Thumbnail | Name | Publication Date | First Public Date | Contributors |
BS 336:1989 - Specification for fire hose couplings and ancillary equipment Printed version of this is available at library. To request, please e-mail to referencepk@usm.my and include a copy of this record in your e-mail. | 6/25/2024 | 6/25/2024 | NAAR - Data Entry Person | |
MS ISO 15630-1:2012 : Steel for the reinforcement and prestressing of concrete - Test methods - Part 1: Reinforcing bars, wire rod and wire The adoption of the ISO Standard as a Malaysian Standard was recommended by the Technical Committee on Mechanical Testing of Metallic Materials under the authority of the Industry Standards Committee on Metallic Materials and Semi-Finished Products. This Malaysian Standard is identical with ISO 15630-1:2010, Steel for the reinforcement and prestres... | 6/10/2024 | NI - Data Entry Person | ||
EN ISO 6892-1:2017 Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1:2016) ISO 6892-1:2016 specifies the method for tensile testing of metallic materials and defines the mechanical properties which can be determined at room temperature.
NOTE Annex A contains further recommendations for computer controlled testing machines. | 6/10/2024 | 7/27/2016 | NI - Data Entry Person | |
BS ISO 13752:1998 Current Air quality. Assessment of uncertainty of a measurement method under field conditions using a second method as reference Defines a procedure for assessment of the measurement uncertainty of a calibrated measurement procedure (test method) applied under field conditions by means of a second method as a reference (reference method), which may not necessarily be a legally prescribed procedure. | 6/10/2024 | 6/15/1998 | NI - Data Entry Person | |
BS 9450:1998 Specification For Integrated Electronic Circuits And Micro-Assemblies Of Assessed Quality (Capability Approval Procedures). Generic Data And Methods Of Test Defines the approval procedure for integrated circuits, as defined in 1.1.3, specifically designed, ordered, produced, tested and supplied to customer procurement requirements declared within manufacturer's capability approval. Also, test methods, symbols, definitions and other material already published in BS 9400, offers supplementary information... | 6/10/2024 | 3/15/1998 | NI - Data Entry Person | |
BS 8218:1998 Code of practice for mastic asphalt roofing Gives recommendations for the use of mastic asphalt in roofing for both flat and sloping roofs and covers a variety of applications, including trafficked roofs such as roof top car parks. | 6/10/2024 | 1/15/1998 | NI - Data Entry Person | |
BS 7932:1998 Method for determination of polished paver value (PPV) Covers a laboratory procedure for determination of the polished paver value (PPV) of paving units by means of a flat-bed polishing machine in conjunction with pendulum test equipment. | 6/10/2024 | 9/15/1998 | NI - Data Entry Person | |
BS 7926:1998 Quantitative Micrographic Methods To Determine The Percentage Content Of Non-Metallic Inclusions In Cast Steel Defines two micrographic procedures for determination of the non-metallic inclusion content of cast steels. Defines numerical values of the area fraction of non-metallic inclusions present in samples of cast steels. | 6/10/2024 | 8/15/1998 | NI - Data Entry Person | |
BS 7925-2:1998 Software Testing. Software Component Testing This standard defines the process for software component testing using specified test case design and measurement techniques. This will enable users of the standard to directly improve the quality of their software testing, and improve the quality of their software products. | 6/10/2024 | 8/15/1998 | NI - Data Entry Person | |
BS EN 1592-1:1998 Aluminium and aluminium alloys. HF seam welded tubes - Technical conditions for inspection and delivery | 6/5/2024 | 3/15/1998 | NI - Data Entry Person | |
BS EN 1559-5:1998 Founding. Technical Conditions Of Delivery. Additional Requirements For Magnesium Alloy Castings his part of EN 1559 applies to castings made from magnesium alloys produced by sand casting, permanent mould casting, pressure die casting, centrifugal casting, continuous casting or investment casting. This standard specifies the additional technical delivery conditions for magnesium alloy castings. This standard does not apply to ingots, bars, bi... | 6/5/2024 | 3/15/1998 | NI - Data Entry Person | |
BS EN 1526:1997+A1:2008 Safety of industrial trucks. Additional requirements for automated functions on trucks Describes the controls and control systems for automated functions of industrial trucks with an operator (hereinafter referred to as "trucks").
