(For USM Staff/Student Only)
Browse/Search: EngLib USM
Viewing: 51 - 75 of 6008
| Thumbnail | Name | Publication Date
 | First Public Date | Contributors |
| BS EN 1762:1998 Rubber hoses and hose assemblies for liquefied petroleum gas, LPG (liquid or gaseous phase), and natural gas up to 25 bar (2,5 MPa). Specification | 7/11/2024 | 7/15/1998 | NI | |
| BS EN 1760-1:1998 Safety Of Machinery. Pressure Sensitive Protective Devices. General Principles For The Design And Testing Of Pressure Sensitive Mats And Pressure Sensitive Floors BS EN 1760-1 specifies requirements for pressure sensitive mats and floors normally actuated by the feet for use as safety devices to protect persons from dangerous machinery. The minimum safety requirements for the performance, marking and documentation are given. | 7/11/2024 | 2/15/1998 | NI | |
| BS EN 1758:1998 Copper and copper alloys. Strip for lead frames Defines the composition, property requirements and tolerances on dimensions and form for copper and copper alloy strip for lead frame material, not exceeding widths of 100 mm. Thicknesses between 0.1 mm and 1.0 mm are mainly used for stamped lead frames for integrated circuits and low power devices, and thicknesses between 1.0 mm and 2.0 mm are mai... | 7/11/2024 | 5/15/1998 | NI | |
| BS EN 1748-2:1998 Glass in building - Glass ceramics Specifies and classifies glass ceramics to be used in building. Indicates chemical composition, main physical and mechanical properties, dimensional and minimum quality requirements (respective of optical and visual faults). | 7/11/2024 | 1/15/1998 | NI | |
| BS EN 1748-1:1998 Glass in building - Borosilicate glasses Specifies and classifies borosilicate glasses to be used in building, indicating their chemical composition, main physical and mechanical properties, dimensional and minimum quality requirements (in respect of optical and visual faults). Applicable only to borosilicate glasses in stock sizes, and not to borosilicate glasses supplied in cut sizes fo... | 7/11/2024 | 1/15/1998 | NI | |
| BS EN 1744-1:1998 Tests for chemical properties of aggregates - Chemical analysis Specifies reference procedures and, in certain cases an alternative method, for the chemical analysis of aggregates. | 7/11/2024 | 8/15/1998 | NI | |
| BS EN 1741:1998 Determination of shear strength for out-of-plane forces of joints between prefabricated components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure Describes a method of testing jointed specimens using vertical loading on top surface of a horizontally positioned component. | 7/11/2024 | 9/15/1998 | NI | |
| BS EN 1739:1998 Determination of shear strength for in-plane forces of joints between prefabricated components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure Describes a method of testing jointed specimens by applying an in-line load parallel with or at an angle to the joint.
