(For USM Staff/Student Only)
Browsing/Searching: EngLib USM > @i* Standard > British Standard
Viewing: 5251 - 5275 of 5390
| Thumbnail | Name | Publication Date | First Public Date
 | Contributors |
| BS EN 61146-2:1997 IEC 61146-2 : 1997- Video cameras (PAL/SECAM/NTSC). Method of measurement. Part 2. Two- and three-sensor professional cameras Applies to the assessment of performance of professional colour video cameras equipped with two and three tubes or solid state imagers, user for educational or industrial purposes and in other applications. Defines test patterns, measurement conditions and methods of measurement. | 12/15/1997 | MFAR - Author | ||
| BS EN 61146-1:1997 HEC 1146-1 :1994- Video cameras (PAL/SECAM/NTSC). Method of measurement - Non-broadcast single-sensor cameras This standard BS EN 61146-1:1997 Video cameras (PAL/SECAM/NTSC). Method of measurement is classified in these ICS categories:33.160.40 Video systems. Defines test patterns, measurement conditions and methods of measurement to provide the basis of assessment of performance for non-broadcast colour video cameras with a single-tube or solid state imag... | 3/15/1997 | MFAR - Author | ||
| BS EN 61114-2:1997- Methods of measurement on receiving antennas for satellite broadcast transmissions in the 12 GHz band. Part 2.Mechanical and environmental tests on individual and collective receiving antennas Applicable to receiving antennas for satellite broadcasting transmissions in the 11/12 HGz band. Specifies the conditions and measurement methods to be used. Does not include performance requirements. | 7/15/1997 | MFAR - Author | ||
| BS EN 441-12:1997- Refrigerated display cabinets. Part 12. Measurement of the heat extraction rate of the cabinets when the condensing unit is remote from the cabinet This European Standard specifies terminology general mechanical and physical requirements, test condition as well installations, maintenance and user guide for refgerated display cabinets for the sale and /or display of food products. | 10/15/1997 | MFAR - Author | ||
| BS EN 381-9:1997- Protective clothing for users of hand-held chain saws. Part 9. Requirements for chain saw protective gaiters This European Standard specifies requirements to be used to assess the resistance of gaiters to cutting by hand-held chain saws and other properties. A requirement for the strength of underfoot straps of gaiters is also included. This European Standard is applicable to gaiters used together with safety footwear according to EN 345:1992 and EN 345:... | 9/15/1997 | MFAR - Author | ||
| BS EN 1586:1996- EDI. Message. Instruction message (IFTMIN) Printed version of this is available at library. To request, please e-mail to referencepk@usm.my and include a copy of this record in your e-mail. | 4/15/1996 | NAAR - Data Entry Person | ||
| BS EN 381-8:1997- Protective clothing for users of hand-held chain saws. Part 8. Test methods for chain saw protective gaiters This European Standard specifies the test methods to be used to assess the resistance of gaiters to cutting by hand-held chain saws. A test method of assessing the strength of underfoot straps of gaiters is also included. This European Standard is applicable to gaiters used together with safety footwear according to EN 345:1992 and EN 345:1992/A1 ... | 9/15/1997 | MFAR - Author | ||
| BS EN ISO 377:1997- Steel and steel products. Location and preparation of samples and test pieces for mechanical testing This International Standard specifies requirements for the identification, location and preparation of samples and test pieces intended for mechanical tests on steel sections, bars, rod, flat products and tubular products as defined in ISO 6929. If agreed in the order this standard may also apply to other metallic products. It does not apply to non... | 9/15/1997 | MFAR - Author | ||
| BS 3884-2: 1990 ISO 8526-1: 1990 : Modular units for machine tools — Part 2: Specification for workholding pallets up to 800 mm nominal size 9 Printed version of this standard is available at Library. To request, please e-mail to referencepk@usm.my and include a copy of this record in your e-mail. | 11/30/1990 | MJMS - Data Entry Person | ||
| BS EN 312-5:1997- Particleboards. Specifications - Part 5. Requirements for load-bearing boards for use in humid conditions Specifies the requirements for load-bearing particleboards for use in humid conditions. These boards are intended for use in the design and construction of load-bearing or stiffening building elements; e.g. walls, flooring, roofing and I-beams. The values listed in this standard relate to product properties, but they are not characteristic values t... | 9/15/1997 | MFAR - Author | ||
| BS EN 300:1997- Oriented Strand Boards (OSB) - definitions, classification and specifications This European Standard gives definitions, a classification and specifies the requirements for Oriented Strand Boards (OSB). The values listed in this standard relate to product properties but they are not characteristic values to be used in design calculations. Note: Test methods for the determination of mechanical properties for structural purpose... | 9/15/1997 | MFAR - Author | ||
| BS 4573:1970+A5:2016- Specification for 2-pin reversible plugs and shaver socket-outlets Defines requirements for reversible 2-pin plugs and shaver socket-outlets with ratings not greater than 250 V and 200 mA. a.c. | 3/19/1970 | MFAR - Author | ||
