(For USM Staff/Student Only)
Browse/Search: EngLib USM
Viewing: 13001 - 13025 of 13115
| Thumbnail | Name | Publication Date
 | First Public Date | Contributors |
| BS EN 1423:1998 Road marking materials. Drop on materials. Glass beads, antiskid aggregates and mixtures of the two BS EN 1423:1998 specifies the requirements for laboratory tests (production control) and qualification procedures for the following drop on materials used in road markings. These materials are dropped on to paints, thermoplastics, cold plastics and any other marking product applied in a liquid state, immediately after application to the road surfac... | 10/26/2023 | 1/15/1998 | NI | |
| BS EN 1424:1998 Road marking materials. Premix glass beads This European Standard specifies the requirements for laboratory tests (production control) and qualification procedures for the premixed glass beads used in road marking materials.
The requirements taken into consideration in this standard are:
— granulometry;
— refractive index of the glass;
— chemical resistance;
— quality;
— surface treat... | 10/26/2023 | 1/15/1998 | NI | |
| BS EN 1436:1998 Road marking materials. Road marking performance for road users IS EN 1436 - Road Marking performance for road-users replaces BS 3262. IS EN 1436 is an end
performance specification concentrating on the needs of the driver. The standard specifies the various
levels of performance that are approved for use in a contract specification, which will govern the required
quality of the road marking. It also describ... | 10/26/2023 | 1/15/1998 | NI | |
| BS EN 1441:1998 Medical devices. Risk analysis Defines a method for investigation by the manufacturer of the safety of a medical device, including in vitro diagnostic devices or accessories, by identification of hazards and estimation of the risks associated with the device. Particularly helpful in areas where relevant standards are unavailable or unused. Does not define levels of acceptability... | 10/26/2023 | 3/15/1998 | NI | |
| BS EN 1442:1998 Transportable refillable welded steel cylinders for liquefied petroleum gas (LPG). Design and construction This European Standard specifies minimum requirements concerning material, design, construction and workmanship, procedure and test at manufacture of transportable refillable welded steel Liquefied Petroleum Gas (LPG) cylinders of water capacity from 0,5 l up to and including 150 l exposed to ambient temperatures. | 10/26/2023 | 6/15/1998 | NI | |
| BS EN 1463-1:1998 Road marking materials. Retroreflecting road studs - Initial performance requirements This European Standard specifies the initial performance requirements and laboratory test methods for retroreflecting road studs intended for use as permanent and temporary road marking materials.
| 10/26/2023 | 1/15/1998 | NI | |
| BS EN 1466:1998 Child care articles. Carry cots and stands. Safety requirements and test methods This European Standard specifies safety requirements and test methods for carry cots and other similar products which are intended for the purpose of carrying a child by hand and which may be used in conjunction with an appropriate stand; safety requirements and test methods are also specified for such stands. These products are fitted with two han... | 10/26/2023 | 6/15/1998 | NI | |
| BS EN 134:1998 Respiratory protective devices. Nomenclature of components What is BS EN 134 - Respiratory protective devices about?
BS EN 134 is a European Standard that specifies a harmonized nomenclature for typical components of respiratory protective devices. BS EN 134 does not specify which or how many components are used and where they are located in the apparatus. The illustrations used are given as examples on... | 1/10/2024 | 5/15/1998 | NI | |
| BS EN 136:1998 Respiratory protective devices. Full face masks. Requirements, testing, marking This European Standard specifies minimum requirements for full face masks for respiratory protective devices. Full face masks for diving apparatus are not included in the scope of this European Standard. Laboratory and practical performance tests are included for the assessment of compliance with the requirements. | 1/10/2024 | 6/15/1998 | NI | |
| BS EN 145:1998 Respiratory protective devices. Self-contained closed-circuit breathing apparatus compressed oxygen or compressed oxygen-nitrogen type. Requirements, testing, marking This European Standard specifies minimum requirements for self-contained closed-circuit breathing apparatus, compressed oxygen (O2) and compressed oxygen-nitrogen (O2 - N2) types, used as respiratory protective devices, except escape apparatus and diving apparatus. Laboratory and practical performance tests are included for the assessment of compl... | 1/10/2024 | 1/15/1998 | NI | |
| BS EN 179:1998 Building hardware. Emergency exit devices operated by a lever handle or push pad. Requirements and test methods Specifies requirements for the manufacture, performance and testing of emergency devices mechanically operated by either a lever handle or a push pad, for use where a panic situation is unlikely to arise. Emergency devices covered are for use on hinged or pivoted door leaves only, not exceeding 200kg in mass, 2500mm in height and 1300mm in width. | 1/10/2024 | 1/15/1998 | NI | |
