Thumbnail | Name | Publication Date | First Public Date | Contributors |
BS EN 752-4:1998 Drain and sewer systems outside buildings - Hydraulic design and environmental considerations This standard includes national practice for drainage, taken from BS 8005 and BS 8301 which have been declared obsolescent. | 1/16/2024 | 6/15/1998 | NI - Data Entry Person | |
BS EN 752-5:1998 Drain and sewer systems outside buildings - Rehabilitation Applies to drain and sewer systems operating essentially under gravity, from the point where the sewage leaves a building or roof drainage system or enters a road gully to its being discharged into a treatment works or receiving water. Includes drains and sewers below buildings, if they are not part of the drainage system of the building. Defines p... | 1/16/2024 | 3/15/1998 | NI - Data Entry Person | |
BS EN 752-6:1998 Drain and sewer systems outside buildings - Pumping installations Establishes the principles of wastewater pumping for gravity drain and sewer systems from entry as wastewater to discharge for treatment. | 1/16/2024 | 9/15/1998 | NI - Data Entry Person | |
BS EN 752-7:1998 Drain and sewer systems outside buildings - Maintenance and operations Establishes the principles of maintenance and operation of wastewater drainage. | 1/16/2024 | 9/15/1998 | NI - Data Entry Person | |
BS EN 753-1:1997- Identification card systems. Intersector thin flexible cards - Part 1. General technical specifications Printed version of this standard is available at Library. To request, please e-mail to referencepk@usm.my and include a copy of this record in your e-mail. | 5/12/2023 | MFAR - Data Entry Person | ||
BS EN 753-2:1997- Identification card systems. Intersector thin flexible cards - Part 2. Magnetic recording technique Printed version of this is available at library. To request, please e-mail to referencepk@usm.my and include a copy of this record in your e-mail. | 5/12/2023 | 10/15/1997 | MFAR - Data Entry Person | |
BS EN 754-1:1997- Aluminium and aluminium alloys. Cold drawn rod/bar and tube - Part 1. Technical conditions for inspection and delivery Printed version of this is available at library. To request, please e-mail to referencepk@usm.my and include a copy of this record in your e-mail. | 5/12/2023 | 9/15/1997 | MFAR - Data Entry Person | |
BS EN 754-2:1997- Aluminium and aluminium alloys. Cold drawn rod/bar and tube - Part 2. Mechanical properties Printed version of this standard is available at Library. To request, please e-mail to referencepk@usm.my and include a copy of this record in your e-mail. | 5/12/2023 | MFAR - Data Entry Person | ||
BS EN 754-3:1996- Aluminium and aluminium alloys. Cold drawn rod/bar and tube - Round bars, tolerances on dimensions and form Printed version of this is available at library. To request, please e-mail to referencepk@usm.my and include a copy of this record in your e-mail. | 6/15/1996 | 12/7/2022 | NAAR - Data Entry Person | |
BS EN 754-4:1996- Aluminium and aluminium alloys. Cold drawn rod/bar and tube - Square bars, tolerances on dimensions and form Printed version of this is available at library. To request, please e-mail to referencepk@usm.my and include a copy of this record in your e-mail. | 6/15/1996 | 12/7/2022 | NAAR - Data Entry Person | |
BS EN 754-5:1996- Aluminium and aluminium alloys. Cold drawn rod/bar and tube - Rectangular bars, tolerances on dimensions and form Printed version of this is available at library. To request, please e-mail to referencepk@usm.my and include a copy of this record in your e-mail. | 6/15/1996 | 12/7/2022 | NAAR - Data Entry Person | |
BS EN 754-5:1996- Aluminium and aluminium alloys. Cold drawn rod/bar and tube - Rectangular bars, tolerances on dimensions and form Printed version of this is available at library. To request, please e-mail to referencepk@usm.my and include a copy of this record in your e-mail. | 6/15/1996 | 12/7/2022 | NAAR - Data Entry Person | |
BS EN 754-6:1996- Aluminium and aluminium alloys. Cold drawn rod/bar and tube - Hexagonal bars, tolerances on dimensions and form Printed version of this is available at library. To request, please e-mail to referencepk@usm.my and include a copy of this record in your e-mail. | 6/15/1996 | 12/7/2022 | NAAR - Data Entry Person | |
