Thumbnail | Name | Publication Date | First Public Date | Contributors |
BS EN 1463-1:1998 Road marking materials. Retroreflecting road studs - Initial performance requirements This European Standard specifies the initial performance requirements and laboratory test methods for retroreflecting road studs intended for use as permanent and temporary road marking materials.
| 10/26/2023 | 1/15/1998 | NI | |
BS EN 145:1998 Respiratory protective devices. Self-contained closed-circuit breathing apparatus compressed oxygen or compressed oxygen-nitrogen type. Requirements, testing, marking This European Standard specifies minimum requirements for self-contained closed-circuit breathing apparatus, compressed oxygen (O2) and compressed oxygen-nitrogen (O2 - N2) types, used as respiratory protective devices, except escape apparatus and diving apparatus. Laboratory and practical performance tests are included for the assessment of compl... | 1/10/2024 | 1/15/1998 | NI | |
BS EN 1436:1998 Road marking materials. Road marking performance for road users IS EN 1436 - Road Marking performance for road-users replaces BS 3262. IS EN 1436 is an end
performance specification concentrating on the needs of the driver. The standard specifies the various
levels of performance that are approved for use in a contract specification, which will govern the required
quality of the road marking. It also describ... | 10/26/2023 | 1/15/1998 | NI | |
BS EN 1424:1998 Road marking materials. Premix glass beads This European Standard specifies the requirements for laboratory tests (production control) and qualification procedures for the premixed glass beads used in road marking materials.
The requirements taken into consideration in this standard are:
— granulometry;
— refractive index of the glass;
— chemical resistance;
— quality;
— surface treat... | 10/26/2023 | 1/15/1998 | NI | |
BS EN 1423:1998 Road marking materials. Drop on materials. Glass beads, antiskid aggregates and mixtures of the two BS EN 1423:1998 specifies the requirements for laboratory tests (production control) and qualification procedures for the following drop on materials used in road markings. These materials are dropped on to paints, thermoplastics, cold plastics and any other marking product applied in a liquid state, immediately after application to the road surfac... | 10/26/2023 | 1/15/1998 | NI | |
BS EN 1399:1998 Resilient Floor Coverings. Determination Of Resistance To Stubbed And Burning Cigarettes he document specifies methods for determining the stubbed cigarette resistance and burning cigarette resistance of resilient floor coverings. | 10/23/2023 | 1/15/1998 | NI | |
BS EN 1398 1998 - Dock Levellers Printed version of this is available at library. To request, please e-mail to referencepk@usm.my and include a copy of this record in your e-mail.
| 8/23/2023 | 1/15/1998 | NI | |
BS EN 1264-3:1998 Floor heating. Systems and components - Dimensioning Printed version of this is available at library. To request, please e-mail to referencepk@usm.my and include a copy of this record in your e-mail. | 5/19/2023 | 1/15/1998 | NI | |
BS EN 1264-2:1998 Floor heating. Systems and components - Determination of the thermal output Printed version of this is available at library. To request, please e-mail to referencepk@usm.my and include a copy of this record in your e-mail. | 5/19/2023 | 1/15/1998 | NI | |
BS EN 1264-1:1998 Floor heating. Systems and components - Definitions and symbols Printed version of this is available at library. To request, please e-mail to referencepk@usm.my and include a copy of this record in your e-mail. | 5/19/2023 | 1/15/1998 | NI | |
BS EN 1177:1998 Impact absorbing playground surfacing. Safety requirements and test methods This European Standard specifies requirements for surfacing to be used in children's playgrounds and specific requirements for areas where impact attenuation is necessary. It suggests the factors to be considered when selecting playground surfacing and gives a method of test by which the impact attenuation can be determined. This test gives a criti... | 10/16/2023 | 1/15/1998 | NI | |
BS EN 1067:1998 Adhesives - Examination and preparation of samples for testing Printed version of this is available at library. To request, please e-mail to referencepk@usm.my and include a copy of this record in your e-mail. | 8/10/2023 | 1/15/1998 | NI | |
BS EN 1066:1998 Adhesives. Sampling This International Standard specifies methods for sampling adhesives and related products, in order to obtain uniform samples of convenient size which are adequately representative of the product being sampled. The sample or
samples so obtained are suitable for examination and preparation prior to testing.