| BS EN 26:1998 Gas fired instantaneous water heaters for the production of domestic hot water, fitted with atmospheric burners Defines the specifications and test methods concerning the construction, safety, rational use of energy and fitness for purpose, and also the classification and marking of gas-fired instantaneous water heaters for the production of domestic hot water. | 1/10/2024 | 9/15/1998 | NI | |
| BS EN 30-2-1:1998 Domestic cooking appliances burning gas - Rational use of energy. General This Standard sets out the requirements and the test method for the rational use of energy of gas burning domestic cooking appliances, in accordance with clause 1 of EN 30-1-1:1998. This standard covers type testing only. NOTE : The calorific values specified in this standard are based on the upper calorific value (Hs) as defined in EN 30-1-1:199... | 1/10/2024 | 9/15/1998 | NI | |
| BS EN 329:1997 Sanitary tapware. Waste fittings for shower trays. General technical specifications Covers the materials, dimensions, performance, and marking for waste systems including outlets, traps and overflows to be used for kitchen sinks, shower trays, wash basins, bidets and baths that can be connected to gravity drainage systems. | 1/10/2024 | 2/15/1997 | NI | |
| BS EN 331:1998+A1:2010 Manually operated ball valves and closed bottom taper plug valves for gas installations for buildings This European Standard specifies the general requirements for the construction, performance and safety of ball valves and closed bottom taper plug valves. It also details the test methods and marking requirements.
It applies to metallic valves for domestic and commercial not directly buried installations inside or outside of buildings, using gases... | 1/10/2024 | 6/15/1998 | NI | |
| BS EN 415-4:1998 Safety of packaging machines - Palletizers and depalletizers Defines safety requirements for designing, manufacturing and information for safe use of palletizers, depalletizers, and stackers/unstackers of empty pallets integrated or not into a (de)palletizer. Applicable to automatic and semi-automatic (de)palletizers, taking into account hazards possible during setting, commissioning and decommissioning adju... | 1/10/2024 | 1/15/1998 | NI | |
| BS EN 474-10:1998 Earth-moving machinery. Safety - Requirements for trenchers Specifies additional requirements to and/or exceptions from EN 474-1. Also gives additional requirements for attachments and for derivated machinery. | 1/10/2024 | 9/15/1998 | NI | |
| BS EN 474-11:1998 Earth-moving machinery. Safety - Requirements for earth and landfill compactors Specifies additional requirements to and/or exceptions from EN 474-1. Also gives additional requirements for attachments and for derivated machinery. | 1/10/2024 | 7/15/1998 | NI | |
| BS EN 474-7:1998 Earth-moving machinery. Safety - Requirements for scrapers Specifies additional requirements to and/or exceptions from EN 474-1. Also gives additional requirements for derivated machinery. | 1/10/2024 | 7/15/1998 | NI | |
| BS EN 474-8:1998 Earth-moving machinery. Safety - Requirements for graders Specifies additional requirements to and/or exceptions from EN 474-1. Also gives additional requirements for derivated machinery. | 1/10/2024 | 9/15/1998 | NI | |
| BS EN 474-9:1998 Earth-moving machinery. Safety - Requirements for pipelayers Specifies additional requirements to and/or exceptions from EN 474-1. Also gives additional requirements for rear mounted winch. | 1/10/2024 | 7/15/1998 | NI | |
| BS EN 476:1998 General requirements for components used in discharge pipes, drains and sewers for gravity systems | 1/10/2024 | 1/15/1998 | NI | |
| BS EN 480-1:1998 Admixtures for concrete, mortar and grout. Test methods - Reference concrete and reference mortar for testing Specifies the constituent materials, the composition and the mixing method to produce reference concrete and reference mortar for testing the efficacy and the compatibility of admixtures in accordance with prEN 934-2. | 1/10/2024 | 3/15/1998 | ni | |
| BS EN 480-12:1998 Admixtures for concrete, mortar and grout. Test methods - Determination of the alkali content of admixtures This European Draft Standard specifies a method for the determination of the alkali (sodium and potassium) content of admixtures for concrete, mortar and grouts in accordance with the series EN 934. | 1/10/2024 | 3/15/1998 | ni | |
| BS EN 54-2 : 1998 Fire detection and fire alarm systems - Part 2: Control and indicating equipment
This standard specifies requirements, methods of test, and performance criteria for control and indicating equipment (see item B of figure 1 of EN 54-1) for usein fire detection and fire alarm systems installed in buildings.
| 1/10/2024 | 3/15/1998 | NI |
Engineering Library USM @ 2017