| 6/5/2024 | 2/15/1998 | NI - Data Entry Person | |
BS EN 1525:1998 Safety of industrial trucks. Driverless trucks and their systems Pertains to all trucks and their systems except: a) trucks solely guided by mechanical means (rails, guides, etc); b) trucks operating in areas open to persons unaware of the hazards. | 6/5/2024 | 1/15/1998 | NI - Data Entry Person | |
BS EN 1518:1998 Non-destructive testing. Leak testing. Characterization of mass spectrometer leak detectors Defines terms and methods for characterization of mass spectrometer leak detectors (MSLD). Not intended as a complete set of specifications for an acceptance test, but describes methods for use without particular calibration equipment. | 6/5/2024 | 8/15/1998 | NI - Data Entry Person | |
BS EN 1506:1998 Ventilation for buildings. Sheet metal air ducts and fittings with circular cross section. Dimensions | 6/4/2024 | 4/15/1998 | NI - Data Entry Person | |
BS EN 1505:1998 Ventilation for buildings. Sheet metal air ducts and fittings with rectangular cross-section. Dimensions Defines dimensions of sheet metal air ducts and duct fittings, having rectangular cross-section. Applicable to ductwork used in ventilation and air conditioning systems in buildings for human occupancy. | 6/4/2024 | 4/15/1998 | NI - Data Entry Person | |
BS EN 1504-1:1998 Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control andevaluation of conformity - Definitions This standard defines terms relating to products and systems for repair, for use in maintenance and protection, restoration and strengthening of concrete structures. | 6/4/2024 | 6/15/1998 | NI - Data Entry Person | |
BS EN 1495:1997 Lifting platforms. Mast climbing work platforms Describes the special safety requirements for Mast Climbing Work Platforms (MCWP) which are temporarily installed and are manually or power operated and which are designed to be used by one or more persons from which to carry out work. | 6/4/2024 | 1/15/1998 | NI - Data Entry Person | |
BS EN 1470:1998 Textile floor coverings. Classification of needled floor coverings except for needled pile floor coverings his European Standard describes and specifies the requirements for classification of needled floor coverings in sheet form into use classes in respect of wear and appearance retention and a class for luxury rating. This European Standard is also applicable to tiles, the additional requirements for which are given in Annex A. This European Standard ... | 6/4/2024 | 3/15/1998 | NI - Data Entry Person | |
BS 7755-4.2.2:1998 Soil quality. Biological methods. Effects of pollutants on soil fauna - Determination of effects on reproduction on earthworms (Eisenia fetida) Covers a procedure for determination of the effects of substances on the reproduction, mortality, and growth of Eisenia fetida fetida and Eisenia fetida andrei by dermal and alimentary uptake, by means of an artificial soil substrate. Does not apply to volatile substances, that is substances where H (Henry's constant) or the air/water partition coe... | 6/4/2024 | 9/15/1998 | NI - Data Entry Person | |
BS 7755-3.13:1998 Soil quality. Chemical methods - Determination of cadmium, chromium, cobalt, copper, lead, manganese, nickel and zinc in aqua regia extracts of soil. Flame and electrothermal atomic absorption spectrometric methods This International Standard specifies two methods for the determination, by atomic absorption spectrometry, of one or more of cadmium, chromium, cobalt, copper, lead, manganese, nickel and zinc, in aqua regia extracts of soil obtained in accordance with ISO 11466. The choice of method for any element depends on the amount of that element expected t... | 6/4/2024 | 7/15/1998 | NI - Data Entry Person | |
BS EN 1679-1:1998 Reciprocating internal combustion engines. Safety - Compression ignition engines This standard specifies the safety requirements for compression ignition engines and their essential auxiliaries used in all applications on land, underground and water, except engines used to propel road vehicles and aircraft. The special requirements needed to cover operation in potentially explosive atmospheres are not covered in this standard.
... | 5/28/2024 | 6/15/1998 | NI - Data Entry Person | |
BS EN 1678:1998 Food processing machinery. Vegetable cutting machines. Safety and hygiene requirements This European Standard specifies the safety and hygiene requirements for the design and manufacture of vegetable cutting machines which are transportable and have a maximum rated power less than 3 kW.
This European Standard deals with machines intended for cutting, shredding, dicing, chipping and grating of food products in which the product pas... | 5/28/2024 | 8/15/1998 | NI - Data Entry Person | |
BS EN 1667:1998 Prevailing torque type all-metal hexagon nuts with flange with metric fine pitch thread Defines the characteristics of prevailing torque type all metal hexagon nuts with flange and metric fine pitch thread with nominal thread diameters d from 8 mm up to and including 20 mm, in product grade A for sizes d up to and including 16 mm and product grade B for sizes d > 16 mm and with property classes 6, 8 and 10. | 5/28/2024 | 4/15/1998 | NI - Data Entry Person | |
BS EN 1666:1998 Prevailing torque type hexagon nuts with flange (with non-metallic insert) with metric fine pitch thread Defines the characteristics of prevailing torque type hexagon nuts with flange, with non-metallic annular insert and metric fine pitch thread with nominal thread diameters d from 8 mm up to and including 20 mm, in product grade A for d <= 16 mm and product grade B for d > 16 mm and with property classes 6, 8 and 10.
| 5/28/2024 | 4/15/1998 | NI - Data Entry Person |