiters used together with safety footwear according to EN 345:1992 and EN 345:... | 9/15/1997 | MFAR | ||
BS EN 441-12:1997- Refrigerated display cabinets. Part 12. Measurement of the heat extraction rate of the cabinets when the condensing unit is remote from the cabinet This European Standard specifies terminology general mechanical and physical requirements, test condition as well installations, maintenance and user guide for refgerated display cabinets for the sale and /or display of food products. | 10/15/1997 | MFAR | ||
BS EN 442-2:1997- Radiators and convectors. Part 2. Test methods and rating Printed version of this is available at library. To request, please e-mail to referencepk@usm.my and include a copy of this record in your e-mail. | 1/15/1997 | MFAR | ||
BS EN 442-3:1997- Radiators and convectors. Part 3. Evaluation of conformity Printed version of this is available at library. To request, please e-mail to referencepk@usm.my and include a copy of this record in your e-mail. | 9/15/1997 | MFAR | ||
BS EN 443:1997- Helmets for firefighters Printed version of this is available at library. To request, please e-mail to referencepk@usm.my and include a copy of this record in your e-mail. | 12/15/1997 | MFAR | ||
BS EN 445:1997- Grout for prestressing tendons- Test methods Printed version of this is available at library. To request, please e-mail to referencepk@usm.my and include a copy of this record in your e-mail. | 11/15/1997 | MFAR | ||
BS EN 446:1997- Grout for prestressing tendons - Grouting procedures Printed version of this is available at library. To request, please e-mail to referencepk@usm.my and include a copy of this record in your e-mail. | 11/15/1997 | MFAR | ||
BS EN 447:1997- Grout for prestressing tendons- Specification for common grout Printed version of this is available at library. To request, please e-mail to referencepk@usm.my and include a copy of this record in your e-mail. | 11/15/1997 | MFAR |