(For USM Staff/Student Only)
Browsing/Searching: EngLib USM > @i* Standard
Viewing: 5976 - 6000 of 6610
First
< Previous
....
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
....
Next >
Last
| Thumbnail | Name | Publication Date | First Public Date
 | Contributors |
| BS EN 1424:1998 Road marking materials. Premix glass beads This European Standard specifies the requirements for laboratory tests (production control) and qualification procedures for the premixed glass beads used in road marking materials.
The requirements taken into consideration in this standard are:
— granulometry;
— refractive index of the glass;
— chemical resistance;
— quality;
— surface treat... | 10/26/2023 | 1/15/1998 | NI - Data Entry Person | |
| BS EN 1423:1998 Road marking materials. Drop on materials. Glass beads, antiskid aggregates and mixtures of the two BS EN 1423:1998 specifies the requirements for laboratory tests (production control) and qualification procedures for the following drop on materials used in road markings. These materials are dropped on to paints, thermoplastics, cold plastics and any other marking product applied in a liquid state, immediately after application to the road surfac... | 10/26/2023 | 1/15/1998 | NI - Data Entry Person | |
| BS EN 179:1998 Building hardware. Emergency exit devices operated by a lever handle or push pad. Requirements and test methods Specifies requirements for the manufacture, performance and testing of emergency devices mechanically operated by either a lever handle or a push pad, for use where a panic situation is unlikely to arise. Emergency devices covered are for use on hinged or pivoted door leaves only, not exceeding 200kg in mass, 2500mm in height and 1300mm in width. | 1/10/2024 | 1/15/1998 | NI - Data Entry Person | |
| BS EN 145:1998 Respiratory protective devices. Self-contained closed-circuit breathing apparatus compressed oxygen or compressed oxygen-nitrogen type. Requirements, testing, marking This European Standard specifies minimum requirements for self-contained closed-circuit breathing apparatus, compressed oxygen (O2) and compressed oxygen-nitrogen (O2 - N2) types, used as respiratory protective devices, except escape apparatus and diving apparatus. Laboratory and practical performance tests are included for the assessment of compl... | 1/10/2024 | 1/15/1998 | NI - Data Entry Person | |
| BS EN 669:1998 Resilient floor coverings. Determination of dimensional stability of linoleum tiles caused by changes in atmospheric humidity Defines a procedure for determination of the dimensional stability of linoleum tiles caused by changes in atmospheric humidity. | 1/10/2024 | 1/15/1998 | NI - Data Entry Person | |
| BS EN 1264-3:1998 Floor heating. Systems and components - Dimensioning Printed version of this is available at library. To request, please e-mail to referencepk@usm.my and include a copy of this record in your e-mail. | 5/19/2023 | 1/15/1998 | NI - Data Entry Person | |
| DD 243:1998 - Code of practice for intruder alarm systems signalling to alarm receiving centres DD 243 gives recommendations for the design, installation and configuration of intruder alarm systems that incorporate alarm confirmation technology for the purpose of signalling notification of an alarm activation to an alarm receiving centre (ARC) and requiring Police Response.
DD 243 includes recommendations intended to minimise the likelihoo... | 5/22/2023 | 1/15/1998 | NI - Data Entry Person | |
| BS EN 1398 1998 - Dock Levellers Printed version of this is available at library. To request, please e-mail to referencepk@usm.my and include a copy of this record in your e-mail.
| 8/23/2023 | 1/15/1998 | NI - Data Entry Person | |
| BS EN 1264-2:1998 Floor heating. Systems and components - Determination of the thermal output Printed version of this is available at library. To request, please e-mail to referencepk@usm.my and include a copy of this record in your e-mail. | 5/19/2023 | 1/15/1998 | NI - Data Entry Person | |
| BS EN 1264-1:1998 Floor heating. Systems and components - Definitions and symbols Printed version of this is available at library. To request, please e-mail to referencepk@usm.my and include a copy of this record in your e-mail. | 5/19/2023 | 1/15/1998 | NI - Data Entry Person | |
| BS EN 1525:1998 Safety of industrial trucks. Driverless trucks and their systems Pertains to all trucks and their systems except: a) trucks solely guided by mechanical means (rails, guides, etc); b) trucks operating in areas open to persons unaware of the hazards. | 6/5/2024 | 1/15/1998 | NI - Data Entry Person | |
| BS EN 1463-1:1998 Road marking materials. Retroreflecting road studs - Initial performance requirements This European Standard specifies the initial performance requirements and laboratory test methods for retroreflecting road studs intended for use as permanent and temporary road marking materials.
