(For USM Staff/Student Only)
Browse/Search: EngLib USM
Viewing: 576 - 600 of 5821
| Thumbnail | Name | Publication Date | First Public Date
 | Contributors |
| BS EN 54-2 : 1998 Fire detection and fire alarm systems - Part 2: Control and indicating equipment
This standard specifies requirements, methods of test, and performance criteria for control and indicating equipment (see item B of figure 1 of EN 54-1) for usein fire detection and fire alarm systems installed in buildings.
| 1/10/2024 | 3/15/1998 | NI | |
| BS EN 752-5:1998 Drain and sewer systems outside buildings - Rehabilitation Applies to drain and sewer systems operating essentially under gravity, from the point where the sewage leaves a building or roof drainage system or enters a road gully to its being discharged into a treatment works or receiving water. Includes drains and sewers below buildings, if they are not part of the drainage system of the building. Defines p... | 1/16/2024 | 3/15/1998 | NI | |
| BS EN 993-10:1998 Methods of test for dense shaped refractory products - Determination of permanent change in dimensions on heating ALSO NUMBERED AS BS 1902-5.10: 1998 Defines three procedures for determining the permanent change in dimensions on heating of dense shaped refractory products. | 2/24/2023 | 3/15/1998 | NI | |
| BS 1016-104.3:1998 Methods for analysis and testing of coal and coke - Determination of volatile matter content Printed version of this standard is available at library, To request, please e-mail to reference@usm.my and include of this record in your e-mail. | 4/5/2022 | 4/15/1998 | ||
| BS 6499:1998 - Metal screw necks, screw caps and inner seals for metal containers. Specification Printed version of this is available at library. To request, please e-mail to referencepk@usm.my and include a copy of this record in your e-mail. | 2/13/2023 | 4/15/1998 | NI | |
| BS 6708:1998 - Flexible cables for use at mines and quarries Printed version of this is available at library. To request, please e-mail to referencepk@usm.my and include a copy of this record in your e-mail. | 2/13/2023 | 4/15/1998 | NI | |
| BS 6782-10(1998) : 1998 - Binders for Paints - Part 10: Determination of Monomeric Diisocyanates in Polyisocyanate Resins Printed version of this is available at library. To request, please e-mail to referencepk@usm.my and include a copy of this record in your e-mail. | 2/13/2023 | 4/15/1998 | NI | |
| BS 6891:1998 -Specification for installation of low pressure gas pipework of up to 28 mm (R1) in domestic premises (2nd family gas) | 1/30/2023 | 4/15/1998 | NI | |
| BS 7012-11:1998 Light microscopes - Information provided to the user Defines the minimum required information provided to the user by the microscope manufacturer. Recommends further data additional to the mandatory microscope information. | 1/15/2024 | 4/15/1998 | NI | |
| BS 7012-6:1998 Light Microscopes. Specification For Spectral Filters his International Standard specifies recommended diameters to allow the interchangeability of spectral filters used in microscopes, as well as permissible filter material defects and processing faults.
This International Standard differentiates between two forms of spectral filters:
Form A: Filters to be used both in the observation light pat... | 1/15/2024 | 4/15/1998 | NI | |
| BS 7921:1998 Cone top cans of nominal volumes 125 ml to 1000 ml for liquid products. Specification Defines capacities, dimensions and constructional requirements for a range of round cone top cans having integral screw necks, made from tinplate, with nominal filling volumes between 125 ml and 1 litre, for containing liquid products. | 1/18/2024 | 4/15/1998 | NI | |
| BS EN 1013-1:1998 - Light transmitting profiled plastic sheeting for single skin roofing - General requirements and test methods Printed version of this is available at library. To request, please e-mail to referencepk@usm.my and include a copy of this record in your e-mail. | 2/20/2023 | 4/15/1998 | NI | |
| BS EN 1013-3:1998 Light transmitting profiled plastic sheeting for single skin roofing - Specific requirements and test methods for sheets of polyvinyl chloride (PVC) Printed version of this is available at library. To request, please e-mail to referencepk@usm.my and include a copy of this record in your e-mail. | 2/20/2023 | 4/15/1998 | NI | |
| BS EN 1217:1998 Materials and articles in contact with foodstuffs. Test methods for water absorption of ceramic articles Printed version of this is available at library. To request, please e-mail to referencepk@usm.my and include a copy of this record in your e-mail.