BS EN 755-1:1997- Aluminium and aluminium alloys. Extruded rod/bar, tube and profiles - Part 1. Technical conditions for inspection and delivery Printed version of this standard is available at Library. To request, please e-mail to referencepk@usm.my and include a copy of this record in your e-mail. | 5/12/2023 | MFAR - Data Entry Person | ||
BS EN 755-2:1997- Aluminium and aluminium alloys. Extruded rod/bar, tube and profiles - Part 2. Mechanical properties Printed version of this is available at library. To request, please e-mail to referencepk@usm.my and include a copy of this record in your e-mail. | 5/12/2023 | MFAR - Data Entry Person | ||
BS EN 755-3:1996- Aluminium and aluminium alloys. Extruded rod/bar, tube and profiles - Round bars, tolerances on dimensions and form Printed version of this is available at library. To request, please e-mail to referencepk@usm.my and include a copy of this record in your e-mail. | 6/15/1996 | 12/7/2022 | NAAR - Data Entry Person | |
BS EN 755-4:1996- Aluminium and aluminium alloys. Extruded rod/bar, tube and profiles - Square bars, tolerances on dimensions and form Printed version of this is available at library. To request, please e-mail to referencepk@usm.my and include a copy of this record in your e-mail. | 6/15/1996 | 12/7/2022 | NAAR - Data Entry Person | |
BS EN 755-5:1996- Aluminium and aluminium alloys. Extruded rod/bar, tube and profiles - Rectangular bars, tolerances on dimensions and form Printed version of this is available at library. To request, please e-mail to referencepk@usm.my and include a copy of this record in your e-mail. | 6/15/1996 | 12/7/2022 | NAAR - Data Entry Person | |
BS EN 755-6:1996- Aluminium and aluminium alloys. Extruded rod/bar, tube and profiles - Hexagonal bars, tolerances on dimensions and form Printed version of this is available at library. To request, please e-mail to referencepk@usm.my and include a copy of this record in your e-mail. | 6/15/1996 | 12/7/2022 | NAAR - Data Entry Person | |
BS EN 756:1996- Welding consumables. Wire electrodes and wire-flux combinations for submerged arc welding of non alloy and fine grain steels. Classification Printed version of this is available at library. To request, please e-mail to referencepk@usm.my and include a copy of this record in your e-mail. | 8/15/1996 | 12/7/2022 | NAAR - Data Entry Person | |
BS EN 757:1997- Welding consumables. Covered electrodes for manual metal arc welding of high strength steels. Classification Printed version of this is available at library. To request, please e-mail to referencepk@usm.my and include a copy of this record in your e-mail. | 5/12/2023 | MFAR - Data Entry Person | ||
BS EN 758:1997- Welding consumables. Tubular cored electrodes for metal arc welding with and without a gas shield of non-alloy and fine grain steels. Classification Printed version of this is available at library. To request, please e-mail to referencepk@usm.my and include a copy of this record in your e-mail. | 5/12/2023 | MFAR - Data Entry Person | ||
BS EN 759:1997- Welding consumables. Technical delivery conditions for welding filler metals. Type of product, dimensions, tolerances and marking Printed version of this is available at library. To request, please e-mail to referencepk@usm.my and include a copy of this record in your e-mail. | 9/15/1997 | 5/12/2023 | MFAR - Data Entry Person | |
BS EN 760:1996- Welding consumables. Fluxes for submerged arc welding. Classification Printed version of this is available at library. To request, please e-mail to referencepk@usm.my and include a copy of this record in your e-mail. | 10/15/1996 | 12/7/2022 | NAAR - Data Entry Person | |
BS EN 761:1995 Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes. Determination of the creep factor under dry conditions Printed version of this is available at library. To request, please e-mail to referencepk@usm.my and include a copy of this record in your e-mail. | 7/15/1995 | 4/7/2023 | MAR - Data Entry Person |