Thumbnail | Name | Publication Date | First Public Date | Contributors |
BS EN 1653:1998 Copper and copper alloys. Plate, sheet and circles for boilers, pressure vessels and hot water storage units This European Standard specifies the composition, property requirements and tolerances on dimensions and form for copper and copper alloy plate, sheet and circles for boilers, pressure vessels, heat exchangers and hot water storage units.
The sampling procedures, the methods of test for verification of conformity to the requirements of this standa... | 3/21/2024 | 4/15/1998 | NI - Data Entry Person | |
BS 7012-6:1998 Light Microscopes. Specification For Spectral Filters his International Standard specifies recommended diameters to allow the interchangeability of spectral filters used in microscopes, as well as permissible filter material defects and processing faults.
This International Standard differentiates between two forms of spectral filters:
Form A: Filters to be used both in the observation light pat... | 1/15/2024 | 4/15/1998 | NI - Data Entry Person | |
BS EN 1652:1998 Copper and copper alloys. Plate, sheet, strip and circles for general purposes This British Standard is the English language version of EN 1652:1997. Together with BS EN 1653:1998 and BS EN 1654:1998 it supersedes BS 2870:1980 and BS 2875:1969 which are withdrawn.
The UK participation in its preparation was entrusted by Technical Committee NFE/34, Copper and copper alloys, to Subcommittee NFE/34/1, Wrought and unwrought copp... | 3/21/2024 | 4/15/1998 | NI - Data Entry Person | |
BS EN 936:1998 Chemicals used for treatment of water intended for human consumption. Carbon dioxide | 2/24/2023 | 4/15/1998 | NI - Data Entry Person | |
BS EN 1506:1998 Ventilation for buildings. Sheet metal air ducts and fittings with circular cross section. Dimensions | 6/4/2024 | 4/15/1998 | NI - Data Entry Person | |
BS EN 1664:1998 Prevailing torque type all-metal hexagon nuts with flange Defines the characteristics of prevailing torque type all-metal hexagon nuts with flange and threads from M5 up to M20 inclusive, in product grade A for threads up to and including M16 and product grade B for threads above M16 and with property classes 8, 10 and 12. | 5/28/2024 | 4/15/1998 | NI - Data Entry Person | |
BS 6782-10(1998) : 1998 - Binders for Paints - Part 10: Determination of Monomeric Diisocyanates in Polyisocyanate Resins Printed version of this is available at library. To request, please e-mail to referencepk@usm.my and include a copy of this record in your e-mail. | 2/13/2023 | 4/15/1998 | NI - Data Entry Person | |
BS EN 1666:1998 Prevailing torque type hexagon nuts with flange (with non-metallic insert) with metric fine pitch thread Defines the characteristics of prevailing torque type hexagon nuts with flange, with non-metallic annular insert and metric fine pitch thread with nominal thread diameters d from 8 mm up to and including 20 mm, in product grade A for d <= 16 mm and product grade B for d > 16 mm and with property classes 6, 8 and 10.
| 5/28/2024 | 4/15/1998 | NI - Data Entry Person | |
BS 6891:1998 -Specification for installation of low pressure gas pipework of up to 28 mm (R1) in domestic premises (2nd family gas) | 1/30/2023 | 4/15/1998 | NI - Data Entry Person | |
BS EN 934-2:1998 Admixtures for concrete, mortar and grout - Concrete admixtures. Definitions and requirements Printed version of this is available at library. To request, please e-mail to referencepk@usm.my and include a copy of this record in your e-mail.
| 2/20/2023 | 4/15/1998 | NI - Data Entry Person | |
BS EN 1663:1998 Prevailing torque type hexagon nuts with flange (with non-metallic insert) Defines the characteristics of prevailing torque type hexagon nuts with flange, with non-metallic annular insert and coarse threads from M5 to M20 inclusive, in product grade A for threads up to and including M16 and product grade B for threads above M16 and with property classes 8 and 10. | 5/28/2024 | 4/15/1998 | NI - Data Entry Person | |
BS EN 1661:1998 Hexagon Nuts With Flange (ISO/DIS 4161 : 1996, modified) his European Standard specifies the characteristics of hexagon nuts with flange, with threads from M5 to M20 inclusive, of product grade A for threads up to and including M16 and product grade B for threads above M16 and with property classes 8, 10, 12 and A2-70. | 5/28/2024 | 4/15/1998 | NI - Data Entry Person | |
BS 6043-1.6:1998 Methods Of Sampling And Test For Carbonaceous Materials Used In Aluminium Manufacture. Electrode Pitch. Determination Of Coking Value. Section 1.6 Determination Of Coking Value This international Standard specifies a method for determination of the coking value of pitch used for the production of aluminium. | 1/30/2023 | 3/15/1998 | NI - Data Entry Person | |
BS EN 54-2 : 1998 Fire detection and fire alarm systems - Part 2: Control and indicating equipment
This standard specifies requirements, methods of test, and performance criteria for control and indicating equipment (see item B of figure 1 of EN 54-1) for usein fire detection and fire alarm systems installed in buildings.