| 2/27/2023 | 4/15/1998 | NI | |
| BS EN 1418:1998 Welding personnel. Approval testing of welding operators for fusion welding and resistance weld setters for fully mechanized and automatic welding of metallic materials This European Standard specifies requirements for the approval of welding operators for fusion welding and resistance weld setters for fully mechanized and automatic welding processes of metallic materials. Only welding operators/resistance weld setters, responsible for setting up and/or adjustment during welding have to be approved. Personnel excl... | 10/23/2023 | 4/15/1998 | NI | |
| BS EN 1422:1998 Sterilizers for medical purposes.Ethylene oxide sterilizers. Requirements and test methods This European standard specifies the minimum performance requirements and test methods of two types of sterilizers employing ethylene oxide gas as the sterilant, either as a pure gas or in admixture with other gases (whether supplied ready mixed or mixed at the point of use) in a temporarily sealed chamber.
These sterilizers are intended to be use... | 10/23/2023 | 4/15/1998 | NI | |
| BS EN 1505:1998 Ventilation for buildings. Sheet metal air ducts and fittings with rectangular cross-section. Dimensions Defines dimensions of sheet metal air ducts and duct fittings, having rectangular cross-section. Applicable to ductwork used in ventilation and air conditioning systems in buildings for human occupancy. | 6/4/2024 | 4/15/1998 | NI | |
| BS EN 1506:1998 Ventilation for buildings. Sheet metal air ducts and fittings with circular cross section. Dimensions | 6/4/2024 | 4/15/1998 | NI | |
| BS EN 1621-1:1998 Motorcyclists' protective clothing against mechanical impact - Requirements and test methods for impact protectors | 1/29/2024 | 4/15/1998 | NI | |
| BS EN 1652:1998 Copper and copper alloys. Plate, sheet, strip and circles for general purposes This British Standard is the English language version of EN 1652:1997. Together with BS EN 1653:1998 and BS EN 1654:1998 it supersedes BS 2870:1980 and BS 2875:1969 which are withdrawn.
The UK participation in its preparation was entrusted by Technical Committee NFE/34, Copper and copper alloys, to Subcommittee NFE/34/1, Wrought and unwrought copp... | 3/21/2024 | 4/15/1998 | NI | |
| BS EN 1653:1998 Copper and copper alloys. Plate, sheet and circles for boilers, pressure vessels and hot water storage units This European Standard specifies the composition, property requirements and tolerances on dimensions and form for copper and copper alloy plate, sheet and circles for boilers, pressure vessels, heat exchangers and hot water storage units.
The sampling procedures, the methods of test for verification of conformity to the requirements of this standa... | 3/21/2024 | 4/15/1998 | NI | |
| BS EN 1654:1998 Copper and copper alloys. Strip for springs and connectors This European Standard specifies the composition, property requirements and tolerances on dimensions and form for copper alloy strip intended for the fabrication of springs and connectors, with thicknesses from 0,1 mm up to and including 1,0 mm and with widths up to and including 350 mm.
The sampling procedures, the methods of test for verificatio... | 3/21/2024 | 4/15/1998 | NI | |
| BS EN 1661:1998 Hexagon Nuts With Flange (ISO/DIS 4161 : 1996, modified) his European Standard specifies the characteristics of hexagon nuts with flange, with threads from M5 to M20 inclusive, of product grade A for threads up to and including M16 and product grade B for threads above M16 and with property classes 8, 10, 12 and A2-70. | 5/28/2024 | 4/15/1998 | NI | |
| BS EN 1662:1998 Hexagon bolts with flange. Small series Defines the characteristics of hexagon flange bolts, small series, with threads from M5 up to and including M16 and with property classes 8.8, 10.9 and A2-70. | 5/28/2024 | 4/15/1998 | NI | |
| BS EN 1663:1998 Prevailing torque type hexagon nuts with flange (with non-metallic insert) Defines the characteristics of prevailing torque type hexagon nuts with flange, with non-metallic annular insert and coarse threads from M5 to M20 inclusive, in product grade A for threads up to and including M16 and product grade B for threads above M16 and with property classes 8 and 10. | 5/28/2024 | 4/15/1998 | NI |
Engineering Library USM @ 2017