Thumbnail | Name | Publication Date | First Public Date | Contributors |
BS 7825-3.10:1998 Calibration of rubber and plastics test equipment. Calibration schedules - Conditioning, sample and test piece preparation Provides schedules for the calibration of equipment and apparatus used for the conditioning and preparation of samples and test pieces prior to conducting tests on plastics and rubber materials. | 1/11/2024 | 6/15/1998 | NI - Data Entry Person | |
BS 7825-3.4:1998 Calibration of rubber and plastics test equipment. Calibration schedules - Mechanical properties of rubber Provides schedules for the calibration of a range of methods of test for the evaluation of the mechanical properties of rubber. | 1/17/2024 | 6/15/1998 | NI - Data Entry Person | |
BS EN 1679-1:1998 Reciprocating internal combustion engines. Safety - Compression ignition engines This standard specifies the safety requirements for compression ignition engines and their essential auxiliaries used in all applications on land, underground and water, except engines used to propel road vehicles and aircraft. The special requirements needed to cover operation in potentially explosive atmospheres are not covered in this standard.
... | 5/28/2024 | 6/15/1998 | NI - Data Entry Person | |
BS EN 739:1998 Low-pressure hose assemblies for use with medical gases Defines requirements for low-pressure hose assemblies for use with oxygen, nitrous oxide, air for breathing, helium, carbon dioxide, xenon, specified mixtures of the gases listed previously, air for driving surgical tools, nitrogen for driving surgical tools and vacuum. Intended to ensure gas-specificity and for prevention of cross-connection betwe... | 1/16/2024 | 6/15/1998 | NI - Data Entry Person | |
BS EN 752-4:1998 Drain and sewer systems outside buildings - Hydraulic design and environmental considerations This standard includes national practice for drainage, taken from BS 8005 and BS 8301 which have been declared obsolescent. | 1/16/2024 | 6/15/1998 | NI - Data Entry Person | |
BS EN 1401-1:1998 Plastics piping systems for non-pressure underground drainage and sewerage. Unplasticized poly(vinylchloride) (PVC-U) - Specifications for pipes, fittings and the system This Part of prEN 1401 specifies the requirements for pipes, fittings and the system of unplasticized poly(vinyl chloride) (PVC-U) piping systems in the field of non-pressure underground drainage and sewerage outside the building structure (application area code "U"), and for non-pressure underground drainage and sewerage for both buried in ground ... | 10/23/2023 | 6/15/1998 | NI - Data Entry Person | |
BS EN 136:1998 Respiratory protective devices. Full face masks. Requirements, testing, marking This European Standard specifies minimum requirements for full face masks for respiratory protective devices. Full face masks for diving apparatus are not included in the scope of this European Standard. Laboratory and practical performance tests are included for the assessment of compliance with the requirements. | 1/10/2024 | 6/15/1998 | NI - Data Entry Person | |
BS EN 331:1998+A1:2010 Manually operated ball valves and closed bottom taper plug valves for gas installations for buildings This European Standard specifies the general requirements for the construction, performance and safety of ball valves and closed bottom taper plug valves. It also details the test methods and marking requirements.
It applies to metallic valves for domestic and commercial not directly buried installations inside or outside of buildings, using gases... | 1/10/2024 | 6/15/1998 | NI - Data Entry Person | |
BS EN 1254-5:1998 Copper and copper alloys - plumbing fittings. Fittings with short ends for capillary brazing to copper tubes Printed version of this is available at library. To request, please e-mail to referencepk@usm.my and include a copy of this record in your e-mail. | 5/19/2023 | 6/15/1998 | NI - Data Entry Person | |
BS 7825-3.8:1998 Calibration of rubber and plastics test equipment. Calibration schedules - Degradation and environmental properties Determination of environmental stress cracking resistance of plastics by a constant prestrain test. | 1/18/2024 | 6/15/1998 | NI - Data Entry Person | |
BS EN 1504-1:1998 Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control andevaluation of conformity - Definitions This standard defines terms relating to products and systems for repair, for use in maintenance and protection, restoration and strengthening of concrete structures. | 6/4/2024 | 6/15/1998 | NI - Data Entry Person | |
BS EN 521:1998 Specification for dedicated liquefied petroleum gas appliances. Portable vapour pressure liquefied petroleum gas appliances This standard specifies the construction and performance characteristics related to safety and the rational use of energy of portable appliances burning liquefied petroleum gases at the vapour pressure within the gas container. It also defines test methods and the requirements for marking and the information to be given in the instructions.