| 7/11/2024 | 9/15/1998 | NI | |
| BS EN 1738:1998 Determination of steel stresses in unloaded reinforced components made of autoclaved aerated concrete Describes a method of testing by strain gauge readings on bars when embedded in the component and when free from external stresses. | 7/10/2024 | 9/15/1998 | NI | |
| BS EN 1733:1998 Suction catheters for use in the respiratory tract | 7/10/2024 | 6/15/1998 | NI | |
| BS EN 1731:1998 Mesh type eye and face protectors for industrial and non-industrial use against mechanical hazards and/or heat Specifies materials, design, perfomance requirements, test methods and marking requirements excluding eye protectors for protection against molten metal splash, hot solid risks or electrical hazard. | 7/10/2024 | 2/15/1998 | nu | |
| BS EN 1727:1998 Domestic furniture. Storage furniture. Safety requirements and test methods Does not cover durability requirements which are the subject of BS 4875:Part 7. | 7/10/2024 | 8/15/1998 | NI | |
| BS EN 1725:1998 Domestic furniture. Beds and mattresses. Safety requirements and test methods Not applicable to foldaway beds, bunk beds, children\'s cots, adjustable beds for disabled persons, waterbeds and air beds | 7/10/2024 | 6/15/1998 | NI | |
| BS EN 1715-4:1998 Aluminium and aluminium alloys. Drawing stock - Specific requirements for welding applications Applicable to drawing stock of aluminium alloys for welding and defines characteristics and specified technical conditions for inspecting and delivery of these products. Not applicable to drawn wire. | 7/10/2024 | 1/15/1998 | NI | |
| BS EN 1715-2:1998 Aluminium and aluminium alloys. Drawing stock - Specific requirements for electrical applications Defines requirements for drawing stock of aluminium and aluminium alloys for electrical applications. | 7/10/2024 | 1/15/1998 | NI | |
| BS EN 1715-1:1998 Aluminium and aluminium alloys. Drawing stock - General requirements and technical conditions for inspection and delivery | 7/10/2024 | 1/15/1998 | NI | |
| BS EN 1714:1998 Non destructive testing of welded joints. Ultrasonic testing of welded joints Specifies methods for the manual ultrasonic testing of fusion welded joints in metallic materials equal to and above 8 mm thick which exhibit low ultrasonic attenuation. | 7/10/2024 | 1/15/1998 | NI | |
| BS EN 1713:1998 Non-destructive testing of welds. Ultrasonic testing. Characterization of indications in welds This standard defines a flowchart procedure, see annex A, which is devoted to the classification of internal indications as planar or non-planar. This standard is only suitable for indications located at least 5 mm below the unground surface of the joint. [The scope of the complete standard includes a diagram] | 7/10/2024 | 9/15/1998 | NI | |
| BS 336:1989 - Specification for fire hose couplings and ancillary equipment Printed version of this is available at library. To request, please e-mail to referencepk@usm.my and include a copy of this record in your e-mail. | 6/25/2024 | 6/25/2024 | NAAR | |
| BS ISO 13752:1998 Current Air quality. Assessment of uncertainty of a measurement method under field conditions using a second method as reference Defines a procedure for assessment of the measurement uncertainty of a calibrated measurement procedure (test method) applied under field conditions by means of a second method as a reference (reference method), which may not necessarily be a legally prescribed procedure. | 6/10/2024 | 6/15/1998 | NI | |
| BS 9450:1998 Specification For Integrated Electronic Circuits And Micro-Assemblies Of Assessed Quality (Capability Approval Procedures). Generic Data And Methods Of Test Defines the approval procedure for integrated circuits, as defined in 1.1.3, specifically designed, ordered, produced, tested and supplied to customer procurement requirements declared within manufacturer's capability approval. Also, test methods, symbols, definitions and other material already published in BS 9400, offers supplementary information... | 6/10/2024 | 3/15/1998 | NI | |
| BS 8218:1998 Code of practice for mastic asphalt roofing Gives recommendations for the use of mastic asphalt in roofing for both flat and sloping roofs and covers a variety of applications, including trafficked roofs such as roof top car parks. | 6/10/2024 | 1/15/1998 | NI | |
| BS 7932:1998 Method for determination of polished paver value (PPV) Covers a laboratory procedure for determination of the polished paver value (PPV) of paving units by means of a flat-bed polishing machine in conjunction with pendulum test equipment. | 6/10/2024 | 9/15/1998 | NI | |
| BS 7926:1998 Quantitative Micrographic Methods To Determine The Percentage Content Of Non-Metallic Inclusions In Cast Steel Defines two micrographic procedures for determination of the non-metallic inclusion content of cast steels. Defines numerical values of the area fraction of non-metallic inclusions present in samples of cast steels. | 6/10/2024 | 8/15/1998 | NI | |
| BS 7925-2:1998 Software Testing. Software Component Testing This standard defines the process for software component testing using specified test case design and measurement techniques. This will enable users of the standard to directly improve the quality of their software testing, and improve the quality of their software products. | 6/10/2024 | 8/15/1998 | NI |
Engineering Library USM @ 2017