Thumbnail | Name | Publication Date | First Public Date | Contributors |
BS EN 1337-9:1998 Structural bearings Protection This Part of this European Standard deals with the measures to protect structural bearings from the effects of the environment and other external influences which would reduce their working life.
| 5/22/2023 | 3/15/1998 | NI - Data Entry Person | |
BS EN 1385:1998 Helmets for canoeing and whitewater sports Describes requirements for helmets for canoeing and white water sports for use in waters of classes 1 to 4 as classified by Clause 4. The levels of protection recognize that most fatalities in canoeing and white water sports result from drowning after concussion and not from brain damage. | 5/22/2023 | 3/15/1998 | NI - Data Entry Person | |
BS EN 1441:1998 Medical devices. Risk analysis Defines a method for investigation by the manufacturer of the safety of a medical device, including in vitro diagnostic devices or accessories, by identification of hazards and estimation of the risks associated with the device. Particularly helpful in areas where relevant standards are unavailable or unused. Does not define levels of acceptability... | 10/26/2023 | 3/15/1998 | NI - Data Entry Person | |
BS EN 1470:1998 Textile floor coverings. Classification of needled floor coverings except for needled pile floor coverings his European Standard describes and specifies the requirements for classification of needled floor coverings in sheet form into use classes in respect of wear and appearance retention and a class for luxury rating. This European Standard is also applicable to tiles, the additional requirements for which are given in Annex A. This European Standard ... | 6/4/2024 | 3/15/1998 | NI - Data Entry Person | |
BS EN 1559-5:1998 Founding. Technical Conditions Of Delivery. Additional Requirements For Magnesium Alloy Castings his part of EN 1559 applies to castings made from magnesium alloys produced by sand casting, permanent mould casting, pressure die casting, centrifugal casting, continuous casting or investment casting. This standard specifies the additional technical delivery conditions for magnesium alloy castings. This standard does not apply to ingots, bars, bi... | 6/5/2024 | 3/15/1998 | NI - Data Entry Person | |
BS EN 1592-1:1998 Aluminium and aluminium alloys. HF seam welded tubes - Technical conditions for inspection and delivery | 6/5/2024 | 3/15/1998 | NI - Data Entry Person | |
BS EN 1592-2:1998 Aluminium and aluminium alloys. HF seam welded tubes - Mechanical properties Defines the mechanical properties of wrought aluminium alloy HF seam welded tubes for general engineering applications. Does not apply to irrigation and heat exchanger tubes. | 1/29/2024 | 3/15/1998 | NI - Data Entry Person | |
BS EN 1592-3:1998 Aluminium and aluminium alloys. HF seam welded tubes - Tolerances on dimensions and form for circular tubes Defines tolerances on dimensions and form of circular HF seam welded tubes having a diameter not exceeding 80 mm and wall thickness not exceeding 2.5 mm, which are made from rolled aluminium alloy strip longitudinally welded in a continuous process by passing an electric current across the abutting edges without adding filler metal. | 1/29/2024 | 3/15/1998 | NI - Data Entry Person | |
BS EN 1592-4:1998 Aluminium and aluminium alloys. HF seam welded tubes - Tolerances on dimensions and form for square, rectangular and shaped tubes Defines tolerances on dimensions and form of square, rectangular and shaped HF seam welded tubes, made from rolled aluminium alloy strip longitudinally welded in a continuous process by passing of an electric current across the abutting edges without the addition of filler metal. Applicable also to tubes made from aluminium alloy strips, which is p... | 1/29/2024 | 3/15/1998 | NI - Data Entry Person | |
BS EN 1598:1998 Health and safety in welding and allied processes. Transparent welding curtains, strips and screens for arc welding processes | 1/29/2024 | 3/15/1998 | NI - Data Entry Person | |
BS EN 1610:1998 Construction and testing of drains and sewers | 1/29/2024 | 3/15/1998 | NI - Data Entry Person | |