| 1/16/2024 | 6/15/1998 | NI - Data Entry Person | |
BS EN 1020:1998 Non-domestic gas-fired forced convection air heaters for space heating not exceeding a net heat input of 300 kW, incorporating a fan to assist transportation of combustion air and/or combustion products Defines the requirements and test methods for the safety and efficiency of non-domestic gas-fired air heaters having a fan to assist the transportation of combustion air and/or flue gases, hereafter referred to as "appliances". | 2/24/2023 | 6/15/1998 | NI - Data Entry Person | |
BS EN 737-1:1998 Medical gas pipeline systems Terminal units for compressed medical gases and vacuum Defines requirements for terminal units for use in medical gas pipeline systems defined in prEN 737-3 to be used with oxygen, nitrous oxide, air for breathing, carbon dioxide, oxygen/nitrous oxide mixture [50%/50% (V/V)], air for driving surgical tools, nitrogen for driving surgical tools and vacuum. It is intended to ensure the gas specific assemb... | 1/16/2024 | 6/15/1998 | NI - Data Entry Person | |
BS EN 675:1998 Glass in building. Determination of thermal transmittance (U value). Heat flow meter method | 1/16/2024 | 6/15/1998 | NI - Data Entry Person | |
BS EN 1270:1998 Playing field equipment. Basketball equipment. Functional and safety requirements, test methods Printed version of this is available at library. To request, please e-mail to referencepk@usm.my and include a copy of this record in your e-mail. | 5/19/2023 | 6/15/1998 | NI - Data Entry Person | |
BS EN 1442:1998 Transportable refillable welded steel cylinders for liquefied petroleum gas (LPG). Design and construction This European Standard specifies minimum requirements concerning material, design, construction and workmanship, procedure and test at manufacture of transportable refillable welded steel Liquefied Petroleum Gas (LPG) cylinders of water capacity from 0,5 l up to and including 150 l exposed to ambient temperatures. | 10/26/2023 | 6/15/1998 | NI - Data Entry Person | |
BS EN 1466:1998 Child care articles. Carry cots and stands. Safety requirements and test methods This European Standard specifies safety requirements and test methods for carry cots and other similar products which are intended for the purpose of carrying a child by hand and which may be used in conjunction with an appropriate stand; safety requirements and test methods are also specified for such stands. These products are fitted with two han... | 10/26/2023 | 6/15/1998 | NI - Data Entry Person | |
BS 7755-5.3:1998 Soil quality. Physical methods. Determination of particle density pecifies two methods for the determination of particle density of soils calculated from the mass and the volume of soil particles.
The first method (4.1) is applicable to fine soil (<2 mm diameter) and the second method (4.2) is applicable to both porous and nonporous gravel and stones (>2 mm diameter).
The particle density can be used for th... | 1/17/2024 | 5/15/1998 | NI - Data Entry Person | |
BS EN 1227:1998 Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes. Determination of the long-term ultimate relative ring deflection under wet conditions Printed version of this is available at library. To request, please e-mail to referencepk@usm.my and include a copy of this record in your e-mail.
| 2/27/2023 | 5/15/1998 | NI - Data Entry Person | |
BS EN 793:1998 Particular requirements for safety of medical supply units Applicable to medical supply units | 1/16/2024 | 5/15/1998 | NI - Data Entry Person | |
BS 7900:1998 Specification for examination of the surface texture of precision steel castings | 1/18/2024 | 5/15/1998 | NI - Data Entry Person | |
BS EN 1170-2:1998 Precast concrete products. Test method for glass-fibre reinforced cement-Measuring the fibre content in fresh GRC, 'Wash out test' Printed version of this is available at library. To request, please e-mail to referencepk@usm.my and include a copy of this record in your e-mail. | 8/10/2023 | 5/15/1998 | NI - Data Entry Person | |
BS EN 933-5:1998 Tests for geometrical properties of aggregates - Determination of percentage of crushed and broken surfaces in coarse aggregate particles Printed version of this is available at library. To request, please e-mail to referencepk@usm.my and include a copy of this record in your e-mail.
| 2/20/2023 | 5/15/1998 | NI - Data Entry Person | |
BS 7825-3.7:1998 Calibration of rubber and plastics test equipment. Calibration schedules - Rheological properties Provides schedules for the calibration of equipment and apparatus used for the measurement of the rheological properties of plastics and rubber materials. | 1/17/2024 | 5/15/1998 | NI - Data Entry Person |