The methods are applicable to products w... | 2/24/2023 | 1/15/1998 | NI | |
BS DD242 : 1998 - Code of practice for intruder alarm systems for high security areas Specifies criteria for definition and inspection of intruder alarms in high security premises which do not need to conform fully to BS 7042:1988. | 5/22/2023 | 1/15/1998 | NI | |
BS 8218:1998 Code of practice for mastic asphalt roofing Gives recommendations for the use of mastic asphalt in roofing for both flat and sloping roofs and covers a variety of applications, including trafficked roofs such as roof top car parks. | 6/10/2024 | 1/15/1998 | NI | |
BS 7911:1998 Specification for organizations conducting market research Defines requirements for conducting market research, especially specifying minimum service levels for quality assurance executive responsibilities, data collection and data processing for application in market research projects. | 1/18/2024 | 1/15/1998 | NI | |
BS EN 1391:1998 - Adhesives for leather and footwear materials. A method for evaluating the bondability of materials. Minimum requirements and material classification Printed version of this is available at library. To request, please e-mail to referencepk@usm.my and include a copy of this record in your e-mail.
| 8/23/2023 | 1/12/1998 | NI | |
BS EN 1127-1:2007 Explosive atmospheres - Explosion prevention and protection. Basic concepts and methodology Printed version of this is available at library. To request, please e-mail to referencepk@usm.my and include a copy of this record in your e-mail. | 8/10/2023 | 1/8/1998 | NI | |
MS ISO 14050: 2001 Environmental management-vocabulary (ISO 14050: 1998, IDT) Printed version of this standard is available at Library. To request, please e-mail to adminpk@usm.my and include a copy of this record in your e-mail. | 11/16/2020 | 1/5/1998 | ||
MS ISO 8985: 2000 Plastics-Ethylene/vinyl acetate copolymer (EVAC) thermoplastics-Determination of vinyl acetate content (ISO 8595: 1998, IDT) Printed version of this standard is available at Library. To request, please e-mail to adminpk@usm.my and include a copy of this record in your e-mail. | 11/11/2020 | 1/3/1998 | ||
Pengajaran berbantukan komputer tutorial pemprosesan isyarat digit (dsp) menggunakan java / Yong Suan Hueh Tujuan utama prqjek tahun akhir ini ialah untuk membangunkan suatu program penuh
interaksi pengguna yang ditulis dalam Java dan diletakkan dalam 'eeserver' bagi
kegunaan pelajar USMKCP khususnya dan pelajar bukan USM amnya melalui
jaringan Internet. Program ini merupakan tutorial mengenai Pemprosesan Isyarat
Digit (DSP) dan mengandungi beberapa... | 11/14/2017 | 1/1/1998 | Yong, Suan Hueh | |
EN 1330-8:1998 - Non-destructive testing - Terminology - Part 8: Terms used in leak tightness testing This European Standard defines the terms used in leak testing. | 5/22/2023 | 1/1/1998 | NI | |
EN 1095:1998 - Deck safety harness and safety line for use on recreational craft - Safety requirements and test methods Printed version of this is available at library. To request, please e-mail to referencepk@usm.my and include a copy of this record in your e-mail. | 8/9/2023 | 1/1/1998 | ||
BS EN 953 : 1998 - Safety of machinery - guards - general requirements for the design and construction of fixed and movable guards Specifies general requirements for the design and construction of guards provided primarily to protect persons from mechanical hazards. Applies primarily to machines which are manufactured after the date of issue of this standard. Attention is drawn to the use of guards to minimise exposure to non-mechanical hazards. The requirements are applicable... | 2/24/2023 | 1/1/1998 | NI | |
BS EN 710-1998 Safety requirements for casting, molding and core-making machinery, apparatus and related equipment Defines safety requirements to be met by the manufacturer for machines and plant used in foundries for the production of castings in disposable models. | 1/16/2024 | 1/1/1998 | NI |