| BS EN 288-3 :1992- Specification and approval of welding procedures for metallic materials - Part 3: Welding procedure tests for the arc welding of steels This standard specifies how a welding procedure specification is approved by welding procedure tests. It defines the conditions for the execution of welding procedure approval tests and the limits of validity of an approved welding procedure for all practical welding operations within the range of variables listed in clause 8. Tests shall be car... | 5/1/1992 | MFAR - Author | ||
| BS 5669-Part 2 : 1989- Particleboard Part 2: Specification for Wood Chipboard This part of BS 5569 specifies requirements for six types of wood chipboard from 6 mm to 50 mm thickness, classified according to property levels rather than by the types of adhesive or wood species used. Manufacturing requirements covering permitted tolerances on the sizes of boards together with mean quality levels and marking requirements are sp... | 8/31/1989 | MFAR - Author | ||
| BS 3734-1:1997 ISO 3302-1 : 1996- Rubber. Tolerances for products Part 1: Dimensional tolerances Specifies classes of dimensional tolerances and their values, for moulded, extruded, and calendered solid rubber products. The relevant test methods are also specified. | 1/15/1997 | MFAR - Author | ||
| BS 3600:1997- Specification for dimensions and masses per unit length of welded and seamless steel pipes and tubes for pressure purposes This British Standard specifies the dimensions and masses per unit length applicable to welded and seamless carbon and low alloy tubes conforming to the requirements of BS 3601, BS 3602: Parts 1 and 2 and BS 3604. The dimensional limitations for particular manufacturing processes are given in the appropriate standard in the BS 3601 to BS 3604 serie... | 1/15/1997 | MFAR - Author | ||
| BS ISO/IEC ISP 11186-4:1997- Information technology - international standardized profiles fvt3nn - virtual terminal basic class - register of attribute assignment type definitions - Part 4: FVT322 - font assignment type no. 2 General the concept of Profiles for OS, and the structure of the International Standardized Profiles that document them, are defined in ISO/IEC TR 10000-1. Such Profiles are divided into a number of different classes and sub-classes. Two of these classes contain sub-classes comprising functions of the Virtual Terminal Basic Class Service and Protoc... | 12/15/1997 | MFAR - Author | ||
| BS EN 312-3:1997- Particleboards. Specifications. Part 3. Requirements for boards for interior fitments (including furniture) for use in dry conditions Gives requirements for interior fitments (including furniture for dry conditions. Does not include oriented strand boards (OSB) or extruded particleboards. | 4/15/1997 | MFAR - Author | ||
| BS EN 312-4:1997- Particleboards - Specifications - Part 4. Requirements for load-bearing boards for use in dry conditions This European standard specifies the requirements for load-bearing boards for use in dry conditions. NOTE: These boards are intended for use in design and construction of load-bearing or stiffening building elements, e.g. walls, flooring, roofing, and I-beams (see EN V 1995-1-1 and/or performance standards). | 4/15/1997 | MFAR - Author | ||
| BS EN 312-6:1997- Particleboards - Specifications - Part 6. Requirements for heavy duty load-bearing boards for use in dry conditions This European Standard specifies the requirements for heavy duty load-bearing boards for use in dry conditions. NOTE: These boards have enhanced properties with those specified in EN 312-4. They may also be used in design and construction of load-bearing or stiffening building elements, e.g. walls, flooring, roofing and I-beams (see EN V 1995-1-1 a... | 4/15/1997 | MFAR - Author | ||
| BS EN 312-7:1997- Particleboards - Specifications - Part 7. Requirements for heavy duty load-bearing boards for use in humid conditions This European Standard specifies the requirements for heavy duty load-bearing boards for use in humid conditions. Note: These boards are intended for use in design and construction of load-bearing or stiffening building elements, e.g. walls, flooring, roofing and I-beams (see ENV 1995-1-1 and/or performance standards). The values listed in this sta... | 9/15/1997 | MFAR - Author | ||
| BS EN 344-2 1997- Safety, protective and occupational footwear for professional use Part 2. Additional requirements and test methods States requirements and methods of testing regarding properties of footwear for professional use as in EN 344:1992. Relates to water resistance, protection from cutting by hand held chain saws fire fighting hazards, metatarsal protection and cut resistance. For use only with EN 345-2, EN 346-2, or EN 347-2. Covers water resistance, protection again... | 1/15/1997 | MFAR - Author | ||
| BS 2782-1:Method 121A to 121C:1994 ISO 75-2:1993 : Methods of testing plastics — Part 1. Thermal properties Methods 121A to 121C. Determination of temperature of deflection under load of plastics and ebonite Printed version of this standard is available at Library. To request, please e-mail to referencepk@usm.my and include a copy of this record in your e-mail.
| 1/15/1994 | MJMS - Data Entry Person | ||
| BS ISO/IEC 13522-4:1996 - Information technology. Coding of multimedia and hypermedia information - MHEG registration procedure | NAAR - Data Entry Person | |||
| BS 5839-8:1998 Fire detection and fire alarm systems for buildings - Code of practice for the design, installation, commissioning, and maintenance of voice alarm systems Printed version of this standard is available at library, To request, please e-mail to reference@usm.my and include of this record in your e-mail.
| 11/30/2022 | NI - Data Entry Person |
Engineering Library USM @ 2017