| 1/10/2024 | 3/15/1998 | NI - Data Entry Person | |
BS 7012-4.1:1998 Light microscopes. Specification for microscope objective and nosepiece screw threads - Screw thread type RMS (4/5 in x 1/36 in) | 1/15/2024 | 3/15/1998 | NI - Data Entry Person | |
BS EN 1385:1998 Helmets for canoeing and whitewater sports Describes requirements for helmets for canoeing and white water sports for use in waters of classes 1 to 4 as classified by Clause 4. The levels of protection recognize that most fatalities in canoeing and white water sports result from drowning after concussion and not from brain damage. | 5/22/2023 | 3/15/1998 | NI - Data Entry Person | |
BS EN 752-5:1998 Drain and sewer systems outside buildings - Rehabilitation Applies to drain and sewer systems operating essentially under gravity, from the point where the sewage leaves a building or roof drainage system or enters a road gully to its being discharged into a treatment works or receiving water. Includes drains and sewers below buildings, if they are not part of the drainage system of the building. Defines p... | 1/16/2024 | 3/15/1998 | NI - Data Entry Person | |
BS EN 1337-9:1998 Structural bearings Protection This Part of this European Standard deals with the measures to protect structural bearings from the effects of the environment and other external influences which would reduce their working life.
| 5/22/2023 | 3/15/1998 | NI - Data Entry Person | |
BS EN 1337-11:1998 Structural bearings Transport, storage and installation This standard is applicable to the transport, storage and installation of bearings used in the construction of bridges or of structures requiring comparable bearing systems.
| 5/22/2023 | 3/15/1998 | NI - Data Entry Person | |
EN 1303:1998 - Building hardware - Cylinders for locks - Requirements and test methods Specifies performance and other requirements for the strength, durability, performance and corrosion resistance of cylinders and their keys. | 5/22/2023 | 3/15/1998 | NI - Data Entry Person | |
BS EN 1441:1998 Medical devices. Risk analysis Defines a method for investigation by the manufacturer of the safety of a medical device, including in vitro diagnostic devices or accessories, by identification of hazards and estimation of the risks associated with the device. Particularly helpful in areas where relevant standards are unavailable or unused. Does not define levels of acceptability... | 10/26/2023 | 3/15/1998 | NI - Data Entry Person | |
BS 6911-12:1998 -Testing earth-moving machinery - Determination of turning dimensions of wheeled machines This International Standard specifies methods for determining the turning radius, turning diameter, machine clearance diameter, and inside and outside tyre clearance diameters, described in the horizontal plan by a wheeled earth-moving machine with its equipment and attachments when executing a turn.
This International Standard is applicable to ... | 1/30/2023 | 3/15/1998 | NI - Data Entry Person | |
BS 6916-7:1998 Chain Saws. Method Of Evaluating Engine Performance Including Fuel Consumption (British Standard) This International Standard specifies a method for testing the performance and fuel consumption of internal combustion engines used to power portable chain-saws. | 1/30/2023 | 3/15/1998 | NI - Data Entry Person | |
BS 7874:1998 Method of test for microbiological deterioration of elastomeric seals for joints in pipework and pipelines Gives a test procedure for microbiological deterioration for elastomeric joint seals. Applies to elastomeric components of composite or non-composite rings, seals, jointing gaskets and like components for use in sealing aqueous fluids in pipes and fittings. Applies to all categories of aqueous fluid, and includes raw and treated potable water, sewe... | 1/11/2024 | 3/15/1998 | NI - Data Entry Person | |
BS 7888-1:1998 LV and MV accessories for power cables with rated voltage from 0.6/1 kV (Um=1.2 kV) up to and including 20.8/36 kV (Um=42 kV) - General Provides generic definitions which apply to the BS 7888 series. | 1/11/2024 | 3/15/1998 | NI - Data Entry Person |