BS EN 1622:1998 Water analysis. Determination of the threshold odour number (TON) and threshold flavour number (TFN) | 1/29/2024 | 3/15/1998 | NI - Data Entry Person | |
BS EN 1648-1:1998 Leisure accommodation vehicles. 12 V direct current extra low voltage electrical installations - Caravans | 1/29/2024 | 3/15/1998 | NI - Data Entry Person | |
BS EN 1648-2:1998 Leisure accommodation vehicles. 12 V direct current extra low voltage electrical installations - Motor caravans | 1/29/2024 | 3/15/1998 | NI - Data Entry Person | |
BS EN 480-1:1998 Admixtures for concrete, mortar and grout. Test methods - Reference concrete and reference mortar for testing Specifies the constituent materials, the composition and the mixing method to produce reference concrete and reference mortar for testing the efficacy and the compatibility of admixtures in accordance with prEN 934-2. | 1/10/2024 | 3/15/1998 | ni - Data Entry Person | |
BS EN 480-12:1998 Admixtures for concrete, mortar and grout. Test methods - Determination of the alkali content of admixtures This European Draft Standard specifies a method for the determination of the alkali (sodium and potassium) content of admixtures for concrete, mortar and grouts in accordance with the series EN 934. | 1/10/2024 | 3/15/1998 | ni - Data Entry Person | |
BS EN 54-2 : 1998 Fire detection and fire alarm systems - Part 2: Control and indicating equipment
This standard specifies requirements, methods of test, and performance criteria for control and indicating equipment (see item B of figure 1 of EN 54-1) for usein fire detection and fire alarm systems installed in buildings.
| 1/10/2024 | 3/15/1998 | NI - Data Entry Person | |
BS EN 752-5:1998 Drain and sewer systems outside buildings - Rehabilitation Applies to drain and sewer systems operating essentially under gravity, from the point where the sewage leaves a building or roof drainage system or enters a road gully to its being discharged into a treatment works or receiving water. Includes drains and sewers below buildings, if they are not part of the drainage system of the building. Defines p... | 1/16/2024 | 3/15/1998 | NI - Data Entry Person | |
BS EN 993-10:1998 Methods of test for dense shaped refractory products - Determination of permanent change in dimensions on heating ALSO NUMBERED AS BS 1902-5.10: 1998 Defines three procedures for determining the permanent change in dimensions on heating of dense shaped refractory products. | 2/24/2023 | 3/15/1998 | NI - Data Entry Person | |
EN 1303:1998 - Building hardware - Cylinders for locks - Requirements and test methods Specifies performance and other requirements for the strength, durability, performance and corrosion resistance of cylinders and their keys. | 5/22/2023 | 3/15/1998 | NI - Data Entry Person | |
BS 6499:1998 - Metal screw necks, screw caps and inner seals for metal containers. Specification Printed version of this is available at library. To request, please e-mail to referencepk@usm.my and include a copy of this record in your e-mail. | 2/13/2023 | 4/15/1998 | NI - Data Entry Person | |
BS 6708:1998 - Flexible cables for use at mines and quarries Printed version of this is available at library. To request, please e-mail to referencepk@usm.my and include a copy of this record in your e-mail. | 2/13/2023 | 4/15/1998 | NI - Data Entry Person | |
BS 6782-10(1998) : 1998 - Binders for Paints - Part 10: Determination of Monomeric Diisocyanates in Polyisocyanate Resins Printed version of this is available at library. To request, please e-mail to referencepk@usm.my and include a copy of this record in your e-mail. | 2/13/2023 | 4/15/1998 | NI - Data Entry Person | |
BS 6891:1998 -Specification for installation of low pressure gas pipework of up to 28 mm (R1) in domestic premises (2nd family gas) | 1/30/2023 | 4/15/1998 | NI - Data Entry Person | |
BS 7012-11:1998 Light microscopes - Information provided to the user Defines the minimum required information provided to the user by the microscope manufacturer. Recommends further data additional to the mandatory microscope information. | 1/15/2024 | 4/15/1998 | NI - Data Entry Person |