| 10/26/2023 | 1/15/1998 | NI - Data Entry Person | |
| BS EN 476:1998 General requirements for components used in discharge pipes, drains and sewers for gravity systems | 1/10/2024 | 1/15/1998 | NI - Data Entry Person | |
| BS EN 1177:1998 Impact absorbing playground surfacing. Safety requirements and test methods This European Standard specifies requirements for surfacing to be used in children's playgrounds and specific requirements for areas where impact attenuation is necessary. It suggests the factors to be considered when selecting playground surfacing and gives a method of test by which the impact attenuation can be determined. This test gives a criti... | 10/16/2023 | 1/15/1998 | NI - Data Entry Person | |
| BS 7911:1998 Specification for organizations conducting market research Defines requirements for conducting market research, especially specifying minimum service levels for quality assurance executive responsibilities, data collection and data processing for application in market research projects. | 1/18/2024 | 1/15/1998 | NI - Data Entry Person | |
| BS EN 1399:1998 Resilient Floor Coverings. Determination Of Resistance To Stubbed And Burning Cigarettes he document specifies methods for determining the stubbed cigarette resistance and burning cigarette resistance of resilient floor coverings. | 10/23/2023 | 1/15/1998 | NI - Data Entry Person | |
| BS EN 977:1998 Underground tanks of glass-reinforced plastics (GRP). Method for one side exposure to fluids Describes the test method to measure the one side exposure of glass-reinforced thermosetting resins to fluids. | 2/24/2023 | 1/15/1998 | NI - Data Entry Person | |
| BS EN 1067:1998 Adhesives - Examination and preparation of samples for testing Printed version of this is available at library. To request, please e-mail to referencepk@usm.my and include a copy of this record in your e-mail. | 8/10/2023 | 1/15/1998 | NI - Data Entry Person | |
| BS DD242 : 1998 - Code of practice for intruder alarm systems for high security areas Specifies criteria for definition and inspection of intruder alarms in high security premises which do not need to conform fully to BS 7042:1988. | 5/22/2023 | 1/15/1998 | NI - Data Entry Person | |
| BS EN 415-4:1998 Safety of packaging machines - Palletizers and depalletizers Defines safety requirements for designing, manufacturing and information for safe use of palletizers, depalletizers, and stackers/unstackers of empty pallets integrated or not into a (de)palletizer. Applicable to automatic and semi-automatic (de)palletizers, taking into account hazards possible during setting, commissioning and decommissioning adju... | 1/10/2024 | 1/15/1998 | NI - Data Entry Person | |
| BS EN 1391:1998 - Adhesives for leather and footwear materials. A method for evaluating the bondability of materials. Minimum requirements and material classification Printed version of this is available at library. To request, please e-mail to referencepk@usm.my and include a copy of this record in your e-mail.
| 8/23/2023 | 1/12/1998 | NI - Data Entry Person | |
| BS EN 1127-1:2007 Explosive atmospheres - Explosion prevention and protection. Basic concepts and methodology Printed version of this is available at library. To request, please e-mail to referencepk@usm.my and include a copy of this record in your e-mail. | 8/10/2023 | 1/8/1998 | NI - Data Entry Person | |
| MS ISO 14050: 2001 Environmental management-vocabulary (ISO 14050: 1998, IDT) Printed version of this standard is available at Library. To request, please e-mail to adminpk@usm.my and include a copy of this record in your e-mail. | 11/16/2020 | 1/5/1998 | ||
| MS ISO 8985: 2000 Plastics-Ethylene/vinyl acetate copolymer (EVAC) thermoplastics-Determination of vinyl acetate content (ISO 8595: 1998, IDT) Printed version of this standard is available at Library. To request, please e-mail to adminpk@usm.my and include a copy of this record in your e-mail. | 11/11/2020 | 1/3/1998 | ||
| BS EN 953 : 1998 - Safety of machinery - guards - general requirements for the design and construction of fixed and movable guards Specifies general requirements for the design and construction of guards provided primarily to protect persons from mechanical hazards. Applies primarily to machines which are manufactured after the date of issue of this standard. Attention is drawn to the use of guards to minimise exposure to non-mechanical hazards. The requirements are applicable... | 2/24/2023 | 1/1/1998 | NI - Data Entry Person |
First
< Previous
....
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
....
Next >
Last
Engineering Library USM @ 2017